Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Brand | DWYER |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Country of Origin | Made in India |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI |
| DWYER Magnehelic Gauge HSN CODE | 90262000 |
| Overpressure | Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa) |
| Process Connections | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Housing | Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 16 |
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES Indicate Positive, Negative or Differential, Accurate within 1%
Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures--either positive, negative (vacuum) or Differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | Differential Pressure Gage, Range 0-1.5 kPa, minor divisions .05. |
| 2000-10KPA | Differential Pressure Gage, Range 0-10 kPa, minor divisions .20. |
| 2000-15KPA | Differential Pressure Gage, Range 0-15 kPa, minor divisions .50. |
| 2000-1KPA | Differential Pressure Gage, Range 0-1 kPa, minor divisions .02. |
| 2000-20KPA | Differential Pressure Gage, Range 0-20 kPa, minor divisions .50. |
| 2000-25KPA | Differential Pressure Gage, Range 0-25 kPa, minor divisions .50. |
| 2000-2KPA | Differential Pressure Gage, Range 0-2 kPa, minor divisions .05. |
| 2000-30KPA | Differential Pressure Gage, Range 0-30 kPa, minor divisions 1.0. |
| 2000-3KPA | Differential Pressure Gage, Range 0-3 kPa, minor divisions .10. |
| 2000-4KPA | Differential Pressure Gage, Range 0-4 kPa, minor divisions .10. |
| 2000-5KPA | Differential Pressure Gage, Range 0-5 kPa, minor divisions .10. |
| 2000-8KPA | Differential Pressure Gage, Range 0-8 kPa, minor divisions .20. |
| 2300-1KPA | Differential Pressure Gage, Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Brand | DWYER |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Country of Origin | Made in India |
| Overpressure | Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa) |
| Process Connections | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Housing | Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 16 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| BRAND NAME | DWYER |
| DWYER Magnehelic Gauge HSN CODE | 90262000 |
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES Indicate Positive, Negative or Differential, Accurate within 1%
Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | Differential Pressure Gage, Range 0-1.5 kPa, minor divisions .05. |
| 2000-10KPA | Differential Pressure Gage, Range 0-10 kPa, minor divisions .20. |
| 2000-15KPA | Differential Pressure Gage, Range 0-15 kPa, minor divisions .50. |
| 2000-1KPA | Differential Pressure Gage, Range 0-1 kPa, minor divisions .02. |
| 2000-20KPA | Differential Pressure Gage, Range 0-20 kPa, minor divisions .50. |
| 2000-25KPA | Differential Pressure Gage, Range 0-25 kPa, minor divisions .50. |
| 2000-2KPA | Differential Pressure Gage, Range 0-2 kPa, minor divisions .05. |
| 2000-30KPA | Differential Pressure Gage, Range 0-30 kPa, minor divisions 1.0. |
| 2000-3KPA | Differential Pressure Gage, Range 0-3 kPa, minor divisions .10. |
| 2000-4KPA | Differential Pressure Gage, Range 0-4 kPa, minor divisions .10. |
| 2000-5KPA | Differential Pressure Gage, Range 0-5 kPa, minor divisions .10. |
| 2000-8KPA | Differential Pressure Gage, Range 0-8 kPa, minor divisions .20. |
| 2300-1KPA | Differential Pressure Gage, Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Brand | DWYER |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Country of Origin | Made in India |
| Overpressure | Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa) |
| Process Connections | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Housing | Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 16 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| BRAND NAME | DWYER |
| DWYER Magnehelic Gauge HSN CODE | 90262000 |
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES Indicate Positive, Negative or Differential, Accurate within 1%
Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | Differential Pressure Gage, Range 0-1.5 kPa, minor divisions .05. |
| 2000-10KPA | Differential Pressure Gage, Range 0-10 kPa, minor divisions .20. |
| 2000-15KPA | Differential Pressure Gage, Range 0-15 kPa, minor divisions .50. |
| 2000-1KPA | Differential Pressure Gage, Range 0-1 kPa, minor divisions .02. |
| 2000-20KPA | Differential Pressure Gage, Range 0-20 kPa, minor divisions .50. |
| 2000-25KPA | Differential Pressure Gage, Range 0-25 kPa, minor divisions .50. |
| 2000-2KPA | Differential Pressure Gage, Range 0-2 kPa, minor divisions .05. |
| 2000-30KPA | Differential Pressure Gage, Range 0-30 kPa, minor divisions 1.0. |
| 2000-3KPA | Differential Pressure Gage, Range 0-3 kPa, minor divisions .10. |
| 2000-4KPA | Differential Pressure Gage, Range 0-4 kPa, minor divisions .10. |
| 2000-5KPA | Differential Pressure Gage, Range 0-5 kPa, minor divisions .10. |
| 2000-8KPA | Differential Pressure Gage, Range 0-8 kPa, minor divisions .20. |
| 2300-1KPA | Differential Pressure Gage, Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Brand | DWYER |
| Use | Process Industries |
| Display Type | Analog |
| Country of Origin | Made in India |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI |
| DWYER Magnehelic Gauge HSN CODE | 90262000 |
| Overpressure | Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa) |
| Process Connections | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Housing | Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 16 |
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES Indicate Positive, Negative or Differential, Accurate within 1%
Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | Differential Pressure Gage, Range 0-1.5 kPa, minor divisions .05. |
| 2000-10KPA | Differential Pressure Gage, Range 0-10 kPa, minor divisions .20. |
| 2000-15KPA | Differential Pressure Gage, Range 0-15 kPa, minor divisions .50. |
| 2000-1KPA | Differential Pressure Gage, Range 0-1 kPa, minor divisions .02. |
| 2000-20KPA | Differential Pressure Gage, Range 0-20 kPa, minor divisions .50. |
| 2000-25KPA | Differential Pressure Gage, Range 0-25 kPa, minor divisions .50. |
| 2000-2KPA | Differential Pressure Gage, Range 0-2 kPa, minor divisions .05. |
| 2000-30KPA | Differential Pressure Gage, Range 0-30 kPa, minor divisions 1.0. |
| 2000-3KPA | Differential Pressure Gage, Range 0-3 kPa, minor divisions .10. |
| 2000-4KPA | Differential Pressure Gage, Range 0-4 kPa, minor divisions .10. |
| 2000-5KPA | Differential Pressure Gage, Range 0-5 kPa, minor divisions .10. |
| 2000-8KPA | Differential Pressure Gage, Range 0-8 kPa, minor divisions .20. |
| 2300-1KPA | Differential Pressure Gage, Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Brand | DWYER |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Country of Origin | Made in India |
| Overpressure | Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa) |
| Process Connections | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
| Housing | Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 16 |
| DWYER Magnehelic Gauge HSN CODE | 90262000 |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| BRAND NAME | DWYER |
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES Indicate Positive, Negative or Differential, Accurate within 1%
Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
NIST CALIBRATION available in Product Configurator.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see Series AT-2000 for ATEX approved.
California Residents: Click Here for Proposition 65 WARNING.
PRODUCT APPLICATIONS
| Model | Description |
|---|---|
| 2000-1.5KPA | Differential Pressure Gage, Range 0-1.5 kPa, minor divisions .05. |
| 2000-10KPA | Differential Pressure Gage, Range 0-10 kPa, minor divisions .20. |
| 2000-15KPA | Differential Pressure Gage, Range 0-15 kPa, minor divisions .50. |
| 2000-1KPA | Differential Pressure Gage, Range 0-1 kPa, minor divisions .02. |
| 2000-20KPA | Differential Pressure Gage, Range 0-20 kPa, minor divisions .50. |
| 2000-25KPA | Differential Pressure Gage, Range 0-25 kPa, minor divisions .50. |
| 2000-2KPA | Differential Pressure Gage, Range 0-2 kPa, minor divisions .05. |
| 2000-30KPA | Differential Pressure Gage, Range 0-30 kPa, minor divisions 1.0. |
| 2000-3KPA | Differential Pressure Gage, Range 0-3 kPa, minor divisions .10. |
| 2000-4KPA | Differential Pressure Gage, Range 0-4 kPa, minor divisions .10. |
| 2000-5KPA | Differential Pressure Gage, Range 0-5 kPa, minor divisions .10. |
| 2000-8KPA | Differential Pressure Gage, Range 0-8 kPa, minor divisions .20. |
| 2300-1KPA | Differential Pressure Gage, Range 0.5-0-0.5 kPa, minor divisions .02. |
| 2300-3KPA | Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10. |
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 24 Piece |
| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Mounting | Diaphragm In Vertical Position. Consult Factory For Other Position Orientations |
| Model Name/Number | SERIES 2000 |
| Window Material | Acrylic |
| Weight | 700 G |
| Country of Origin | Made in India |
| MAGNEHELIC DIFFERENTIAL PRESSURE GAGES HSN CODE | 90262000 |
Aving Vast Experience in The Relevant Industry, We Are Engaged in providing a Broad Assortment of DWYER Magnehelic Differential Pressure Gauge That is Assemble in Order to Meet Specific demands of customers. Moreover, a series of quality tests is performed on offered gauge to ensure a defect free Delivery at Client’s end. Clients can avail the offered range from us at market leading prices within stipulated time frame.
Features:
Specifications:
Technical Specifications:
Applications:
Additional Information:
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 24 Piece |
| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Mounting | Back |
| Material of Casing | Plastic |
| Model Name/Number | Series 2000 Magnehelic Differential Pressure Gauges |
| Pointer Material | Aluminium Black |
| Window Material | Acrylic |
| Country of Origin | Made in India |
| Service | Air and non-combustible,compatible gases May be used with hydrogen Pressures must be less than 35 p |
| Housing | Die cast aluminum case and bezel,with acrylic cover Exterior finish is coated gray to withstand 16 |
| Mounting Orientation | Diaphragm In Vertical Position |
| Dimensions | 4" (101.6 mm) diameter dial face |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH / PSI |
| Service | Air and non-combustible, compatible gases May be used with hydrogen Pressures must be less than 35 psi |
| Housing | Die cast aluminum case and bezel, with acrylic cover Exterior finish is coated gray to withstand 168 hour salt spray corrosion test |
| Accuracy | ±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100 PA, -125 PA, -10 MM ±4% (-HA ±2%) on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C) |
| Pressure Limits | -20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar) MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar) |
| Enclosure Rating | IP67 |
| Overpressure | Relief plug opens at approximately 25 psig (1.72 bar), standard gages only |
| Temperature Limits | 20 to 140°F (-6.67 to 60°C) -20°F (-28°C) with low temperature option |
| Mounting Orientation | Diaphragm In Vertical Position |
| Process Connections | ⅛" emale NPT Duplicate High And Low Pressure Taps - One Pair Side And One Pair Back |
| Dimensions | 4" (101.6 mm) diameter dial face |
Additional Information:
Explore More Products
© Enviro Tech Industrial Products. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited