Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Differential Range | 0–1 kPa |
| Dial Size | 100 mm |
| Output Signal | No Output |
| Process Connection | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Mounting Type | Surface |
| Media Type | Air |
| Enclosure Rating | IP65 |
| Application | Clean Room |
| Brand | Dwyer |
| Marketing BY Dwyer Magnehelic Gauge Differential Pressure Gauges | ETIP - ENVIRO TECH INDUSTRIAL PRODUCTS |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI / MBAR |
| DWYER OMEGA MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE HSN CODE | 90262000 |
| Outer Size | 4" (101.6 MM) Diameter Dial Face. |
| Accuracy | 2% (-HA model 1) of FS (3% (-HA 1.5%) on -0, -100PA, -125PA, -10MM and 4% (-HA 2%) on -00, -60PA, -6 |
| Main Export Market(s) | Western Europe, Africa, North America, Australia, Middle East, Central America, South America, Asia |
| Main Domestic Market | Himachal Pradesh, Jammu and Kashmir, Madhya Pradesh, Maharashtra, Nagaland, Rajasthan, Sikkim |
Select the Series 2000 Magnehelic® Gage for a versatile low Differential Pressure Gage With a Wide Choice of 81 Models and 27 Options To Choose From. Using Dwyer’s Simple,frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures--either positive,negative vacuum or differential.The design resists shock,vibration,over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1.5 kPa,minor divisions .05. |
| 2000-10KPA | MAGNEHELIC Differential Pressure Gage,Range 0-10 kPa,minor divisions .20. |
| 2000-15KPA | MAGNEHELIC Differential Pressure Gage,Range 0-15 kPa,minor divisions .50. |
| 2000-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1 kPa,minor divisions .02. |
| 2000-20KPA | MAGNEHELIC Differential Pressure Gage,Range 0-20 kPa,minor divisions .50. |
| 2000-25KPA | MAGNEHELIC Differential Pressure Gage,Range 0-25 kPa,minor divisions .50. |
| 2000-2KPA | MAGNEHELIC Differential Pressure Gage,Range 0-2 kPa,minor divisions .05. |
| 2000-30KPA | MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa,minor divisions 1.0. |
| 2000-3KPA | MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa,minor divisions .10. |
| 2000-4KPA | MAGNEHELIC Differential Pressure Gage,Range 0-4 kPa,minor divisions .10. |
| 2000-5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-5 kPa,minor divisions .10. |
| 2000-8KPA | MAGNEHELIC Differential Pressure Gage,Range 0-8 kPa,minor divisions .20. |
| 2300-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Differential Range | 0–1 kPa |
| Dial Size | 100 mm |
| Output Signal | No Output |
| Process Connection | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Mounting Type | Panel |
| Media Type | Air |
| Enclosure Rating | IP65 |
| Application | HVAC |
| Brand | Dwyer |
| Main Domestic Market | Manipur, Andhra Pradesh, Bihar, Chandigarh, Daman and Diu, Goa, Jharkhand, Odisha, Punjab, Assam |
| Main Export Market(s) | Western Europe, Africa, North America, Australia, Middle East, Central America, South America, Asia |
| Accuracy | 2% (-HA model 1) of FS (3% (-HA 1.5%) on -0, -100PA, -125PA, -10MM and 4% (-HA 2%) on -00, -60PA, -6 |
| Outer Size | 4" (101.6 MM) Diameter Dial Face. |
| DWYER OMEGA MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE HSN CODE | 90262000 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI / MBAR |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Marketing BY Dwyer Magnehelic Gauge Differential Pressure Gauges | ETIP - ENVIRO TECH INDUSTRIAL PRODUCTS |
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES Indicate Positive,Negative or Differential,Accurate within 1%
Select the Series 2000 Magnehelic® Gage for a versatile low Differential Pressure Gage With a Wide Choice of 81 Models and 27 Options To Choose From. Using Dwyer’s Simple,frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures--either positive,negative vacuum or differential.The design resists shock,vibration,over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1.5 kPa,minor divisions .05. |
| 2000-10KPA | MAGNEHELIC Differential Pressure Gage,Range 0-10 kPa,minor divisions .20. |
| 2000-15KPA | MAGNEHELIC Differential Pressure Gage,Range 0-15 kPa,minor divisions .50. |
| 2000-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1 kPa,minor divisions .02. |
| 2000-20KPA | MAGNEHELIC Differential Pressure Gage,Range 0-20 kPa,minor divisions .50. |
| 2000-25KPA | MAGNEHELIC Differential Pressure Gage,Range 0-25 kPa,minor divisions .50. |
| 2000-2KPA | MAGNEHELIC Differential Pressure Gage,Range 0-2 kPa,minor divisions .05. |
| 2000-30KPA | MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa,minor divisions 1.0. |
| 2000-3KPA | MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa,minor divisions .10. |
| 2000-4KPA | MAGNEHELIC Differential Pressure Gage,Range 0-4 kPa,minor divisions .10. |
| 2000-5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-5 kPa,minor divisions .10. |
| 2000-8KPA | MAGNEHELIC Differential Pressure Gage,Range 0-8 kPa,minor divisions .20. |
| 2300-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Differential Range | 0–125 Pa |
| Dial Size | 100 mm |
| Output Signal | No Output |
| Process Connection | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Mounting Type | Panel |
| Media Type | Air |
| Enclosure Rating | IP65 |
| Application | Filter |
| Application. | POWER PLANT,CEMENT PLANT,STEEL PLANT,FERTILIZER,TEXTILE,Pharmaceutical,POWER PLANT,CEMENT PLANT,STEE |
| Marketing BY Dwyer Magnehelic Gauge Differential Pressure Gauges | ETIP - ENVIRO TECH INDUSTRIAL PRODUCTS |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI / MBAR |
| DWYER OMEGA MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE HSN CODE | 90262000 |
| Outer Size | 4" (101.6 MM) Diameter Dial Face. |
| Accuracy | 2% (-HA model 1) of FS (3% (-HA 1.5%) on -0, -100PA, -125PA, -10MM and 4% (-HA 2%) on -00, -60PA, -6 |
| Main Export Market(s) | Western Europe, Africa, North America, Australia, Middle East, Central America, South America, Asia |
| Main Domestic Market | Himachal Pradesh, Jammu and Kashmir, Madhya Pradesh, Maharashtra, Nagaland, Rajasthan, Sikkim |
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES Indicate Positive,Negative or Differential,Accurate within 1%
Select the Series 2000 Magnehelic® Gage for a versatile low Differential Pressure Gage With a Wide Choice of 81 Models and 27 Options To Choose From. Using Dwyer’s Simple,frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures--either positive,negative vacuum or differential.The design resists shock,vibration,over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1.5 kPa,minor divisions .05. |
| 2000-10KPA | MAGNEHELIC Differential Pressure Gage,Range 0-10 kPa,minor divisions .20. |
| 2000-15KPA | MAGNEHELIC Differential Pressure Gage,Range 0-15 kPa,minor divisions .50. |
| 2000-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1 kPa,minor divisions .02. |
| 2000-20KPA | MAGNEHELIC Differential Pressure Gage,Range 0-20 kPa,minor divisions .50. |
| 2000-25KPA | MAGNEHELIC Differential Pressure Gage,Range 0-25 kPa,minor divisions .50. |
| 2000-2KPA | MAGNEHELIC Differential Pressure Gage,Range 0-2 kPa,minor divisions .05. |
| 2000-30KPA | MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa,minor divisions 1.0. |
| 2000-3KPA | MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa,minor divisions .10. |
| 2000-4KPA | MAGNEHELIC Differential Pressure Gage,Range 0-4 kPa,minor divisions .10. |
| 2000-5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-5 kPa,minor divisions .10. |
| 2000-8KPA | MAGNEHELIC Differential Pressure Gage,Range 0-8 kPa,minor divisions .20. |
| 2300-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Differential Range | 0–500 Pa |
| Type | Magnehelic |
| Dial Size | 100 mm |
| Process Connection | 1/8 inch NPT |
| Output Signal | No Output |
| Media Type | Air |
| Mounting Type | Surface |
| Enclosure Rating | IP65 |
| Application | Clean Room |
| Brand | Dwyer |
| Connection Size | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Connection Type | NPT |
| Weight | 550 G |
| Wetted Parts | Die Cast Aluminum Case And Bezel, With Acrylic Cover, Exterior Finish Is Coated Gray To Withstand 16 |
| Window Material | Acrylic |
| Pointer Material | Die Cast Aluminum Case And Bezel, With Acrylic Cover, Exterior Finish Is Coated Gray To Withstand 16 |
| Model Name/Number | Series 2000 DWYER OMEGA MAGNEHELIC Differential Pressure Gauges |
| Material of casing | Die Cast Aluminum Case And Bezel, With Acrylic Cover, Exterior Finish Is Coated Gray To Withstand 16 |
| Mounting | Back |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI / MBAR |
| Rated Pressure | 20 inHg~30 inHg (-68~103KPa) |
| Process Connections | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| BRAND NAME | DWYER OMEGA |
| Accuracy | +-2% of full span at 70 (21 (+-3% on -0, and +-4% on -00) |
| Series | 2000 DWYER OMEGA MAGNEHELIC Differential Pressure Gauges |
| DWYER OMEGA DIFFERENTIAL PRESSURE GAUGE HSN CODE | 90262000 |
| Housing | Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 16 |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Overpressure | Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa) |
| Range | 20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.) |
| Ambient Temperature | -21 ~140 -6 ~60 |
| PRODUCT APPLICATIONS | Filter Monitoring,Air Velocity With Pitot Tube |
| Models | There Are More Than 81 Models To Suit Your Needs Precisely. |
| Marketing BY DWYER OMEGA Differential Pressure Gauges | WELCOME TO ENVIRO TECH INDUSTRIAL PRODUCTS (Since 1995) |
MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE NEAR Silver Industrial Estate Daman
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES Indicate Positive,Negative or Differential, Accurate within 1%
Select the Series 2000 Magnehelic® Gage for a versatile low Differential Pressure Gage With a Wide Choice of 81 Models and 27 Options To Choose From.Using Dwyer’s Simple, frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures--either positive, negative vacuum or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67.Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale,located below in the Product Configurator.Also included with the–HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents:Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1.5 kPa, minor divisions .05. |
| 2000-10KPA | MAGNEHELIC Differential Pressure Gage,Range 0-10 kPa, minor divisions .20. |
| 2000-15KPA | MAGNEHELIC Differential Pressure Gage,Range 0-15 kPa, minor divisions .50. |
| 2000-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1 kPa, minor divisions .02. |
| 2000-20KPA | MAGNEHELIC Differential Pressure Gage,Range 0-20 kPa, minor divisions .50. |
| 2000-25KPA | MAGNEHELIC Differential Pressure Gage,Range 0-25 kPa, minor divisions .50. |
| 2000-2KPA | MAGNEHELIC Differential Pressure Gage,Range 0-2 kPa, minor divisions .05. |
| 2000-30KPA | MAGNEHELIC Differential Pressure Gage,Range 0-30 kPa, minor divisions 1.0. |
| 2000-3KPA | MAGNEHELIC Differential Pressure Gage,Range 0-3 kPa, minor divisions .10. |
| 2000-4KPA | MAGNEHELIC Differential Pressure Gage,Range 0-4 kPa, minor divisions .10. |
| 2000-5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-5 kPa, minor divisions .10. |
| 2000-8KPA | MAGNEHELIC Differential Pressure Gage,Range 0-8 kPa, minor divisions .20. |
| 2300-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0.5-0-0.5 kPa,minor divisions .02. |
| 2300-3KPA | MAGNEHELIC Differential Pressure Gage,Range 1.5-0-1.5 kPa,minor divisions .10. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Differential Range | 0–60 Pa |
| Dial Size | 100 mm |
| Output Signal | No Output |
| Process Connection | 1/8 inch NPT |
| Mounting Type | Panel |
| Media Type | Air |
| Enclosure Rating | IP65 |
| Application | HVAC |
| Brand | Dwyer |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Differential Range | 0–125 Pa |
| Dial Size | 100 mm |
| Output Signal | No Output |
| Process Connection | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Mounting Type | Panel |
| Media Type | Air |
| Enclosure Rating | IP65 |
| Application | HVAC |
| Brand | Dwyer |
| Main Domestic Market | Himachal Pradesh, Jammu and Kashmir, Madhya Pradesh, Maharashtra, Nagaland, Rajasthan, Sikkim |
| Main Export Market(s) | Western Europe, Africa, North America, Australia, Middle East, Central America, South America, Asia |
| Accuracy | 2% (-HA model 1) of FS (3% (-HA 1.5%) on -0, -100PA, -125PA, -10MM and 4% (-HA 2%) on -00, -60PA, -6 |
| Outer Size | 4" (101.6 MM) Diameter Dial Face. |
| DWYER OMEGA MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE HSN CODE | 90262000 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI / MBAR |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Marketing BY Dwyer Magnehelic Gauge Differential Pressure Gauges | ETIP - ENVIRO TECH INDUSTRIAL PRODUCTS |
| Application. | POWER PLANT,CEMENT PLANT,STEEL PLANT,FERTILIZER,TEXTILE,Pharmaceutical,POWER PLANT,CEMENT PLANT,STE |
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES Indicate Positive,Negative or Differential,Accurate within 1%
Select the Series 2000 Magnehelic® Gage for a versatile low Differential Pressure Gage With a Wide Choice of 81 Models and 27 Options To Choose From. Using Dwyer’s Simple,frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures--either positive,negative vacuum or differential.The design resists shock,vibration,over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1.5 kPa,minor divisions .05. |
| 2000-10KPA | MAGNEHELIC Differential Pressure Gage,Range 0-10 kPa,minor divisions .20. |
| 2000-15KPA | MAGNEHELIC Differential Pressure Gage,Range 0-15 kPa,minor divisions .50. |
| 2000-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1 kPa,minor divisions .02. |
| 2000-20KPA | MAGNEHELIC Differential Pressure Gage,Range 0-20 kPa,minor divisions .50. |
| 2000-25KPA | MAGNEHELIC Differential Pressure Gage,Range 0-25 kPa,minor divisions .50. |
| 2000-2KPA | MAGNEHELIC Differential Pressure Gage,Range 0-2 kPa,minor divisions .05. |
| 2000-30KPA | MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa,minor divisions 1.0. |
| 2000-3KPA | MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa,minor divisions .10. |
| 2000-4KPA | MAGNEHELIC Differential Pressure Gage,Range 0-4 kPa,minor divisions .10. |
| 2000-5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-5 kPa,minor divisions .10. |
| 2000-8KPA | MAGNEHELIC Differential Pressure Gage,Range 0-8 kPa,minor divisions .20. |
| 2300-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Differential Range | 0–500 Pa |
| Type | Magnehelic |
| Dial Size | 100 mm |
| Process Connection | 1/8 inch NPT |
| Output Signal | No Output |
| Media Type | Air |
| Mounting Type | Wall |
| Enclosure Rating | IP65 |
| Application | Clean Room |
| Brand | Dwyer |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Dial Size | 4 inch / 100 mm |
| Brand | DWYER OMEGA |
| Use | Dairy Pump |
| Display Type | Analog |
| Country of Origin | Made in India |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Housing | Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 16 |
| Overpressure | Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa) |
| Rated Pressure | -20 inHg~30 inHg (-68~103KPa) |
| Ambient Temperature | -21 ~140 -6 ~60 |
| Pressure Limits | -20 in Hg to 15 psig (-0.677 bar to 1.034 bar) |
| Process Connections | 1/8" female NPT duplicate high and low pressure taps |
| DWYER OMEGA Magnehelic Differential Pressure Gauge HSN CODE | 90262000 |
| Size | 4" (101.6 mm) diameter dial face |
| Weight | 550 g |
| Window Material | Acrylic |
| Pointer Material | Aluminium Black |
| Mounting | Back |
| Dial Type | Dry |
| Connection Size | 1/8" female NPT duplicate high and low pressure taps |
| Connection Type | NPT |
| Usage/Application | Duct,Room or Building Pressures |
DWYER By Model Number Popularity
|
Model |
Description |
|
2000-0 |
DPG,Range 0-0.50″ w.c., minor divisions .01, calibrated for vertical scale position. |
|
2000-00 |
DPG,Range 0-0.25″ w.c.,minor divisions .005, calibrated for vertical scale position. |
|
2001 |
DPG,Range 0-1.0″ w.c.,minor divisions .02. |
|
2002 |
DPG,Range 0-2.0″ w.c.,minor divisions .05. |
|
2003 |
DPG,Range 0-3.0″ w.c.,minor divisions .10. |
|
2004 |
DPG,Range 0-4.0″ w.c.,minor divisions .10. |
|
2005 |
DPG,Range 0-5.0″ w.c.,minor divisions .10. |
|
2006 |
DPG,Range 0-6.0″ w.c., minor divisions .20. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI / MBAR |
| DWYER OMEGA MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE HSN CODE | 90262000 |
| Outer Size | 4" (101.6 MM) Diameter Dial Face. |
| Accuracy | 2% (-HA model 1) of FS (3% (-HA 1.5%) on -0, -100PA, -125PA, -10MM and 4% (-HA 2%) on -00, -60PA, -6 |
| Main Export Market(s) | Western Europe, Africa, North America, Australia, Middle East, Central America, South America, Asia |
| Main Domestic Market | All India, South India, Central India, West India, North India, East India, Gujarat, Karnataka |
| Brand | Dwyer |
| Application | HVAC |
| Enclosure Rating | IP65 |
| Media Type | Air |
| Mounting Type | Panel |
| Process Connection | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Output Signal | No Output |
| Dial Size | 100 mm |
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES Indicate Positive,Negative or Differential,Accurate within 1%
Select the Series 2000 Magnehelic® Gage for a versatile low Differential Pressure Gage With a Wide Choice of 81 Models and 27 Options To Choose From. Using Dwyer’s Simple,frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures--either positive,negative vacuum or differential.The design resists shock,vibration,over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1.5 kPa,minor divisions .05. |
| 2000-10KPA | MAGNEHELIC Differential Pressure Gage,Range 0-10 kPa,minor divisions .20. |
| 2000-15KPA | MAGNEHELIC Differential Pressure Gage,Range 0-15 kPa,minor divisions .50. |
| 2000-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1 kPa,minor divisions .02. |
| 2000-20KPA | MAGNEHELIC Differential Pressure Gage,Range 0-20 kPa,minor divisions .50. |
| 2000-25KPA | MAGNEHELIC Differential Pressure Gage,Range 0-25 kPa,minor divisions .50. |
| 2000-2KPA | MAGNEHELIC Differential Pressure Gage,Range 0-2 kPa,minor divisions .05. |
| 2000-30KPA | MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa,minor divisions 1.0. |
| 2000-3KPA | MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa,minor divisions .10. |
| 2000-4KPA | MAGNEHELIC Differential Pressure Gage,Range 0-4 kPa,minor divisions .10. |
| 2000-5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-5 kPa,minor divisions .10. |
| 2000-8KPA | MAGNEHELIC Differential Pressure Gage,Range 0-8 kPa,minor divisions .20. |
| 2300-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Dial Size | 100 mm |
| Output Signal | No Output |
| Process Connection | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Mounting Type | Panel |
| Media Type | Air |
| Enclosure Rating | IP65 |
| Application | HVAC |
| Brand | Dwyer |
| Main Domestic Market | Himachal Pradesh, Jammu and Kashmir, Madhya Pradesh, Maharashtra, Nagaland, Rajasthan, Sikkim |
| Main Export Market(s) | Western Europe, Africa, North America, Australia, Middle East, Central America, South America, Asia |
| Accuracy | 2% (-HA model 1) of FS (3% (-HA 1.5%) on -0, -100PA, -125PA, -10MM and 4% (-HA 2%) on -00, -60PA, -6 |
| Outer Size | 4" (101.6 MM) Diameter Dial Face. |
| DWYER OMEGA MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE HSN CODE | 90262000 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI / MBAR |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Marketing BY Dwyer Magnehelic Gauge Differential Pressure Gauges | ETIP - ENVIRO TECH INDUSTRIAL PRODUCTS |
Select the Series 2000 Magnehelic® Gage for a versatile low Differential Pressure Gage With a Wide Choice of 81 Models and 27 Options To Choose From. Using Dwyer’s Simple,frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures--either positive,negative vacuum or differential.The design resists shock,vibration,over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1.5 kPa,minor divisions .05. |
| 2000-10KPA | MAGNEHELIC Differential Pressure Gage,Range 0-10 kPa,minor divisions .20. |
| 2000-15KPA | MAGNEHELIC Differential Pressure Gage,Range 0-15 kPa,minor divisions .50. |
| 2000-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1 kPa,minor divisions .02. |
| 2000-20KPA | MAGNEHELIC Differential Pressure Gage,Range 0-20 kPa,minor divisions .50. |
| 2000-25KPA | MAGNEHELIC Differential Pressure Gage,Range 0-25 kPa,minor divisions .50. |
| 2000-2KPA | MAGNEHELIC Differential Pressure Gage,Range 0-2 kPa,minor divisions .05. |
| 2000-30KPA | MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa,minor divisions 1.0. |
| 2000-3KPA | MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa,minor divisions .10. |
| 2000-4KPA | MAGNEHELIC Differential Pressure Gage,Range 0-4 kPa,minor divisions .10. |
| 2000-5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-5 kPa,minor divisions .10. |
| 2000-8KPA | MAGNEHELIC Differential Pressure Gage,Range 0-8 kPa,minor divisions .20. |
| 2300-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Marketing BY Dwyer Magnehelic Gauge Differential Pressure Gauges | ETIP - ENVIRO TECH INDUSTRIAL PRODUCTS |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI / MBAR |
| DWYER OMEGA MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE HSN CODE | 90262000 |
| Outer Size | 4" (101.6 MM) Diameter Dial Face. |
| Accuracy | 2% (-HA model 1) of FS (3% (-HA 1.5%) on -0, -100PA, -125PA, -10MM and 4% (-HA 2%) on -00, -60PA, -6 |
| Main Export Market(s) | Western Europe, Africa, North America, Australia, Middle East, Central America, South America, Asia |
| Main Domestic Market | Himachal Pradesh, Jammu and Kashmir, Madhya Pradesh, Maharashtra, Nagaland, Rajasthan, Sikkim |
| Brand | Dwyer |
| Application | HVAC |
| Enclosure Rating | IP65 |
| Media Type | Air |
| Mounting Type | Panel |
| Process Connection | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Output Signal | No Output |
| Dial Size | 100 mm |
Select the Series 2000 Magnehelic® Gage for a versatile low Differential Pressure Gage With a Wide Choice of 81 Models and 27 Options To Choose From. Using Dwyer’s Simple,frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures--either positive,negative vacuum or differential.The design resists shock,vibration,over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1.5 kPa,minor divisions .05. |
| 2000-10KPA | MAGNEHELIC Differential Pressure Gage,Range 0-10 kPa,minor divisions .20. |
| 2000-15KPA | MAGNEHELIC Differential Pressure Gage,Range 0-15 kPa,minor divisions .50. |
| 2000-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1 kPa,minor divisions .02. |
| 2000-20KPA | MAGNEHELIC Differential Pressure Gage,Range 0-20 kPa,minor divisions .50. |
| 2000-25KPA | MAGNEHELIC Differential Pressure Gage,Range 0-25 kPa,minor divisions .50. |
| 2000-2KPA | MAGNEHELIC Differential Pressure Gage,Range 0-2 kPa,minor divisions .05. |
| 2000-30KPA | MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa,minor divisions 1.0. |
| 2000-3KPA | MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa,minor divisions .10. |
| 2000-4KPA | MAGNEHELIC Differential Pressure Gage,Range 0-4 kPa,minor divisions .10. |
| 2000-5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-5 kPa,minor divisions .10. |
| 2000-8KPA | MAGNEHELIC Differential Pressure Gage,Range 0-8 kPa,minor divisions .20. |
| 2300-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Main Domestic Market | Himachal Pradesh, Jammu and Kashmir, Madhya Pradesh, Maharashtra, Nagaland, Rajasthan, Sikkim |
| Main Export Market(s) | Western Europe, Africa, North America, Australia, Middle East, Central America, South America, Asia |
| Accuracy | 2% (-HA model 1) of FS (3% (-HA 1.5%) on -0, -100PA, -125PA, -10MM and 4% (-HA 2%) on -00, -60PA, -6 |
| Outer Size | 4" (101.6 MM) Diameter Dial Face. |
| DWYER OMEGA MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE HSN CODE | 90262000 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI / MBAR |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Marketing BY Dwyer Magnehelic Gauge Differential Pressure Gauges | ETIP - ENVIRO TECH INDUSTRIAL PRODUCTS |
| Brand | Dwyer |
| Application | POWER PLANT,CEMENT PLANT,STEEL PLANT,FERTILIZER,TEXTILE,Pharmaceutical,POWER PLANT,CEMENT PLANT,STEE |
| Enclosure Rating | IP65 |
| Media Type | Air |
| Mounting Type | Surface |
| Process Connection | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Output Signal | No Output |
| Dial Size | 100 mm |
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES Indicate Positive,Negative or Differential,Accurate within 1%
Select the Series 2000 Magnehelic® Gage for a versatile low Differential Pressure Gage With a Wide Choice of 81 Models and 27 Options To Choose From. Using Dwyer’s Simple,frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures--either positive,negative vacuum or differential.The design resists shock,vibration,over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1.5 kPa,minor divisions .05. |
| 2000-10KPA | MAGNEHELIC Differential Pressure Gage,Range 0-10 kPa,minor divisions .20. |
| 2000-15KPA | MAGNEHELIC Differential Pressure Gage,Range 0-15 kPa,minor divisions .50. |
| 2000-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1 kPa,minor divisions .02. |
| 2000-20KPA | MAGNEHELIC Differential Pressure Gage,Range 0-20 kPa,minor divisions .50. |
| 2000-25KPA | MAGNEHELIC Differential Pressure Gage,Range 0-25 kPa,minor divisions .50. |
| 2000-2KPA | MAGNEHELIC Differential Pressure Gage,Range 0-2 kPa,minor divisions .05. |
| 2000-30KPA | MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa,minor divisions 1.0. |
| 2000-3KPA | MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa,minor divisions .10. |
| 2000-4KPA | MAGNEHELIC Differential Pressure Gage,Range 0-4 kPa,minor divisions .10. |
| 2000-5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-5 kPa,minor divisions .10. |
| 2000-8KPA | MAGNEHELIC Differential Pressure Gage,Range 0-8 kPa,minor divisions .20. |
| 2300-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Dial Size | 100 mm |
| Output Signal | No Output |
| Process Connection | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Mounting Type | Surface |
| Media Type | Air |
| Enclosure Rating | IP65 |
| Application | POWER PLANT,CEMENT PLANT,STEEL PLANT,FERTILIZER,TEXTILE,Pharmaceutical,POWER PLANT,CEMENT PLANT,STEE |
| Brand | Dwyer |
| Marketing BY Dwyer Magnehelic Gauge Differential Pressure Gauges | ETIP - ENVIRO TECH INDUSTRIAL PRODUCTS |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI / MBAR |
| DWYER OMEGA MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE HSN CODE | 90262000 |
| Outer Size | 4" (101.6 MM) Diameter Dial Face. |
| Accuracy | 2% (-HA model 1) of FS (3% (-HA 1.5%) on -0, -100PA, -125PA, -10MM and 4% (-HA 2%) on -00, -60PA, -6 |
| Main Export Market(s) | Western Europe, Africa, North America, Australia, Middle East, Central America, South America, Asia |
| Main Domestic Market | Dadra and Nagar Haveli, Andaman and Nicobar Islands, Arunachal Pradesh, Chhattisgarh, Haryana |
Select the Series 2000 Magnehelic® Gage for a versatile low Differential Pressure Gage With a Wide Choice of 81 Models and 27 Options To Choose From. Using Dwyer’s Simple,frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures--either positive,negative vacuum or differential.The design resists shock,vibration,over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1.5 kPa,minor divisions .05. |
| 2000-10KPA | MAGNEHELIC Differential Pressure Gage,Range 0-10 kPa,minor divisions .20. |
| 2000-15KPA | MAGNEHELIC Differential Pressure Gage,Range 0-15 kPa,minor divisions .50. |
| 2000-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1 kPa,minor divisions .02. |
| 2000-20KPA | MAGNEHELIC Differential Pressure Gage,Range 0-20 kPa,minor divisions .50. |
| 2000-25KPA | MAGNEHELIC Differential Pressure Gage,Range 0-25 kPa,minor divisions .50. |
| 2000-2KPA | MAGNEHELIC Differential Pressure Gage,Range 0-2 kPa,minor divisions .05. |
| 2000-30KPA | MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa,minor divisions 1.0. |
| 2000-3KPA | MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa,minor divisions .10. |
| 2000-4KPA | MAGNEHELIC Differential Pressure Gage,Range 0-4 kPa,minor divisions .10. |
| 2000-5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-5 kPa,minor divisions .10. |
| 2000-8KPA | MAGNEHELIC Differential Pressure Gage,Range 0-8 kPa,minor divisions .20. |
| 2300-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| DWYER OMEGA MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE HSN CODE | 90262000 |
| SERIES | 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES |
| Dial Size | 100 mm |
| Output Signal | No Output |
| Process Connection | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Mounting Type | Panel |
| Media Type | Air |
| Enclosure Rating | IP65 |
| Application | POWER PLANT,CEMENT PLANT,STEEL PLANT,FERTILIZER,TEXTILE,Pharmaceutical,POWER PLANT,CEMENT PLANT,STEE |
| Main Domestic Market | Himachal Pradesh, Jammu and Kashmir, Madhya Pradesh, Maharashtra, Nagaland, Rajasthan, Sikkim |
| Main Export Market(s) | Western Europe, Africa, North America, Australia, Middle East, Central America, South America, Asia |
| Accuracy | 2% (-HA model 1) of FS (3% (-HA 1.5%) on -0, -100PA, -125PA, -10MM and 4% (-HA 2%) on -00, -60PA, -6 |
| Outer Size | 4" (101.6 MM) Diameter Dial Face. |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI / MBAR |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Marketing BY Dwyer Magnehelic Gauge Differential Pressure Gauges | ETIP - ENVIRO TECH INDUSTRIAL PRODUCTS |
| Brand | Dwyer |
| Mounting Type | Surface |
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES Indicate Positive,Negative or Differential,Accurate within 1%
Select the Series 2000 Magnehelic® Gage for a versatile low Differential Pressure Gage With a Wide Choice of 81 Models and 27 Options To Choose From. Using Dwyer’s Simple,frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures--either positive,negative vacuum or differential.The design resists shock,vibration,over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1.5 kPa,minor divisions .05. |
| 2000-10KPA | MAGNEHELIC Differential Pressure Gage,Range 0-10 kPa,minor divisions .20. |
| 2000-15KPA | MAGNEHELIC Differential Pressure Gage,Range 0-15 kPa,minor divisions .50. |
| 2000-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1 kPa,minor divisions .02. |
| 2000-20KPA | MAGNEHELIC Differential Pressure Gage,Range 0-20 kPa,minor divisions .50. |
| 2000-25KPA | MAGNEHELIC Differential Pressure Gage,Range 0-25 kPa,minor divisions .50. |
| 2000-2KPA | MAGNEHELIC Differential Pressure Gage,Range 0-2 kPa,minor divisions .05. |
| 2000-30KPA | MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa,minor divisions 1.0. |
| 2000-3KPA | MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa,minor divisions .10. |
| 2000-4KPA | MAGNEHELIC Differential Pressure Gage,Range 0-4 kPa,minor divisions .10. |
| 2000-5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-5 kPa,minor divisions .10. |
| 2000-8KPA | MAGNEHELIC Differential Pressure Gage,Range 0-8 kPa,minor divisions .20. |
| 2300-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Main Domestic Market | Gujarat, Karnataka, Kerala, Lakshadweep, Mizoram, Meghalaya, Manipur, Andhra Pradesh, Bihar |
| Main Export Market(s) | Western Europe, Africa, North America, Australia, Middle East, Central America, South America, Asia |
| Accuracy | 2% (-HA model 1) of FS (3% (-HA 1.5%) on -0, -100PA, -125PA, -10MM and 4% (-HA 2%) on -00, -60PA, -6 |
| Outer Size | 4" (101.6 MM) Diameter Dial Face. |
| DWYER OMEGA MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE HSN CODE | 90262000 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI / MBAR |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Marketing BY Dwyer Magnehelic Gauge Differential Pressure Gauges | ETIP - ENVIRO TECH INDUSTRIAL PRODUCTS |
| Brand | Dwyer |
| Application | POWER PLANT,CEMENT PLANT,STEEL PLANT,FERTILIZER,TEXTILE,Pharmaceutical,POWER PLANT,CEMENT PLANT,STEE |
| Enclosure Rating | IP65 |
| Media Type | AIR |
| Mounting Type | Surface |
| Process Connection | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Output Signal | No Output |
| Dial Size | 100 mm |
Select the Series 2000 Magnehelic® Gage for a versatile low Differential Pressure Gage With a Wide Choice of 81 Models and 27 Options To Choose From. Using Dwyer’s Simple,frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures--either positive,negative vacuum or differential.The design resists shock,vibration,over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1.5 kPa,minor divisions .05. |
| 2000-10KPA | MAGNEHELIC Differential Pressure Gage,Range 0-10 kPa,minor divisions .20. |
| 2000-15KPA | MAGNEHELIC Differential Pressure Gage,Range 0-15 kPa,minor divisions .50. |
| 2000-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1 kPa,minor divisions .02. |
| 2000-20KPA | MAGNEHELIC Differential Pressure Gage,Range 0-20 kPa,minor divisions .50. |
| 2000-25KPA | MAGNEHELIC Differential Pressure Gage,Range 0-25 kPa,minor divisions .50. |
| 2000-2KPA | MAGNEHELIC Differential Pressure Gage,Range 0-2 kPa,minor divisions .05. |
| 2000-30KPA | MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa,minor divisions 1.0. |
| 2000-3KPA | MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa,minor divisions .10. |
| 2000-4KPA | MAGNEHELIC Differential Pressure Gage,Range 0-4 kPa,minor divisions .10. |
| 2000-5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-5 kPa,minor divisions .10. |
| 2000-8KPA | MAGNEHELIC Differential Pressure Gage,Range 0-8 kPa,minor divisions .20. |
| 2300-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Differential Range | 0-100 INCH |
| Dial Size | 100 mm |
| Output Signal | No Output |
| Process Connection | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Mounting Type | Panel |
| Media Type | Air |
| Enclosure Rating | IP65 |
| Application | HVAC |
| Brand | Dwyer |
| Main Domestic Market | Sikkim, Tamil Nadu, Telangana, Tripura, Pondicherry, Uttar Pradesh, Uttarakhand, West Bengal |
| Main Export Market(s) | Western Europe, Africa, North America, Australia, Middle East, Central America, South America, Asia |
| Accuracy | 2% (-HA model 1) of FS (3% (-HA 1.5%) on -0, -100PA, -125PA, -10MM and 4% (-HA 2%) on -00, -60PA, -6 |
| Outer Size | 4" (101.6 MM) Diameter Dial Face. |
| DWYER OMEGA MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE HSN CODE | 90262000 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI / MBAR |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES Indicate Positive,Negative or Differential,Accurate within 1%
Select the Series 2000 Magnehelic® Gage for a versatile low Differential Pressure Gage With a Wide Choice of 81 Models and 27 Options To Choose From. Using Dwyer’s Simple,frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures--either positive,negative vacuum or differential.The design resists shock,vibration,over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1.5 kPa,minor divisions .05. |
| 2000-10KPA | MAGNEHELIC Differential Pressure Gage,Range 0-10 kPa,minor divisions .20. |
| 2000-15KPA | MAGNEHELIC Differential Pressure Gage,Range 0-15 kPa,minor divisions .50. |
| 2000-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1 kPa,minor divisions .02. |
| 2000-20KPA | MAGNEHELIC Differential Pressure Gage,Range 0-20 kPa,minor divisions .50. |
| 2000-25KPA | MAGNEHELIC Differential Pressure Gage,Range 0-25 kPa,minor divisions .50. |
| 2000-2KPA | MAGNEHELIC Differential Pressure Gage,Range 0-2 kPa,minor divisions .05. |
| 2000-30KPA | MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa,minor divisions 1.0. |
| 2000-3KPA | MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa,minor divisions .10. |
| 2000-4KPA | MAGNEHELIC Differential Pressure Gage,Range 0-4 kPa,minor divisions .10. |
| 2000-5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-5 kPa,minor divisions .10. |
| 2000-8KPA | MAGNEHELIC Differential Pressure Gage,Range 0-8 kPa,minor divisions .20. |
| 2300-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI / MBAR |
| DWYER OMEGA MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE HSN CODE | 90262000 |
| Accuracy | 2% (-HA model 1) of FS (3% (-HA 1.5%) on -0, -100PA, -125PA, -10MM and 4% (-HA 2%) on -00, -60PA, -6 |
| Main Export Market(s) | Western Europe, Africa, North America, Australia, Middle East, Central America, South America, Asia |
| Main Domestic Market | Delhi, Dadra and Nagar Haveli, Andaman and Nicobar Islands, Arunachal Pradesh, Chhattisgarh, Haryana |
| Brand | Dwyer |
| Application | HVAC |
| Enclosure Rating | IP65 |
| Media Type | Air |
| Mounting Type | Panel |
| Process Connection | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Output Signal | No Output |
| Dial Size | 100 mm |
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES Indicate Positive,Negative or Differential,Accurate within 1%
Select the Series 2000 Magnehelic® Gage for a versatile low Differential Pressure Gage With a Wide Choice of 81 Models and 27 Options To Choose From. Using Dwyer’s Simple,frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures--either positive,negative vacuum or differential.The design resists shock,vibration,over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1.5 kPa,minor divisions .05. |
| 2000-10KPA | MAGNEHELIC Differential Pressure Gage,Range 0-10 kPa,minor divisions .20. |
| 2000-15KPA | MAGNEHELIC Differential Pressure Gage,Range 0-15 kPa,minor divisions .50. |
| 2000-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1 kPa,minor divisions .02. |
| 2000-20KPA | MAGNEHELIC Differential Pressure Gage,Range 0-20 kPa,minor divisions .50. |
| 2000-25KPA | MAGNEHELIC Differential Pressure Gage,Range 0-25 kPa,minor divisions .50. |
| 2000-2KPA | MAGNEHELIC Differential Pressure Gage,Range 0-2 kPa,minor divisions .05. |
| 2000-30KPA | MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa,minor divisions 1.0. |
| 2000-3KPA | MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa,minor divisions .10. |
| 2000-4KPA | MAGNEHELIC Differential Pressure Gage,Range 0-4 kPa,minor divisions .10. |
| 2000-5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-5 kPa,minor divisions .10. |
| 2000-8KPA | MAGNEHELIC Differential Pressure Gage,Range 0-8 kPa,minor divisions .20. |
| 2300-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Dial Size | 100 mm |
| Output Signal | No Output |
| Process Connection | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Mounting Type | Surface |
| Media Type | Air |
| Enclosure Rating | IP65 |
| Application | Clean Room |
| Brand | Dwyer |
| Marketing BY Dwyer Magnehelic Gauge Differential Pressure Gauges | ETIP - ENVIRO TECH INDUSTRIAL PRODUCTS |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI / MBAR |
| DWYER OMEGA MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE HSN CODE | 90262000 |
| Outer Size | 4" (101.6 MM) Diameter Dial Face. |
| Accuracy | 2% (-HA model 1) of FS (3% (-HA 1.5%) on -0, -100PA, -125PA, -10MM and 4% (-HA 2%) on -00, -60PA, -6 |
| Main Export Market(s) | Western Europe, Africa, North America, Australia, Middle East, Central America, South America, Asia |
| Main Domestic Market | Himachal Pradesh, Jammu and Kashmir, Madhya Pradesh, Maharashtra, Nagaland, Rajasthan, Sikkim |
Select the Series 2000 Magnehelic® Gage for a versatile low Differential Pressure Gage With a Wide Choice of 81 Models and 27 Options To Choose From. Using Dwyer’s Simple,frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures--either positive,negative vacuum or differential.The design resists shock,vibration,over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1.5 kPa,minor divisions .05. |
| 2000-10KPA | MAGNEHELIC Differential Pressure Gage,Range 0-10 kPa,minor divisions .20. |
| 2000-15KPA | MAGNEHELIC Differential Pressure Gage,Range 0-15 kPa,minor divisions .50. |
| 2000-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1 kPa,minor divisions .02. |
| 2000-20KPA | MAGNEHELIC Differential Pressure Gage,Range 0-20 kPa,minor divisions .50. |
| 2000-25KPA | MAGNEHELIC Differential Pressure Gage,Range 0-25 kPa,minor divisions .50. |
| 2000-2KPA | MAGNEHELIC Differential Pressure Gage,Range 0-2 kPa,minor divisions .05. |
| 2000-30KPA | MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa,minor divisions 1.0. |
| 2000-3KPA | MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa,minor divisions .10. |
| 2000-4KPA | MAGNEHELIC Differential Pressure Gage,Range 0-4 kPa,minor divisions .10. |
| 2000-5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-5 kPa,minor divisions .10. |
| 2000-8KPA | MAGNEHELIC Differential Pressure Gage,Range 0-8 kPa,minor divisions .20. |
| 2300-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| SERIES | 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES |
| Dial Size | 100 mm |
| Output Signal | No Output |
| Process Connection | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Mounting Type | Surface |
| Media Type | AIR |
| Enclosure Rating | IP65 |
| Application | POWER PLANT,CEMENT PLANT,STEEL PLANT,FERTILIZER,TEXTILE,Pharmaceutical,POWER PLANT,CEMENT PLANT,STEE |
| Brand | Dwyer |
| Marketing BY Dwyer Magnehelic Gauge Differential Pressure Gauges | ETIP - ENVIRO TECH INDUSTRIAL PRODUCTS |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI / MBAR |
| DWYER OMEGA MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE HSN CODE | 90262000 |
| Outer Size | 4" (101.6 MM) Diameter Dial Face. |
| Accuracy | 2% (-HA model 1) of FS (3% (-HA 1.5%) on -0, -100PA, -125PA, -10MM and 4% (-HA 2%) on -00, -60PA, -6 |
| Main Export Market(s) | Western Europe, Africa, North America, Australia, Middle East, Central America, South America, Asia |
| Main Domestic Market | Chandigarh, Delhi, Kerala, Madhya Pradesh, Manipur, North India, South India, Uttarakhand, Andaman a |
Select the Series 2000 Magnehelic® Gage for a versatile low Differential Pressure Gage With a Wide Choice of 81 Models and 27 Options To Choose From. Using Dwyer’s Simple,frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures--either positive,negative vacuum or differential.The design resists shock,vibration,over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1.5 kPa,minor divisions .05. |
| 2000-10KPA | MAGNEHELIC Differential Pressure Gage,Range 0-10 kPa,minor divisions .20. |
| 2000-15KPA | MAGNEHELIC Differential Pressure Gage,Range 0-15 kPa,minor divisions .50. |
| 2000-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1 kPa,minor divisions .02. |
| 2000-20KPA | MAGNEHELIC Differential Pressure Gage,Range 0-20 kPa,minor divisions .50. |
| 2000-25KPA | MAGNEHELIC Differential Pressure Gage,Range 0-25 kPa,minor divisions .50. |
| 2000-2KPA | MAGNEHELIC Differential Pressure Gage,Range 0-2 kPa,minor divisions .05. |
| 2000-30KPA | MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa,minor divisions 1.0. |
| 2000-3KPA | MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa,minor divisions .10. |
| 2000-4KPA | MAGNEHELIC Differential Pressure Gage,Range 0-4 kPa,minor divisions .10. |
| 2000-5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-5 kPa,minor divisions .10. |
| 2000-8KPA | MAGNEHELIC Differential Pressure Gage,Range 0-8 kPa,minor divisions .20. |
| 2300-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Dial Size | 100 mm |
| Output Signal | No Output |
| Process Connection | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Mounting Type | Surface |
| Media Type | Air |
| Enclosure Rating | IP65 |
| Application | POWER PLANT,CEMENT PLANT,STEEL PLANT,FERTILIZER,TEXTILE,Pharmaceutical,POWER PLANT,CEMENT PLANT,STEE |
| Brand | Dwyer |
| Marketing BY Dwyer Magnehelic Gauge Differential Pressure Gauges | ETIP - ENVIRO TECH INDUSTRIAL PRODUCTS |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI / MBAR |
| DWYER OMEGA MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE HSN CODE | 90262000 |
| Outer Size | 4" (101.6 MM) Diameter Dial Face. |
| Accuracy | 2% (-HA model 1) of FS (3% (-HA 1.5%) on -0, -100PA, -125PA, -10MM and 4% (-HA 2%) on -00, -60PA, -6 |
| Main Export Market(s) | Western Europe, Africa, North America, Australia, Middle East, Central America, South America, Asia |
| Main Domestic Market | Himachal Pradesh, Jammu and Kashmir, Madhya Pradesh, Maharashtra, Nagaland, Rajasthan, Sikkim |
Select the Series 2000 Magnehelic® Gage for a versatile low Differential Pressure Gage With a Wide Choice of 81 Models and 27 Options To Choose From. Using Dwyer’s Simple,frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures--either positive,negative vacuum or differential.The design resists shock,vibration,over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1.5 kPa,minor divisions .05. |
| 2000-10KPA | MAGNEHELIC Differential Pressure Gage,Range 0-10 kPa,minor divisions .20. |
| 2000-15KPA | MAGNEHELIC Differential Pressure Gage,Range 0-15 kPa,minor divisions .50. |
| 2000-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1 kPa,minor divisions .02. |
| 2000-20KPA | MAGNEHELIC Differential Pressure Gage,Range 0-20 kPa,minor divisions .50. |
| 2000-25KPA | MAGNEHELIC Differential Pressure Gage,Range 0-25 kPa,minor divisions .50. |
| 2000-2KPA | MAGNEHELIC Differential Pressure Gage,Range 0-2 kPa,minor divisions .05. |
| 2000-30KPA | MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa,minor divisions 1.0. |
| 2000-3KPA | MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa,minor divisions .10. |
| 2000-4KPA | MAGNEHELIC Differential Pressure Gage,Range 0-4 kPa,minor divisions .10. |
| 2000-5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-5 kPa,minor divisions .10. |
| 2000-8KPA | MAGNEHELIC Differential Pressure Gage,Range 0-8 kPa,minor divisions .20. |
| 2300-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Main Domestic Market | Himachal Pradesh, Jammu and Kashmir, Madhya Pradesh, Maharashtra, Nagaland, Rajasthan, Sikkim |
| Main Export Market(s) | Western Europe, Africa, North America, Australia, Middle East, Central America, South America, Asia |
| Accuracy | 2% (-HA model 1) of FS (3% (-HA 1.5%) on -0, -100PA, -125PA, -10MM and 4% (-HA 2%) on -00, -60PA, -6 |
| Outer Size | 4" (101.6 MM) Diameter Dial Face. |
| DWYER OMEGA MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE HSN CODE | 90262000 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI / MBAR |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Marketing BY Dwyer Magnehelic Gauge Differential Pressure Gauges | ETIP - ENVIRO TECH INDUSTRIAL PRODUCTS |
| Brand | Dwyer |
| Application | Clean Room |
| Enclosure Rating | IP65 |
| Media Type | Air |
| Mounting Type | Surface |
| Process Connection | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Output Signal | No Output |
| Dial Size | 100 mm |
Select the Series 2000 Magnehelic® Gage for a versatile low Differential Pressure Gage With a Wide Choice of 81 Models and 27 Options To Choose From. Using Dwyer’s Simple,frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures--either positive,negative vacuum or differential.The design resists shock,vibration,over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1.5 kPa,minor divisions .05. |
| 2000-10KPA | MAGNEHELIC Differential Pressure Gage,Range 0-10 kPa,minor divisions .20. |
| 2000-15KPA | MAGNEHELIC Differential Pressure Gage,Range 0-15 kPa,minor divisions .50. |
| 2000-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1 kPa,minor divisions .02. |
| 2000-20KPA | MAGNEHELIC Differential Pressure Gage,Range 0-20 kPa,minor divisions .50. |
| 2000-25KPA | MAGNEHELIC Differential Pressure Gage,Range 0-25 kPa,minor divisions .50. |
| 2000-2KPA | MAGNEHELIC Differential Pressure Gage,Range 0-2 kPa,minor divisions .05. |
| 2000-30KPA | MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa,minor divisions 1.0. |
| 2000-3KPA | MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa,minor divisions .10. |
| 2000-4KPA | MAGNEHELIC Differential Pressure Gage,Range 0-4 kPa,minor divisions .10. |
| 2000-5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-5 kPa,minor divisions .10. |
| 2000-8KPA | MAGNEHELIC Differential Pressure Gage,Range 0-8 kPa,minor divisions .20. |
| 2300-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Dial Size | 100 mm |
| Output Signal | No Output |
| Process Connection | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Mounting Type | Panel |
| Media Type | Air |
| Enclosure Rating | IP65 |
| Application | HVAC |
| Brand | Dwyer |
| Main Domestic Market | Telangana, Daman and Diu, Kerala, Jharkhand, Uttarakhand, Bihar, Lakshadweep, Manipur, Delhi |
| Main Export Market(s) | Western Europe, Africa, North America, Australia, Middle East, Central America, South America, Asia |
| Accuracy | 2% (-HA model 1) of FS (3% (-HA 1.5%) on -0, -100PA, -125PA, -10MM and 4% (-HA 2%) on -00, -60PA, -6 |
| Outer Size | 4" (101.6 MM) Diameter Dial Face. |
| DWYER OMEGA MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE HSN CODE | 90262000 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI / MBAR |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES Indicate Positive,Negative or Differential,Accurate within 1%
Select the Series 2000 Magnehelic® Gage for a versatile low Differential Pressure Gage With a Wide Choice of 81 Models and 27 Options To Choose From. Using Dwyer’s Simple,frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures--either positive,negative vacuum or differential.The design resists shock,vibration,over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1.5 kPa,minor divisions .05. |
| 2000-10KPA | MAGNEHELIC Differential Pressure Gage,Range 0-10 kPa,minor divisions .20. |
| 2000-15KPA | MAGNEHELIC Differential Pressure Gage,Range 0-15 kPa,minor divisions .50. |
| 2000-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0-1 kPa,minor divisions .02. |
| 2000-20KPA | MAGNEHELIC Differential Pressure Gage,Range 0-20 kPa,minor divisions .50. |
| 2000-25KPA | MAGNEHELIC Differential Pressure Gage,Range 0-25 kPa,minor divisions .50. |
| 2000-2KPA | MAGNEHELIC Differential Pressure Gage,Range 0-2 kPa,minor divisions .05. |
| 2000-30KPA | MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa,minor divisions 1.0. |
| 2000-3KPA | MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa,minor divisions .10. |
| 2000-4KPA | MAGNEHELIC Differential Pressure Gage,Range 0-4 kPa,minor divisions .10. |
| 2000-5KPA | MAGNEHELIC Differential Pressure Gage,Range 0-5 kPa,minor divisions .10. |
| 2000-8KPA | MAGNEHELIC Differential Pressure Gage,Range 0-8 kPa,minor divisions .20. |
| 2300-1KPA | MAGNEHELIC Differential Pressure Gage,Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Additional Information:
Explore More Products
© Enviro Tech Industrial Products. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited