Send Email
0804605761180% Response Rate
Search
DWYER INSTRUMENTS AUTHORIZED DISTRIBUTOR GANDHI NAGAR DELHI
Providing you the best range of dwyer magnehelic gage, dwyer magnehelic differential pressure gauge in thiruvananthapuram kerala, magnehelic differential pressure gauge in olpad industrial estate surat gujarat, dwyer magnehelic gage in pithampur madhya pradesh, dwyer magnehelic gage in beed maharashtra and dwyer magnehelic gage in warangal telangana with effective & timely delivery.Dwyer Magnehelic Gage
REQUEST CALLBACK
-
-
-
- +8
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 12 Piece |
| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Mounting | Back |
| Model Name/Number | SERIES 2000 |
| Window Material | Acrylic |
| Weight | 700 G |
| Country of Origin | Made in India |
| MAGNEHELIC DIFFERENTIAL PRESSURE GAGES HSN CODE | 90262000 |
Dwyer Magnehelic Gage In Tirur Kerala
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES
Indicate Positive, Negative or Differential, Accurate within 1%
- No Power Required
- Low Cost
- Used in Isolation/ Hospital Environments and Temporary Units (No Power Required)
Select The Series 2000 Magnehelic® Gage For a Versatile Low Differential Pressure Gage With a Wide Choice of 81 Models And 27 Options To Choose From. Using Dwyer’s Simple, Frictionless Magnehelic® Gage Movement, It Quickly Indicates Air Or Noncorrosive Gas Pressures--Either Positive, Negative (Vacuum) or Differential. The Design Resists Shock, Vibration, Over-Pressures And is Weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage Option For An Accuracy Within 1% of Full Scale, Located Below in the Product Configurator. Also Included With The –HA Option At No Extra Cost Are a Mirrored Scale Overlay and a 6 Point Calibration Certificate.
NIST CALIBRATION Available In Product Configurator.
Note: May Be Used With Hydrogen. Order a Buna-N Diaphragm. Pressures Must Be Less Than 35 PSI.
Please See Series AT-2000 for ATEX Approved.
PRODUCT APPLICATIONS
- Filter Monitoring
- Air Velocity with Dwyer Pitot Tube
- Blower Vacuum Monitoring
- Fan Pressure Indication
- Duct,Room or Building Pressures
- Clean Room Positive Pressure Indication
SPECIFICATIONS
- Service:Air And Non-Combustible, Compatible Gases (Natural Gas Option Available). Note: May Be Used With Hydrogen. Order a Buna-N Diaphragm. Pressures Must Be Less Than 35 PSI.
- Wetted Materials:Consult Factory.
- Housing:Die Cast Aluminum Case And Bezel, With Acrylic Cover, Exterior Finish is Coated Gray To Withstand 168 Hour Salt Spray Corrosion Test.
- Accuracy:±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100PA, -125PA, -10MM and ±4% (-HA ±2%) on -00, -60PA, -6MM Ranges), Throughout Range at 70°F (21.1°C).
- Pressure Limits:-20 in Hg. to 15 PSIG.† (-0.677 bar to 1.034 bar); MP Option: 35 PSIG (2.41 Bar), HP Option: 80 PSIG (5.52 Bar).
- Enclosure Rating:IP67.
- Overpressure:Relief Plug Opens At Approximately 25 PSIG (1.72 Bar), Standard Gages Only. See Overpressure Protection Note On Catalog Page.
- Temperature Limits:20 to 140°F (-6.67 to 60°C). -20°F (-28°C) With Low Temperature Option.
- Size:4" (101.6 MM) Diameter Dial Face.
- Mounting Orientation:Diaphragm In Vertical Position. Consult Factory For Other Position Orientations.
- Process Connections:1/8" Female NPT Duplicate High And Low Pressure Taps - One Pair Side And One Pair Back.
- Weight:1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
- Standard Accessories:Two 1/8" NPT Plugs For Duplicate Pressure Taps, Two 1/8" Pipe Thread To Rubber Tubing Adapters And Three Flush Mounting Adapterswith Screws. (Mounting And Snap Ring Retainer Substituted For Three Adapters In MP & HP Gage Accessories.)
- Agency Approval:Meets The Technical Requirements Of EU Directive 2011/65/EU (RoHS II).
- Note: -SP Models Not RoHS Approved.Note: For Applications With High Cycle Rate Within Gage Total Pressure Rating, Next Higher Rating Is Recommended. See Options Page.
Additional Information:
- Item Code: Dwyer-Magnehelic-Gage-In-Tirur-Kerala
- Production Capacity: www.envirotechindustrialproducts.co.in
- Delivery Time: www.envirotechindustrialproduct.co.in
- Packaging Details: www.envirotechindustrialproduct.in
Yes! I am interested
Dwyer Magnehelic Differential Pressure Gauge In Thiruvananthapuram Kerala
REQUEST CALLBACK
-
-
-
- +9
Get Best Quote
Approx. Rs 6,590 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 12 Piece |
| Dial Size | 4 inch / 100 mm |
| Brand | DWYER USA |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH |
| Use | HVAC Systems |
| Display Type | Analog |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Mounting | Back |
| Model Name/Number | SERIES 2000 |
| Pointer Material | Die Cast Aluminum Case And Bezel (ABS For P2000), With Acrylic Cover |
| Weight | 700 G |
| Window Material | Acrylic |
| Wetted Parts | Die Cast Aluminum Case And Bezel (ABS For P2000), With Acrylic Cover |
| MAGNEHELIC DIFFERENTIAL PRESSURE GAGES HSN CODE | 90262000 |
| For More Items Download Dwyer Catalogue | https://www.dwyer-inst.com/catalog/ |
Dwyer Magnehelic Differential Pressure Gauge In Thiruvananthapuram Kerala
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES
Indicate Positive, Negative or Differential, Accurate within 1%
- No Power Required
- Low Cost
- Used in Isolation/ Hospital Environments and Temporary Units (No Power Required)
Select The Series 2000 Magnehelic® Gage For a Versatile Low Differential Pressure Gage With a Wide Choice of 81 Models And 27 Options To Choose From. Using Dwyer’s Simple, Frictionless Magnehelic® Gage Movement, It Quickly Indicates Air Or Noncorrosive Gas Pressures--Either Positive, Negative (Vacuum) or Differential. The Design Resists Shock, Vibration, Over-Pressures And is Weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage Option For An Accuracy Within 1% of Full Scale, Located Below in the Product Configurator. Also Included With The –HA Option At No Extra Cost Are a Mirrored Scale Overlay and a 6 Point Calibration Certificate.
NIST CALIBRATION Available In Product Configurator.
Note: May Be Used With Hydrogen. Order a Buna-N Diaphragm. Pressures Must Be Less Than 35 PSI.
Please See Series AT-2000 for ATEX Approved.
PRODUCT APPLICATIONS
- Filter Monitoring
- Air Velocity with Dwyer Pitot Tube
- Blower Vacuum Monitoring
- Fan Pressure Indication
- Duct,Room or Building Pressures
- Clean Room Positive Pressure Indication
SPECIFICATIONS
- Service:Air And Non-Combustible, Compatible Gases (Natural Gas Option Available). Note: May Be Used With Hydrogen. Order a Buna-N Diaphragm. Pressures Must Be Less Than 35 PSI.
- Wetted Materials:Consult Factory.
- Housing:Die Cast Aluminum Case And Bezel, With Acrylic Cover, Exterior Finish is Coated Gray To Withstand 168 Hour Salt Spray Corrosion Test.
- Accuracy:±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100PA, -125PA, -10MM and ±4% (-HA ±2%) on -00, -60PA, -6MM Ranges), Throughout Range at 70°F (21.1°C).
- Pressure Limits:-20 in Hg. to 15 PSIG.† (-0.677 bar to 1.034 bar); MP Option: 35 PSIG (2.41 Bar), HP Option: 80 PSIG (5.52 Bar).
- Enclosure Rating:IP67.
- Overpressure:Relief Plug Opens At Approximately 25 PSIG (1.72 Bar), Standard Gages Only. See Overpressure Protection Note On Catalog Page.
- Temperature Limits:20 to 140°F (-6.67 to 60°C). -20°F (-28°C) With Low Temperature Option.
- Size:4" (101.6 MM) Diameter Dial Face.
- Mounting Orientation:Diaphragm In Vertical Position. Consult Factory For Other Position Orientations.
- Process Connections:1/8" Female NPT Duplicate High And Low Pressure Taps - One Pair Side And One Pair Back.
- Weight:1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
- Standard Accessories:Two 1/8" NPT Plugs For Duplicate Pressure Taps, Two 1/8" Pipe Thread To Rubber Tubing Adapters And Three Flush Mounting Adapterswith Screws. (Mounting And Snap Ring Retainer Substituted For Three Adapters In MP & HP Gage Accessories.)
- Agency Approval:Meets The Technical Requirements Of EU Directive 2011/65/EU (RoHS II).
- Note: -SP Models Not RoHS Approved.Note: For Applications With High Cycle Rate Within Gage Total Pressure Rating, Next Higher Rating Is Recommended. See Options Page.
Additional Information:
- Item Code: Magnehelic-Gauge-In-Thiruvananthapuram-Kerala
- Production Capacity: www.envirotechdelhi.net
- Delivery Time: www.envirotechindia.info
- Packaging Details: www.envirotechdelhi.info
Yes! I am interested
Magnehelic Differential Pressure Gauge In Olpad Industrial Estate Surat Gujarat
REQUEST CALLBACK
-
-
-
- +9
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Differential Range | 0-125 PASCAL |
| Dial Size | 100 mm |
| Output Signal | No Output |
| Process Connection | 1/4 inch NPT |
| Mounting Type | Panel |
| Media Type | Air |
| Enclosure Rating | IP65 |
| Application | Filter |
| Brand | Dwyer |
| Usage/Application | Duct,Room or Building Pressures |
| Connection Type | NPT |
| Connection Size | 1/8" female NPT duplicate high and low pressure taps |
| Dial Type | Dry |
| Mounting | Back |
| Pointer Material | Aluminium Black |
| Window Material | Acrylic |
| Weight | 550 g |
| Size | 4" (101.6 mm) diameter dial face |
| DWYER OMEGA Magnehelic Differential Pressure Gauge HSN CODE | 90262000 |
| Process Connections | 1/8" female NPT duplicate high and low pressure taps |
| Pressure Limits | -20 in Hg to 15 psig (-0.677 bar to 1.034 bar) |
| Ambient Temperature | -21 ~140 -6 ~60 |
| Rated Pressure | -20 inHg~30 inHg (-68~103KPa) |
| Overpressure | Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa) |
| Housing | Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 16 |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI / MBAR |
| Country of Origin | Made in India |
Magnehelic Differential Pressure Gauge In Olpad Industrial Estate Surat Gujarat
Series 2000 DWYER Magnehelic Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine,Resistance of Filter,Wind Speed,Furnace Pressure,Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System.Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment.There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materi
SPECIFICATION
- Ambient Temperature - -21~140-6~60
- Rated Pressure -20 inHg~30 inHg (-68~103KPa
- Overpressure-Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa
- Process Connections - 1/8" Female NPT Duplicate High And Low Pressure Taps-One Pair Side And One Pair Back
- Housing - Die cast aluminum case and bezel, with acrylic cover,Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
- Accuracy - ±2% of full span at 70 (21 (±3% on -0,and ±4% on-00)
- Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.
FEATURES
- OEM/ODM
- There Is No Need To Fill Liquid To Gauge.
- The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure
- It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure
- To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed
- Exact And Stable Fixed Position Of Needle.
- The Gauge Has Great Antiknock Characteristics.
- There Are 81 Types Of Ranges.
- Minimum is 0-60 Pa And Maximum is 0-21-KPa
PRODUCT APPLICATIONS
- Filter Monitoring
- Air Velocity With Pitot Tube
- Blower Vacuum Monitoring
- Fan Pressure Indication
- Duct,Room or Building Pressures
- Clean Room Positive Pressure Indication
MODELS & ORDERING
DWYER By Model Number Popularity
- FILTER BY
- Range-Inches of Water
|
Model |
Description |
|
2000-0 |
DPG,Range 0-0.50″ w.c., minor divisions .01,calibrated for vertical scale position. |
|
2000-00 |
DPG,Range 0-0.25″ w.c.,minor divisions .005,calibrated for vertical scale position. |
|
2001 |
DPG,Range 0-1.0″ w.c.,minor divisions .02. |
|
2002 |
DPG,Range 0-2.0″ w.c.,minor divisions .05. |
|
2003 |
DPG,Range 0-3.0″ w.c.,minor divisions .10. |
|
2004 |
DPG,Range 0-4.0″ w.c.,minor divisions .10. |
|
2005 |
DPG,Range 0-5.0″ w.c.,minor divisions .10. |
|
2006 |
DPG,Range 0-6.0″ w.c.,minor divisions .20. |
Additional Information:
- Item Code: Magnehelic-DPG-In-Olpad-Industrial-Estate-Surat-Gujarat
- Production Capacity: www.envirotechindustrialproducts.co.in
- Delivery Time: www.envirotechindustrialproduct.in
- Packaging Details: www.envirotechindustrialproduct.co.in
Yes! I am interested
Dwyer Magnehelic Gage In Pithampur Madhya Pradesh
REQUEST CALLBACK
-
-
-
- +9
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Brand | Dwyer USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Country of Origin | Made in India |
| Process Connections | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Housing | Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 16 |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH |
| MAGNEHELIC DIFFERENTIAL PRESSURE GAGES HSN CODE | 90262000 |
Dwyer Magnehelic Gage In Pithampur Madhya Pradesh
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES
Indicate Positive, Negative or Differential, Accurate within 1%
- No Power Required
- Low Cost
- Used in Isolation/ Hospital Environments and Temporary Units (No Power Required)
Select The Series 2000 Magnehelic® Gage For a Versatile Low Differential Pressure Gage With a Wide Choice of 81 Models And 27 Options To Choose From. Using Dwyer’s Simple, Frictionless Magnehelic® Gage Movement, It Quickly Indicates Air Or Noncorrosive Gas Pressures--Either Positive, Negative (Vacuum) or Differential. The Design Resists Shock, Vibration, Over-Pressures And is Weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage Option For An Accuracy Within 1% of Full Scale, Located Below in the Product Configurator. Also Included With The –HA Option At No Extra Cost Are a Mirrored Scale Overlay and a 6 Point Calibration Certificate.
NIST CALIBRATION Available In Product Configurator.
Note: May Be Used With Hydrogen. Order a Buna-N Diaphragm. Pressures Must Be Less Than 35 PSI.
Please See Series AT-2000 for ATEX Approved.
PRODUCT APPLICATIONS
- Filter Monitoring
- Air Velocity with Dwyer Pitot Tube
- Blower Vacuum Monitoring
- Fan Pressure Indication
- Duct,Room or Building Pressures
- Clean Room Positive Pressure Indication
SPECIFICATIONS
- Service:Air And Non-Combustible, Compatible Gases (Natural Gas Option Available). Note: May Be Used With Hydrogen. Order a Buna-N Diaphragm. Pressures Must Be Less Than 35 PSI.
- Wetted Materials:Consult Factory.
- Housing:Die Cast Aluminum Case And Bezel, With Acrylic Cover, Exterior Finish is Coated Gray To Withstand 168 Hour Salt Spray Corrosion Test.
- Accuracy:±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100PA, -125PA, -10MM and ±4% (-HA ±2%) on -00, -60PA, -6MM Ranges), Throughout Range at 70°F (21.1°C).
- Pressure Limits:-20 in Hg. to 15 PSIG.† (-0.677 bar to 1.034 bar); MP Option: 35 PSIG (2.41 Bar), HP Option: 80 PSIG (5.52 Bar).
- Enclosure Rating:IP67.
- Overpressure:Relief Plug Opens At Approximately 25 PSIG (1.72 Bar), Standard Gages Only. See Overpressure Protection Note On Catalog Page.
- Temperature Limits:20 to 140°F (-6.67 to 60°C). -20°F (-28°C) With Low Temperature Option.
- Size:4" (101.6 MM) Diameter Dial Face.
- Mounting Orientation:Diaphragm In Vertical Position. Consult Factory For Other Position Orientations.
- Process Connections:1/8" Female NPT Duplicate High And Low Pressure Taps - One Pair Side And One Pair Back.
- Weight:1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
- Standard Accessories:Two 1/8" NPT Plugs For Duplicate Pressure Taps, Two 1/8" Pipe Thread To Rubber Tubing Adapters And Three Flush Mounting Adapterswith Screws. (Mounting And Snap Ring Retainer Substituted For Three Adapters In MP & HP Gage Accessories.)
- Agency Approval:Meets The Technical Requirements Of EU Directive 2011/65/EU (RoHS II).
- Note: -SP Models Not RoHS Approved.Note: For Applications With High Cycle Rate Within Gage Total Pressure Rating, Next Higher Rating Is Recommended. See Options Page.
Additional Information:
- Item Code: Dwyer-Magnehelic-Gage-In-Pithampur-Madhya-Pradesh
- Production Capacity: www.envirotechindustrialproducts.info
- Delivery Time: www.envirotechindustrialproduct.info
- Packaging Details: www.envirotechindustrialproductsdelhi.com
Yes! I am interested
Dwyer Magnehelic Gage In Beed Maharashtra
REQUEST CALLBACK
-
-
-
- +9
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Brand | H Guru |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Country of Origin | Made in India |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH |
| Process Connections | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Housing | Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 16 |
| MAGNEHELIC DIFFERENTIAL PRESSURE GAGES HSN CODE | 90262000 |
Dwyer Magnehelic Gage In Beed Maharashtra
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES
Indicate Positive, Negative or Differential, Accurate within 1%
- No Power Required
- Low Cost
- Used in Isolation/ Hospital Environments and Temporary Units (No Power Required)
Select The Series 2000 Magnehelic® Gage For a Versatile Low Differential Pressure Gage With a Wide Choice of 81 Models And 27 Options To Choose From. Using Dwyer’s Simple, Frictionless Magnehelic® Gage Movement, It Quickly Indicates Air Or Noncorrosive Gas Pressures--Either Positive, Negative (Vacuum) or Differential. The Design Resists Shock, Vibration, Over-Pressures And is Weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage Option For An Accuracy Within 1% of Full Scale, Located Below in the Product Configurator. Also Included With The –HA Option At No Extra Cost Are a Mirrored Scale Overlay and a 6 Point Calibration Certificate.
NIST CALIBRATION Available In Product Configurator.
Note: May Be Used With Hydrogen. Order a Buna-N Diaphragm. Pressures Must Be Less Than 35 PSI.
Please See Series AT-2000 for ATEX Approved.
PRODUCT APPLICATIONS
- Filter Monitoring
- Air Velocity with Dwyer Pitot Tube
- Blower Vacuum Monitoring
- Fan Pressure Indication
- Duct,Room or Building Pressures
- Clean Room Positive Pressure Indication
SPECIFICATIONS
- Service:Air And Non-Combustible, Compatible Gases (Natural Gas Option Available). Note: May Be Used With Hydrogen. Order a Buna-N Diaphragm. Pressures Must Be Less Than 35 PSI.
- Wetted Materials:Consult Factory.
- Housing:Die Cast Aluminum Case And Bezel, With Acrylic Cover, Exterior Finish is Coated Gray To Withstand 168 Hour Salt Spray Corrosion Test.
- Accuracy:±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100PA, -125PA, -10MM and ±4% (-HA ±2%) on -00, -60PA, -6MM Ranges), Throughout Range at 70°F (21.1°C).
- Pressure Limits:-20 in Hg. to 15 PSIG.† (-0.677 bar to 1.034 bar); MP Option: 35 PSIG (2.41 Bar), HP Option: 80 PSIG (5.52 Bar).
- Enclosure Rating:IP67.
- Overpressure:Relief Plug Opens At Approximately 25 PSIG (1.72 Bar), Standard Gages Only. See Overpressure Protection Note On Catalog Page.
- Temperature Limits:20 to 140°F (-6.67 to 60°C). -20°F (-28°C) With Low Temperature Option.
- Size:4" (101.6 MM) Diameter Dial Face.
- Mounting Orientation:Diaphragm In Vertical Position. Consult Factory For Other Position Orientations.
- Process Connections:1/8" Female NPT Duplicate High And Low Pressure Taps - One Pair Side And One Pair Back.
- Weight:1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
- Standard Accessories:Two 1/8" NPT Plugs For Duplicate Pressure Taps, Two 1/8" Pipe Thread To Rubber Tubing Adapters And Three Flush Mounting Adapterswith Screws. (Mounting And Snap Ring Retainer Substituted For Three Adapters In MP & HP Gage Accessories.)
- Agency Approval:Meets The Technical Requirements Of EU Directive 2011/65/EU (RoHS II).
- Note: -SP Models Not RoHS Approved.Note: For Applications With High Cycle Rate Within Gage Total Pressure Rating, Next Higher Rating Is Recommended. See Options Page.
Additional Information:
- Item Code: Dwyer-Magnehelic-Gage-In-Beed-Maharashtra
- Production Capacity: www.envirotechindustrialproductsindia.in
- Delivery Time: www.envirotechindustrialproduct.net
- Packaging Details: www.envirotechindustrialproducts.net
Yes! I am interested
Dwyer Magnehelic Gage In Warangal Telangana
REQUEST CALLBACK
-
-
-
- +9
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Brand | Dwyer USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Country of Origin | Made in India |
| MAGNEHELIC DIFFERENTIAL PRESSURE GAGES HSN CODE | 90262000 |
| Process Connections | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH |
Dwyer Magnehelic Gage In Warangal Telangana
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES
Indicate Positive, Negative or Differential, Accurate within 1%
- No Power Required
- Low Cost
- Used in Isolation/ Hospital Environments and Temporary Units (No Power Required)
Select The Series 2000 Magnehelic® Gage For a Versatile Low Differential Pressure Gage With a Wide Choice of 81 Models And 27 Options To Choose From. Using Dwyer’s Simple, Frictionless Magnehelic® Gage Movement, It Quickly Indicates Air Or Noncorrosive Gas Pressures--Either Positive, Negative (Vacuum) or Differential. The Design Resists Shock, Vibration, Over-Pressures And is Weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage Option For An Accuracy Within 1% of Full Scale, Located Below in the Product Configurator. Also Included With The –HA Option At No Extra Cost Are a Mirrored Scale Overlay and a 6 Point Calibration Certificate.
NIST CALIBRATION Available In Product Configurator.
Note: May Be Used With Hydrogen. Order a Buna-N Diaphragm. Pressures Must Be Less Than 35 PSI.
Please See Series AT-2000 for ATEX Approved.
PRODUCT APPLICATIONS
- Filter Monitoring
- Air Velocity with Dwyer Pitot Tube
- Blower Vacuum Monitoring
- Fan Pressure Indication
- Duct,Room or Building Pressures
- Clean Room Positive Pressure Indication
SPECIFICATIONS
- Service:Air And Non-Combustible, Compatible Gases (Natural Gas Option Available). Note: May Be Used With Hydrogen. Order a Buna-N Diaphragm. Pressures Must Be Less Than 35 PSI.
- Wetted Materials:Consult Factory.
- Housing:Die Cast Aluminum Case And Bezel, With Acrylic Cover, Exterior Finish is Coated Gray To Withstand 168 Hour Salt Spray Corrosion Test.
- Accuracy:±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100PA, -125PA, -10MM and ±4% (-HA ±2%) on -00, -60PA, -6MM Ranges), Throughout Range at 70°F (21.1°C).
- Pressure Limits:-20 in Hg. to 15 PSIG.† (-0.677 bar to 1.034 bar); MP Option: 35 PSIG (2.41 Bar), HP Option: 80 PSIG (5.52 Bar).
- Enclosure Rating:IP67.
- Overpressure:Relief Plug Opens At Approximately 25 PSIG (1.72 Bar), Standard Gages Only. See Overpressure Protection Note On Catalog Page.
- Temperature Limits:20 to 140°F (-6.67 to 60°C). -20°F (-28°C) With Low Temperature Option.
- Size:4" (101.6 MM) Diameter Dial Face.
- Mounting Orientation:Diaphragm In Vertical Position. Consult Factory For Other Position Orientations.
- Process Connections:1/8" Female NPT Duplicate High And Low Pressure Taps - One Pair Side And One Pair Back.
- Weight:1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
- Standard Accessories:Two 1/8" NPT Plugs For Duplicate Pressure Taps, Two 1/8" Pipe Thread To Rubber Tubing Adapters And Three Flush Mounting Adapterswith Screws. (Mounting And Snap Ring Retainer Substituted For Three Adapters In MP & HP Gage Accessories.)
- Agency Approval:Meets The Technical Requirements Of EU Directive 2011/65/EU (RoHS II).
- Note: -SP Models Not RoHS Approved.Note: For Applications With High Cycle Rate Within Gage Total Pressure Rating, Next Higher Rating Is Recommended. See Options Page.
Additional Information:
- Item Code: Dwyer-Magnehelic-Gage-In-Warangal-Telangana
- Production Capacity: www.envirotechindustrialproducts.in
- Delivery Time: www.envirotechindustrialproduct.com
- Packaging Details: www.envirotechindustrialproducts.com
Yes! I am interested
Magnehelic Differential Pressure Gauge In Petlad Industrial Area Anand Gujarat
REQUEST CALLBACK
-
-
-
- +8
Get Best Quote
Approx. Rs 5,800 / PieceGet Latest Price
Product BrochureProduct Details:| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | Dwyer USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
Magnehelic Differential Pressure Gauge In Petlad Industrial Area Anand Gujarat
Yes! I am interested
Dwyer Magnehelic Gage In Kutch Gujarat India
REQUEST CALLBACK
-
-
-
- +9
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | Dwyer USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
Yes! I am interested
Dwyer Magnehelic Gage In Halol Gujarat
REQUEST CALLBACK
-
-
-
- +8
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | Dwyer USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
Yes! I am interested
Dwyer Magnehelic Gage In Amalapuram Andhra Pradesh
REQUEST CALLBACK
-
-
-
- +8
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | Dwyer USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
Yes! I am interested
Dwyer Magnehelic Gage In Gwalior Madhya Pradesh
REQUEST CALLBACK
-
-
-
- +8
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | Dwyer. USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
Yes! I am interested
Dwyer Magnehelic Gage In Nanded Maharashtra
REQUEST CALLBACK
-
-
-
- +7
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Dial Type | Dry |
| Brand | Dwyer USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
Yes! I am interested
Dwyer Magnehelic Gauge In Guntur Andhra Pradesh
REQUEST CALLBACK
-
-
-
- +8
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | Dwyer USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
Yes! I am interested
Dwyer Magnehelic Gage In Pollachi Tamil Nadu
REQUEST CALLBACK
-
-
-
- +8
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | Dwyer USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
Yes! I am interested
Dwyer Magnehelic Gage In Jhansi Uttar Pradesh
REQUEST CALLBACK
-
-
-
- +8
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | Dwyer USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
Yes! I am interested
Dwyer Magnehelic Gauges
REQUEST CALLBACK
-
-
-
- +7
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | Dwyer USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
Yes! I am interested
Dwyer Magnehelic Gage
REQUEST CALLBACK
-
-
-
- +7
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | Dwyer USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
Yes! I am interested
Dwyer Magnehelic Gage In Madurai Tamil Nadu
REQUEST CALLBACK
-
-
-
- +8
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | Dwyer USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
Yes! I am interested
Dwyer Magnehelic Gage IN Dadri Road Greater Noida
REQUEST CALLBACK
-
-
-
- +9
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | Dwyer USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
Yes! I am interested
Dwyer Magnehelic Gage In Hathras Uttar Pradesh
REQUEST CALLBACK
-
-
-
- +8
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | Dwyer USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
Yes! I am interested
Dwyer Magnehelic Gage In Balasore Odisha
REQUEST CALLBACK
-
-
-
- +8
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | Dwyer USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
Yes! I am interested
Dwyer Magnehelic Gage In Raigarh Chhattisgarh
REQUEST CALLBACK
-
-
-
- +8
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | Dwyer USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
Yes! I am interested
Dwyer Magnehelic Gage In Ernakulam Kerala
REQUEST CALLBACK
-
-
-
- +6
Get Best Quote
Approx. Rs 5,800 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Dial Size | 4 inch / 100 mm |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Pressure Type | MM WC/ CM / PAC / KPA / INCH |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| MAGNEHELIC DIFFERENTIAL PRESSURE GAGES HSN CODE | 90262000 |
Dwyer Magnehelic Gage In Ernakulam Kerala
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES
Indicate Positive, Negative or Differential, Accurate within 1%
- No Power Required
- Low Cost
- Used in Isolation/ Hospital Environments and Temporary Units (No Power Required)
Select The Series 2000 Magnehelic® Gage For a Versatile Low Differential Pressure Gage With a Wide Choice of 81 Models And 27 Options To Choose From. Using Dwyer’s Simple, Frictionless Magnehelic® Gage Movement, It Quickly Indicates Air Or Noncorrosive Gas Pressures--Either Positive, Negative (Vacuum) or Differential. The Design Resists Shock, Vibration, Over-Pressures And is Weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage Option For An Accuracy Within 1% of Full Scale, Located Below in the Product Configurator. Also Included With The –HA Option At No Extra Cost Are a Mirrored Scale Overlay and a 6 Point Calibration Certificate.
NIST CALIBRATION Available In Product Configurator.
Note: May Be Used With Hydrogen. Order a Buna-N Diaphragm. Pressures Must Be Less Than 35 PSI.
Please See Series AT-2000 for ATEX Approved.
PRODUCT APPLICATIONS
- Filter Monitoring
- Air Velocity with Dwyer Pitot Tube
- Blower Vacuum Monitoring
- Fan Pressure Indication
- Duct,Room or Building Pressures
- Clean Room Positive Pressure Indication
SPECIFICATIONS
- Service:Air And Non-Combustible, Compatible Gases (Natural Gas Option Available). Note: May Be Used With Hydrogen. Order a Buna-N Diaphragm. Pressures Must Be Less Than 35 PSI.
- Wetted Materials:Consult Factory.
- Housing:Die Cast Aluminum Case And Bezel, With Acrylic Cover, Exterior Finish is Coated Gray To Withstand 168 Hour Salt Spray Corrosion Test.
- Accuracy:±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100PA, -125PA, -10MM and ±4% (-HA ±2%) on -00, -60PA, -6MM Ranges), Throughout Range at 70°F (21.1°C).
- Pressure Limits:-20 in Hg. to 15 PSIG.† (-0.677 bar to 1.034 bar); MP Option: 35 PSIG (2.41 Bar), HP Option: 80 PSIG (5.52 Bar).
- Enclosure Rating:IP67.
- Overpressure:Relief Plug Opens At Approximately 25 PSIG (1.72 Bar), Standard Gages Only. See Overpressure Protection Note On Catalog Page.
- Temperature Limits:20 to 140°F (-6.67 to 60°C). -20°F (-28°C) With Low Temperature Option.
- Size:4" (101.6 MM) Diameter Dial Face.
- Mounting Orientation:Diaphragm In Vertical Position. Consult Factory For Other Position Orientations.
- Process Connections:1/8" Female NPT Duplicate High And Low Pressure Taps - One Pair Side And One Pair Back.
- Weight:1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
- Standard Accessories:Two 1/8" NPT Plugs For Duplicate Pressure Taps, Two 1/8" Pipe Thread To Rubber Tubing Adapters And Three Flush Mounting Adapterswith Screws. (Mounting And Snap Ring Retainer Substituted For Three Adapters In MP & HP Gage Accessories.)
- Agency Approval:Meets The Technical Requirements Of EU Directive 2011/65/EU (RoHS II).
- Note: -SP Models Not RoHS Approved.Note: For Applications With High Cycle Rate Within Gage Total Pressure Rating, Next Higher Rating Is Recommended. See Options Page.
Additional Information:
- Item Code: Dwyer-Magnehelic-Gage-In-Ernakulam-Kerala
- Production Capacity: www.envirotechdelhi.co.in
- Delivery Time: www.envirotechindia.net
- Packaging Details: www.envirotechdelhi.info
Yes! I am interested
Looking for DWYER INSTRUMENTS AUTHORIZED DISTRIBUTOR GANDHI NAGAR DELHI ?
X
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- Series 2000 DWYER MAGNEHELIC Differential Pressure Gauges Wholesalers Gurgaon Ballabgarh Bahadurgarh
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
Explore More Products
Contact via E-mail
Contact via SMS
RP SHARMA (Proprietor)
Enviro Tech Industrial Products
Enviro Tech Industrial Products
X-852, Gali No.11,Gandhi, Nagar
New Delhi - 110031, Delhi, India
New Delhi - 110031, Delhi, India
Call Us: Call Response Rate: 80%
© Enviro Tech Industrial Products. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited