Send Email
0804533601182% Response Rate
Search
Dwyer Stainless Steel Pitot Tube Wholesalers
Welcome To Enviro Tech Industrial Products -MOBIL NO - 9871034100Dwyer Stainless Steel Pitot Tube Wholesalers
- Dwyer 160 Kit Pitot Tube Set Of Standard Tubes.
- Dwyer 160-8 Stainless Steel Pitot Tube.
- Dwyer 160-60 Stainless Steel Pitot Tube
- Dwyer 160-48 Stainless Steel Pitot Tube.
- Dwyer 160-36 Stainless Steel Pitot Tube.
- Dwyer 160-24 Stainless Steel Pitot Tube.
- Dwyer 160-216 Stainless Steel Pitot Tube.
- Dwyer 160-12 Stainless Steel Pitot Tube.
- Dwyer 160-168 Stainless Steel Pitot Tube.
- Dwyer 160-18 Stainless Steel Pitot Tube.
- Dwyer 160-120 Stainless Steel Pitot Tube.
- Dwyer 160-8 Stainless Steel Pitot Tube.
- Dwyer 160-KIT Pitot Tube Kit Containing 160-18,160-24,160-36,160-48 and Carrying Case.
- Dwyer 166-12 Pocket Size Pitot Tube.
- Dwyer Instruments 166-12-CF Pocket Size Pitot Tube.
- Dwyer 167-6-CF Pocket Size Pitot Tube.
- Dwyer 166-6 Pocket Size Pitot Tube.
- Dwyer 166-6-CF Pocket Size Pitot Tube.
- Dwyer 167-12 Pocket Size Pitot Tube.
- Dwyer 167-12-CF Pocket Size Pitot Tube.
- Dwyer 167-6 Pocket Size Pitot Tube.
- Dwyer Stainless Steel Pitot Tube.
- Dwyer Telescoping Stainless Steel Pitot Tube.
- Dwyer 166-6 Stainless Steel Pitot Tube 6" Insertion Length 1/8" Diameter 3" Tip.
- Dwyer 166-12 Stainless Steel Pitot Tube,12" Insertion Length, 1/8" Diameter,3" Tip.
Dwyer Stainless Steel Pitot Tube
REQUEST CALLBACK
-
-
-
- +6
Get Best Quote
Approx. Rs 12,500 / NumberGet Latest Price
Product BrochureProduct Details:| Model Name/Number | 160 S |
| Material | SS 304 |
| Pressure Connection | Female NPT connections |
| Size | 1/8 inch |
| Temperature | 1500 degree F |
| Diameter | 4 to 432 inches |
| Brand | Dwyer USA |
Dwyer Stainless Steel Pitot Tube is ideal to be used in the industrial operations with our precision manometers and Air Velocity Gages. Various Standard Sizes Are Available For Use in Ducts.
Features:
- No Calibration Needed.
- Precisely located, burr-free static Pressure Holes.
- Hemispherical tip design, Best for Accuracy if imperfectly Aligned and Nearly Impossible to Damage.
- Long lasting construction.
- Dwyer Air Velocity Calculator, direct reading flow charts and instructions included.
- Use 1/8" Models in ducts as small as 4" and 5/16" Models in Ducts 10" or larger.
- Optional Mounting Gland or Split Flange Make Permanent Installation Fast and Simple.
- ASME Design Meets AMCA & ASHRAE Specifications.
Applications:
- Monitor or Control Air Velocity or Air Flow When Combined With Differential Pressure Gage, Switch, Or Transmitter
Details:
| Model | Description |
|---|---|
| 160-12 | Stainless steel Pitot tube, 5/16" dia., 12-5/8" insertion length. |
| 160-120 | Stainless steel Pitot tube, 5/16" dia., 120" insertion length. |
| 160-168 | Stainless steel Pitot tube, 5/16" dia., 168" insertion length. |
| 160-18 | Stainless steel Pitot tube, 5/16" dia., 18-5/8" insertion length. |
| 160-216 | Stainless steel Pitot tube, 5/16" dia., 216" insertion length. |
| 160-24 | Stainless steel Pitot tube, 5/16" dia., 24-5/8" insertion length. |
| 160-36 | Stainless steel Pitot tube, 5/16" dia., 36-5/8" insertion length. |
| 160-48 | Stainless steel Pitot tube, 5/16" dia., 48-5/8" insertion length. |
| 160-60 | Stainless steel Pitot tube, 5/16" dia., 60-5/8" insertion length. |
| 160-8 | Stainless steel Pitot tube, 5/16" dia., 8-5/8" insertion length. |
| 160-96 | Stainless steel Pitot tube, 5/16" dia., 96" insertion length. |
| 160-KIT | Kit containing 160-18, 160-24, 160-36, 160-48, and FREE carrying case ($150 value) |
| 160-U | Universal Pitot tube for permanent installation and connection to metal tubing, make any length with 3/4" sch. 40 pipe, 3/4" to 1/2" reducing bushing and 1/4" metal tubing. |
| 166-12 | Pocket size Pitot tube, 1/8" dia., 12" insertion length, 3" tip. |
| 166-12-CF | Pocket size Pitot tube, 1/8" dia., 12" insertion length, 3" tip, with 1/8" male NPT compression fitting. |
| 166-6 | Pocket size Pitot tube, 1/8" dia., 6" insertion length, 3" tip. |
| 166-6-CF | Pocket size Pitot tube, 1/8" dia., 6" insertion length, 3" tip, with 1/8" male NPT compression fitting. |
| 167-12 | Pocket size Pitot tube, 1/8" dia., 12" insertion length, 1-1/2" tip. |
| 167-12-CF | Pocket size Pitot tube, 1/8" dia., 12" insertion length, 1-1/2" tip, with 1/8" male NPT compression fitting. |
| 167-6 | Pocket size Pitot tube, 1/8" dia., 6" insertion length, 1-1/2" tip. |
| 167-6-CF | Pocket size Pitot tube, 1/8" dia., 6" insertion length, 1-1/2" tip, with 1/8" male NPT compression fitting. |
Yes! I am interested
Dwyer 160-96 Stainless Steel Pitot Tube
REQUEST CALLBACK
-
-
-
- +3
Get Best Quote
Approx. Rs 25,000 / NumberGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Number |
| Model Name/Number | Dwyer 160-96 |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Diameter | 5/16" |
| Product Type | Stainless Steel Pitot Tube |
| Tube Diameter | 5/16" |
| Brand | DWYER USA |
| Country of Origin | Made in India |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
| Insertion Length | 96" |
Dwyer 160-8 Stainless Steel Pitot Tube.
- Dwyer Instruments 160-8
- SS Pitot Tube w/Stiffener,5/16" dia.,96"insertion
- Order #: 160-96
- Mfg #: 160-96
Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4" diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4" schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.
- Availability: Ships in 5-6 Weeks
Product Highlights
- No Calibration Needed
- Precisely Located, Burr-Free Static Pressure Holes
- Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
- Long Lasting 304 Stainless Steel Construction
- Silver Soldered Connections For Leak-Proof Operation
- ASME Design Meets AMCA And ASHRAE Specification
- Coefficient of "1
- 5/16" Models Rated To 1500 F
- Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
- Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
- Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
- Use 1/8" Models in Ducts As Small as 4", 5/16" Models in Ducts 10" Or Larger
- Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
- 5/16" Diameter
- 96'''' Insertion Length
Additional Information:
- Item Code: Dwyer-160-96-Stainless-Steel-Pitot-Tube
- Production Capacity: www.envirotechdelhi.com
- Delivery Time: www.envirotechindia.co.in
- Packaging Details: www.envirotechdelhi.in
Yes! I am interested
Dwyer 160-18 Stainless Steel Pitot Tube
REQUEST CALLBACK
-
-
-
- +3
Get Best Quote
Approx. Rs 25,000 / NumberGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Number |
| Model Name/Number | Dwyer 160-18 |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Diameter | 5/16" |
| Product Type | Stainless Steel Pitot Tube |
| Tube Diameter | 5/16" |
| Brand | DWYER USA |
| Country of Origin | Made in India |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
| Insertion Length | 18-5/8" |
Dwyer 160-18 Stainless Steel Pitot Tube.
- Dwyer Instruments 160-18
- SS Pitot Tube,5/16"dia.,18 5/8" insertion
- Order #: 160-18
- Mfg #: 160-18
Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4" diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4" schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.
- Availability: Ships in 5-6 Weeks
Product Highlights
- No Calibration Needed
- Precisely Located, Burr-Free Static Pressure Holes
- Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
- Long Lasting 304 Stainless Steel Construction
- Silver Soldered Connections For Leak-Proof Operation
- ASME Design Meets AMCA And ASHRAE Specification
- Coefficient of "1
- 5/16" Models Rated To 1500 F
- Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
- Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
- Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
- Use 1/8" Models in Ducts As Small as 4", 5/16" Models in Ducts 10" Or Larger
- Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
- 5/16" Diameter
- 18-5/8" Insertion Length
Additional Information:
- Item Code: Dwyer-160-18-Stainless-Steel-Pitot-Tube
- Production Capacity: www.envirotechindustrialproducts.net
- Delivery Time: www.envirotechindustrialproduct.net
- Packaging Details: www.envirotechindustrialproductsindia.in
Yes! I am interested
Dwyer 160-168 Stainless Steel Pitot Tube
REQUEST CALLBACK
-
-
-
- +3
Get Best Quote
Approx. Rs 25,000 / NumberGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Number |
| Model Name/Number | Dwyer 160-168 |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Diameter | 5/16" |
| Product Type | Stainless Steel Pitot Tube |
| Tube Diameter | 5/16" |
| Brand | DWYER USA |
| Country of Origin | Made in India |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
| Insertion Length | 216" |
Dwyer 160-168 Stainless Steel Pitot Tube.
- Dwyer Instruments 160-168
- Stainless Steel Pitot Tube 5/16" Diameter, 168" Length
- Order #: 160-168
- Mfg #: 160-168
Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4" diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4" schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.
- Availability: Ships in 5-6 Weeks
Product Highlights
- No Calibration Needed
- Precisely Located, Burr-Free Static Pressure Holes
- Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
- Long Lasting 304 Stainless Steel Construction
- Silver Soldered Connections For Leak-Proof Operation
- ASME Design Meets AMCA And ASHRAE Specification
- Coefficient of "1
- 5/16" Models Rated To 1500 F
- Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
- Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
- Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
- Use 1/8" Models in Ducts As Small as 4", 5/16" Models in Ducts 10" Or Larger
- Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
- 5/16" Diameter
- 168" Insertion Length
Additional Information:
- Item Code: Dwyer-160-168-Stainless-Steel-Pitot-Tube
- Production Capacity: www.envirotechindustrialproducts.in
- Delivery Time: www.envirotechindustrialproduct.com
- Packaging Details: www.envirotechindustrialproducts.com
Yes! I am interested
Dwyer 160-120 Stainless Steel Pitot Tube
REQUEST CALLBACK
-
-
-
- +3
Get Best Quote
Approx. Rs 35,000 / NumberGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Number |
| Model Name/Number | Dwyer 160-120 |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Diameter | 5/16" |
| Product Type | Stainless Steel Pitot Tube |
| Tube Diameter | 5/16" |
| Brand | DWYER USA |
| Country of Origin | Made in India |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
| Insertion Length | 120" |
Dwyer 160-120 Stainless Steel Pitot Tube.
- Dwyer Instruments 160-120
- Stainless Steel Pitot Tube 5/16" diameter, 120" length
- Order #: 160-120
- Mfg #: 160-120
Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4" diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4" schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.
- Availability: Ships in 5-6 Weeks
Product Highlights
- No Calibration Needed
- Precisely Located, Burr-Free Static Pressure Holes
- Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
- Long Lasting 304 Stainless Steel Construction
- Silver Soldered Connections For Leak-Proof Operation
- ASME Design Meets AMCA And ASHRAE Specification
- Coefficient of "1
- 5/16" Models Rated To 1500 F
- Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
- Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
- Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
- Use 1/8" Models in Ducts As Small as 4", 5/16" Models in Ducts 10" Or Larger
- Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
- 5/16" Diameter
- 120" Insertion Length
Additional Information:
- Production Capacity: www.envirotechindustrialproductsdelhi.com
- Delivery Time: www.envirotechindustrialproduct.info
- Packaging Details: www.envirotechindustrialproducts.info
Yes! I am interested
Dwyer 160-8 Stainless Steel Pitot Tube
REQUEST CALLBACK
-
-
-
- +3
Get Best Quote
Approx. Rs 25,000 / NumberGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Number |
| Model Name/Number | Dwyer 160-8 |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Diameter | 5/16" Dia |
| Product Type | Stainless Steel Pitot Tube |
| Tube Diameter | 5/16" Dia |
| Brand | DWYER USA |
| Country of Origin | Made in India |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
| Insertion Length | 8-5/8" |
Dwyer 160-8 Stainless Steel Pitot Tube
- Dwyer Instruments 160-8
- Stainless Steel Pitot Tube 5/16" Diameter, 8-5/8" Length
- Order #: 160-8
- Mfg #: 160-8
Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4" diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4" schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.
- Availability: Ships in 5-6 Weeks
Product Highlights
- No Calibration Needed
- Precisely Located, Burr-Free Static Pressure Holes
- Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
- Long Lasting 304 Stainless Steel Construction
- Silver Soldered Connections For Leak-Proof Operation
- ASME Design Meets AMCA And ASHRAE Specification
- Coefficient of "1
- 5/16" Models Rated To 1500 F
- Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
- Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
- Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
- Use 1/8" Models in Ducts As Small as 4", 5/16" Models in Ducts 10" Or Larger
- Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
- 5/16" Diameter
- 8-5/8" Insertion Length
Additional Information:
- Item Code: Dwyer-160-8-Stainless-Steel-Pitot-Tube
- Production Capacity: www.envirotechindia.net
- Delivery Time: http://www.envirotechdelhi.info
- Packaging Details: www.envirotechindia.info
Yes! I am interested
Dwyer 160-60 Stainless Steel Pitot Tube
REQUEST CALLBACK
-
-
-
- +3
Get Best Quote
Approx. Rs 25,000 / NumberGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Number |
| Model Name/Number | Dwyer 160-60 |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Diameter | 5/16" dia. |
| Product Type | Stainless Steel Pitot Tube |
| Tube Diameter | 5/16" dia. |
| Brand | DWYER USA |
| Country of Origin | Made in India |
| Insertion Length | 60-5/8" |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
Dwyer 160-60 Stainless Steel Pitot Tube
- Dwyer Instruments 160-60
- SS Pitot Tube,5/16"dia.,60-5/8" Insertion
- Order #: 160-60
- Mfg #: 160-60
Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4" diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4" schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.
- Availability: Ships in 5-6 Weeks
Product Highlights
- No Calibration Needed
- Precisely Located, Burr-Free Static Pressure Holes
- Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
- Long Lasting 304 Stainless Steel Construction
- Silver Soldered Connections For Leak-Proof Operation
- ASME Design Meets AMCA And ASHRAE Specification
- Coefficient of "1
- 5/16" Models Rated To 1500 F
- Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
- Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
- Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
- Use 1/8" Models in Ducts As Small as 4", 5/16" Models in Ducts 10" Or Larger
- Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
- 5/16" Diameter
- 60-5/8" insertion length
Additional Information:
- Production Capacity: www.envirotechdelhi.co.in
- Delivery Time: www.envirotechdelhi.net
- Packaging Details: www.envirotechdelhi.in
Yes! I am interested
Dwyer 160-48 Stainless Steel Pitot Tube
REQUEST CALLBACK
-
-
-
- +3
Get Best Quote
Approx. Rs 25,000 / NumberGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Number |
| Model Name/Number | Dwyer 160-48 |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Diameter | 5/16" Dia |
| Product Type | Stainless Steel Pitot Tube |
| Tube Diameter | 5/16" Dia |
| Brand | DWYER USA |
| Country of Origin | Made in India |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
| Insertion Length | 48-5/8" |
Dwyer 160-48 Stainless Steel Pitot Tube.
- Dwyer Instruments 160-48
- SS Pitot Tube,5/16"dia.,48-5/8" insertion
- Order #: 160-48
- Mfg #: 160-48
Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4" diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4" schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.
- Availability: Ships in 5-6 Weeks
Product Highlights
- No Calibration Needed
- Precisely Located, Burr-Free Static Pressure Holes
- Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
- Long Lasting 304 Stainless Steel Construction
- Silver Soldered Connections For Leak-Proof Operation
- ASME Design Meets AMCA And ASHRAE Specification
- Coefficient of "1
- 5/16" Models Rated To 1500 F
- Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
- Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
- Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
- Use 1/8" Models in Ducts As Small as 4", 5/16" Models in Ducts 10" Or Larger
- Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
- 5/16" Diameter
- 48-5/8" insertion length
Additional Information:
- Production Capacity: www.envirotechindia.co.in
- Delivery Time: www.envirotechdelhi.com
- Packaging Details: www.envirotechindustrialproducts.info
Yes! I am interested
Dwyer 160-36 Stainless Steel Pitot Tube
REQUEST CALLBACK
-
-
-
- +3
Get Best Quote
Approx. Rs 25,000 / NumberGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Number |
| Model Name/Number | Dwyer 160-36 |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Diameter | 5/16" Dia |
| Product Type | Stainless Steel Pitot Tube |
| Tube Diameter | 5/16" Dia |
| Brand | DWYER USA |
| Country of Origin | Made in India |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
| Insertion Length | 36-5/8" |
Dwyer 160-36 Stainless Steel Pitot Tube.
- Dwyer Instruments 160-36
- SS Pitot Tube,5/16"dia.,36-5/8" insertion
- Order #: 160-36
- Mfg #: 160-36
Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4" diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4" schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.
- Availability: Ships in 5-6 Weeks
Product Highlights
- No Calibration Needed
- Precisely Located, Burr-Free Static Pressure Holes
- Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
- Long Lasting 304 Stainless Steel Construction
- Silver Soldered Connections For Leak-Proof Operation
- ASME Design Meets AMCA And ASHRAE Specification
- Coefficient of "1
- 5/16" Models Rated To 1500 F
- Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
- Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
- Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
- Use 1/8" Models in Ducts As Small as 4", 5/16" Models in Ducts 10" Or Larger
- Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
- 5/16" Diameter
- 36-5/8" Insertion Length
Additional Information:
- Item Code: Dwyer-160-36-Stainless-Steel-Pitot-Tube
- Production Capacity: www.envirotechindustrialproduct.info
- Delivery Time: www.envirotechindustrialproductsdelhi.com
- Packaging Details: www.envirotechindustrialproductsindia.in
Yes! I am interested
Dwyer 160-24 Stainless Steel Pitot Tube
REQUEST CALLBACK
-
-
-
- +3
Get Best Quote
Approx. Rs 25,000 / NumberGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Number |
| Model Name/Number | Dwyer 160-24 |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Diameter | 5/16" Dia |
| Product Type | Stainless Steel Pitot Tube |
| Tube Diameter | 5/16" Dia |
| Brand | DWYER USA |
| Country of Origin | Made in India |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
| Insertion Length | 24-5/8" |
Dwyer 160-24 Stainless Steel Pitot Tube.
- Dwyer Instruments 160-24
- SS Pitot Tube,5/16"dia.,24 5/8" insertion
- Order #: 160-24
- Mfg #: 160-24
Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4" diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4" schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.
- Availability: Ships in 5-6 Weeks
Product Highlights
- No Calibration Needed
- Precisely Located, Burr-Free Static Pressure Holes
- Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
- Long Lasting 304 Stainless Steel Construction
- Silver Soldered Connections For Leak-Proof Operation
- ASME Design Meets AMCA And ASHRAE Specification
- Coefficient of "1
- 5/16" Models Rated To 1500 F
- Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
- Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
- Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
- Use 1/8" Models in Ducts As Small as 4", 5/16" Models in Ducts 10" Or Larger
- Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
- 5/16" Diameter
- 24-5/8" insertion length
Additional Information:
- Production Capacity: www.envirotechindustrialproduct.net
- Delivery Time: www.envirotechindustrialproducts.net
- Packaging Details: www.envirotechindustrialproducts.com
Yes! I am interested
Dwyer 160-216 Stainless Steel Pitot Tube
REQUEST CALLBACK
-
-
-
- +3
Get Best Quote
Approx. Rs 25,000 / NumberGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Number |
| Model Name/Number | Dwyer 160-216 |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Diameter | 5/16" |
| Product Type | Stainless Steel Pitot Tube |
| Tube Diameter | 5/16" |
| Brand | DWYER USA |
| Country of Origin | Made in India |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
| Insertion Length | 216" |
Dwyer 160-216 Stainless Steel Pitot Tube.
- Dwyer Instruments 160-216
- Stainless Steel Pitot Tube 5/16" Diameter, 216" Length
- Order #: 160-216
- Mfg #: 160-216
Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4" diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4" schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.
- Availability: Ships in 5-6 Weeks
Product Highlights
- No Calibration Needed
- Precisely Located, Burr-Free Static Pressure Holes
- Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
- Long Lasting 304 Stainless Steel Construction
- Silver Soldered Connections For Leak-Proof Operation
- ASME Design Meets AMCA And ASHRAE Specification
- Coefficient of "1
- 5/16" Models Rated To 1500 F
- Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
- Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
- Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
- Use 1/8" Models in Ducts As Small as 4", 5/16" Models in Ducts 10" Or Larger
- Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
- 5/16" Diameter
- 216" Insertion Length
Additional Information:
- Item Code: Dwyer-160-216-Stainless-Steel-Pitot-Tube
- Production Capacity: www.envirotechindustrialproduct.com
- Delivery Time: www.envirotechindustrialproducts.in
- Packaging Details: www.envirotechindustrialproduct.in
Yes! I am interested
Dwyer Telescoping Stainless Steel Pitot Tube
REQUEST CALLBACK
Get Best Quote
Approx. Rs 30,000 / NumberGet Latest Price
Product BrochureProduct Details:| Material | Stainless Steel |
| Size | 12.5 x 6.25 x 1.75 inches |
| Weight | 453.5 gm |
| Diameter | 1.8 inches |
| Tube Diameter | 1.8 inches |
| Flow Coefficient | 1.0 |
| Brand | DWYER |
Telescoping Stainless Steel Pitot Tube is a Unique Air Flow Sensor which can Quickly and Easily be Adjusted for any Duct inersertion length.
Features/Benefits:
- Adjustable length can replace up to 5 Fixed Length Pitot Tubes.
- Stainless Steel construction resists corrosion
Applications:
- Monitor or Control Air Velocity or Air Flow When Combined with Differential Pressure Gage, Switch or Transmitter Where varying lengths are needed.
Yes! I am interested
Dwyer 160-12 Stainless Steel Pitot Tube
REQUEST CALLBACK
-
-
-
- +3
Get Best Quote
Approx. Rs 25,000 / NumberGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Number |
| Model Name/Number | Dwyer 160-12 |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Diameter | 5/16" |
| Product Type | Stainless Steel Pitot Tube |
| Tube Diameter | 5/16" |
| Brand | DWYER USA |
| Country of Origin | Made in India |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
| Insertion Length | 12-5/8" |
Dwyer 160-12 Stainless Steel Pitot Tube.
- Dwyer Instruments 160-12
- SS Pitot Tube,5/16"dia.,12-5/8" insertion length
- Order #: 160-12
- Mfg #: 160-12
Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4" diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4" schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.
- Availability: Ships in 5-6 Weeks
Product Highlights
- No Calibration Needed
- Precisely Located, Burr-Free Static Pressure Holes
- Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
- Long Lasting 304 Stainless Steel Construction
- Silver Soldered Connections For Leak-Proof Operation
- ASME Design Meets AMCA And ASHRAE Specification
- Coefficient of "1
- 5/16" Models Rated To 1500 F
- Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
- Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
- Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
- Use 1/8" Models in Ducts As Small as 4", 5/16" Models in Ducts 10" Or Larger
- Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
- 5/16" Diameter
- 12-5/8" insertion length
Additional Information:
- Item Code: Dwyer-160-12-Stainless-Steel-Pitot-Tube
- Production Capacity: www.envirotechindustrialproducts.co.in
- Delivery Time: www.envirotechindustrialproduct.co.in
- Packaging Details: www.envirotechindustrialproduct.in
Yes! I am interested
Dwyer 160 Kit Pitot Tube Set Of Standard Tubes
REQUEST CALLBACK
Get Best Quote
Approx. Rs 1.5 Lakh / NumberGet Latest Price
Product BrochureProduct Details:| Usage/Application | Laboratory |
| Model Name/Number | Dwyer 160 |
| Material | Stainless Steel |
| Size | 5/16" |
| Product Type | Dwyer 160 Kit Pitot Tube Set Of Standard Tubes |
| Diameter | 5/16" |
| I Deal In | New Only |
| Brand | DWYER USA |
| Country of Origin | Made in India |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
| Item Weight | 14.00 Pounds |
| Part Number | 160-KIT |
Dwyer 160 Kit Pitot Tube Set Of Standard Tubes.
Applications:
- Pitot Tube Set of Standard Tubes
- HVAC
- Industrial & Commercial
- Residential
The Dwyer 160-KIT Pitot Tube Set of Standard Tubes includes 18”, 24”, 36”, and 48” Dwyer Pitot tubes. These Pitot Tubes are Constructed out of a Durable Stainless steel with etched insertion depth graduations and silver soldered connections to help prevent leaks. They feature a low sensitivity to misalignment up to 15 degrees, require no calibration due to their ASHRAE tip design, and are rated up to 1500°F (815.5°C).
Manufacturer Specs
Dwyer 160-KIT Pitot Tube Set of Standard Tubes Specifications
Model in Kit Insertion Length
- 160-18 18-5/8??
- 160-24 24-5/8??
- 160-36 36-5/8??
- 160-48 48-5/8??
Additional Information:
- Production Capacity: www.envirotechdelhi.net
- Delivery Time: www.envirotechdelhi.co.in
- Packaging Details: www.envirotechindia.info
Yes! I am interested
Dwyer 160-KIT Pitot Tube Kit Containing 160-18,160-24,160-36,160-48 and Carrying Case
REQUEST CALLBACK
Get Best Quote
Approx. Rs 1.5 Lakh / NumberGet Latest Price
Product BrochureProduct Details:| Brand | Dwyer USA |
| Model Name/Number | Dwyer 160-KIT Pitot Tube Kit |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Weight | 14.00 Pounds |
| Diameter | 5/16" |
| Product Type | Dwyer 160-KIT Pitot Tube Kit Containing 160-18,160-24,160-36,160-48 and Carrying Case |
| Tube Diameter | 5/16" |
| Country of Origin | Made in India |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
| Part Number | 160-KIT |
Dwyer 160-KIT Pitot Tube Kit Containing 160-18,160-24,160-36,160-48 and Carrying Case
Applications
- Pitot Tube Set of Standard Tubes
- HVAC
- Industrial & Commercial
- Residential
The Dwyer 160-KIT Pitot Tube Set of Standard Tubes includes 18”, 24”,36”,and 48” Dwyer Pitot Tubes.These Pitot Tubes are Constructed out of a Durable Stainless Steel With Etched insertion Depth Graduations and silver Soldered Connections to help prevent leaks.They Feature a low Sensitivity to Misalignment up to 15 degrees, require no Calibration due to their ASHRAE tip design,and are rated up to 1500°F (815.5°C).
Manufacturer Specs
Dwyer 160-KIT Pitot Tube Set of Standard Tubes Specifications
Model in Kit Insertion Length
- 160-18 18-5/8''
- 160-24 24-5/8''
- 160-36 36-5/8''
- 160-48 48-5/8''
SPECIFICATION :
- Brand:Dwyer USA
- Model No:160-KIT
- Our Model No:160KIT
- Condition:NEW
KEY FEATURES :
- Insertion Lengths:18-5/8",24-5/8",36-5/8",48-5/8"
- No Calibration Needed
- Precisely located,burr-free static pressure holes
- Hemispherical Tip Design,Best For Accuracy if Imperfectly Aligned and Nearly Impossible To Damage
- Long lasting 304 SS Construction
- Silver soldered connections for leak-proof operation
- Extended Static Connection Helps Guide Tip Within Recommended 15° of Air Flow Direction
- Inch Graduations on Sides of 160 Series to quickly Determine Exact insertion depth
- Dwyer Air Velocity Calculator,Direct Reading Flow Charts and instructions included
- Use 1/8" Models in Ducts as Small as 4",5/16" Models in Ducts 10" or Larger
- Optional Mounting Gland of Split Flange Make Permanent Installation Fast and Simple Sold Separately
- Meets ASME "Fluid Meters" 6th ed.ANSI/AMCA 210-99, ANSI/ASHRAE 51/1999,and British Standard 1042
- Includes Carrying Case
DETAILS :
The Dwyer 160-KIT Stainless Steel Pitot Tubes are Constructed From Corrosion Resistant Stainless Steel With Permanently etched insertion Depth Graduations for a Lifetime of Service.The Static Pressure Port is Parallel to the Sensing Tube to allow Quick,Easy Alignment of The Tube With Air Flow.The 160KIT has Probes With Insertion lengths of 18-5/8",24-5/8",36-5/8",and 48-5/8"
INCLUDED
- 1-18" Pitot Tube
- 1-24" Pitot Tube
- 1-36" Pitot Tube
- 1-48" Pitot Tube
- 1-Carrying Case
RELATED PRODUCTS
MODEL DESCRIPTION
- 160-12-CF-Dwyer 160-12-CF SS Pitot Tube,12-5/8" Insertion Length,5/16" Dia.Compression Fitting
- 160-12-Dwyer 160-12 Stainless Steel Pitot Tube,12-5/8" Insertion Length,5/16" Diameter
- 160-18-Dwyer 160-18 Stainless Steel Pitot Tube,18-5/8" Insertion Length,5/16" Diameter
- 160-24-CF-Dwyer 160-24-CF SS Pitot Tube,24-5/8" Insertion Length,5/16" Dia.Compression Fitting
- 160-24-Dwyer 160-24 Stainless Steel Pitot Tube,24-5/8" Insertion Length,5/16" Diameter
- 160-36-Dwyer 160-36 Stainless Steel Pitot Tube,36-5/8" Insertion Length,5/16" Diameter
- 160-48-Dwyer 160-48 Stainless Steel Pitot Tube,48-5/8" Insertion Length,5/16" Diameter
- 160-60-Dwyer 160-60 Stainless Steel Pitot Tube,60-5/8" Insertion Length,5/16" Diameter
- 160-8-Dwyer 160-8 Stainless Steel Pitot Tube,8-5/8" Insertion Length,5/16" Diameter
Yes! I am interested
Dwyer 166-12 Pocket Size Pitot Tube
REQUEST CALLBACK
-
-
-
- +3
Get Best Quote
Approx. Rs 25,000 / NumberGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Number |
| Model Name/Number | Dwyer 166-12 Pocket |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Diameter | 1/8" |
| Product Type | Dwyer 166-12 Pocket Size Pitot Tube |
| Tube Diameter | 1/8" |
| Brand | DWYER USA |
| Country of Origin | Made in India |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
| Insertion Length | 12" |
| Tip | 3" |
Dwyer 166-12 Pocket Size Pitot Tube.
- Dwyer Instruments 166-12
- Pocket-Size Pitot Tube,12" Insertion Tube/1/8"Diameter
- Order #: 166-12
- Mfg #: 166-12
Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4" dia. or as large as 36 ft. dia. A universal model fits user supplied 3/4" schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.
Availability: Ships in 5-6 Weeks
Product Highlights
- No calibration needed
- Precisely located, burr-free static pressure holes
- Hemispherical tip design, best for accuracy if imperfectly aligned and nearly impossible to damage
- Long lasting 304 stainless steel construction
- Silver soldered connections for leak-proof operation
- ASME design meets AMCA and ASHRAE specification
- Coefficient of "1
- 5/16" models rated to 1500 F
- Extended static connection helps guide tip within recommended 15 degrees of air flow direction
- Inch graduations on sides of 160 series to quickly determine exact insertion depth
- Dwyer Air Velocity Calculator, direct reading flow charts and instructions included
- Use 1/8" models in ducts as small as 4", 5/16" models in ducts 10" or larger
- Optional mounting gland or split flange make permanent installation fast and simple
- Pocket Size Pitot Tube
- 1/8" diameter
- 12" insertion length
- 3" tip
Additional Information:
- Item Code: Dwyer-166-12-Pocket-Size-Pitot-Tube
- Production Capacity: www.envirotechindustrialproducts.in
- Delivery Time: www.envirotechindustrialproduct.com
- Packaging Details: www.envirotechindustrialproducts.com
Yes! I am interested
Dwyer 166-12 Stainless Steel Pitot Tube,12" Insertion Length,1/8" Diameter,3" Tip
REQUEST CALLBACK
-
-
-
- +3
Get Best Quote
Approx. Rs 25,000 / NumberGet Latest Price
Product BrochureProduct Details:| Model Name/Number | Dwyer 166-12 |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Diameter | 1/8" |
| Product Type | Dwyer 166-12 Stainless Steel Pitot Tube,12" Insertion Length,1/8" Diameter,3" Tip |
| Tube Diameter | 1/8" |
| Brand | DWYER USA |
| Country of Origin | Made in India |
| Insertion Length | 12" |
| Tip | 3" |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
| MODEL | Dwyer 166-12 |
Dwyer 166-12 Stainless Steel Pitot Tube,12" Insertion Length, 1/8" Diameter,3" Tip
- Brand:Dwyer USA
- Model No:166-12
- Our Model No:166-12 DWYER USA
- Condition:NEW
KEY FEATURES :
- Insertion Length: 12"
- Tip: 3"
- No calibration needed
- Precisely located, burr-free static pressure holes
- Hemispherical tip design, best for accuracy if imperfectly aligned and nearly impossible to damage
- Long lasting 304 SS construction
- Silver soldered connections for leak-proof operation
- Coefficient of "1"
- 5/16" models rated to 1500°F
- Extended static connection helps guide tip within recommended 15° of air flow direction
- Inch graduations on sides of 160 series to quickly determine exact insertion depth
- Dwyer Air Velocity Calculator, direct reading flow charts and instructions included
- Use 1/8" models in ducts as small as 4", 5/16" models in ducts 10" or larger
- Optional mounting gland of split flange make permanent installation fast and simple (sold separately)
- Meets ASME "Fluid Meters" 6th ed., ANSI/AMCA 210-99, ANSI/ASHRAE 51/1999, and British Standard 1042
DETAILS :
The Dwyer 166-12 Stainless Steel Pitot Tube is constructed from corrosion resistant stainless steel with permanently etched insertion depth graduations for a lifetime of service. The static pressure port is parallel to the sensing tube to allow quick, easy alignment of the tube with air flow. The 16612 has a probe insertion length of 12" and a tip of 3 inches. A universal model fits the user supplied 3/4" schedule 40 pipe in any length.
RELATED PRODUCTS
MODEL DESCRIPTION
- 166-12-CF-Dwyer 166-12-CF SS Pitot Tube, 12" Insertion Length, 1/8" Dia., Compression Fitting, 3" Tip.
- 166-6-CF-Dwyer 166-6-CF SS Pitot Tube, 6" Insertion Length, 1/8" Dia., Compression Fitting, 3" Tip.
- 166-6-Dwyer 166-6 Stainless Steel Pitot Tube, 6" Insertion Length, 1/8" Diameter, 3" Tip.
Yes! I am interested
Dwyer Instruments 166-12-CF Pocket Size Pitot Tube
REQUEST CALLBACK
-
-
-
- +3
Get Best Quote
Approx. Rs 35,000 / NumberGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Number |
| Model Name/Number | 166-12-CF |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Diameter | 1/8" |
| Product Type | Dwyer Instruments 166-12-CF Pocket Size Pitot Tube |
| Tube Diameter | 1/8" |
| Brand | DWYER USA |
| Country of Origin | Made in India |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
| Insertion Length | 12" |
| Tip | 1-1/2" |
| Male NPT Compression Fitting | 1/8" |
Dwyer Instruments 166-12-CF Pocket Size Pitot Tube
- Pocket Size Pitot Tube,1/8"Dia.12" Length,1/8" Male NPT
- Order #: 166-12-CF
- Mfg #: 166-12-CF
Ideal for Use With our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4" dia. or as large as 36 ft. dia. A universal model fits user supplied 3/4" schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.
Availability: Ships in 5-6 Weeks
Product Highlights
- No Calibration Needed
- Precisely located, burr-free static pressure holes
- Hemispherical tip design, best for accuracy if imperfectly aligned and nearly impossible to damage
- Long lasting 304 stainless steel construction
- Silver soldered connections for leak-proof operation
- ASME design meets AMCA and ASHRAE specification
- Coefficient of "1
- 5/16" models rated to 1500 F
- Extended static connection helps guide tip within recommended 15 degrees of air flow direction
- Inch graduations on sides of 160 series to quickly Determine Exact Insertion Depth
- Dwyer Air Velocity Calculator, direct reading flow charts and instructions included
- Use 1/8" Models in Ducts as Small as 4", 5/16" Models in Ducts 10" or Larger
- Optional Mounting Gland or Split Flange Make Permanent Installation Fast and Simple
- Pocket Size Pitot Tube
- 1/8" Diameter
- 12" Insertion Length
- 1-1/2" Tip
- 1/8" Male NPT Compression Fitting
Additional Information:
- Item Code: Dwyer-Instruments-166-12-CF-Pocket-Size-Pitot-Tube
- Production Capacity: www.envirotechindustrialproduct.info
- Delivery Time: www.envirotechindustrialproductsdelhi.com
- Packaging Details: www.envirotechindustrialproducts.info
Yes! I am interested
Dwyer 166-6 Stainless Steel Pitot Tube 6" Insertion Length 1/8" Diameter 3" Tip
REQUEST CALLBACK
-
-
-
- +3
Get Best Quote
Approx. Rs 35,000 / NumberGet Latest Price
Product BrochureProduct Details:| Brand | Dwyer USA |
| Model Name/Number | Dwyer 166-6 |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Diameter | 1/8" |
| Product Type | Dwyer 166-6 Stainless Steel Pitot Tube 6" Insertion Length 1/8" Diameter 3" Tip |
| Tube Diameter | 1/8" |
| Country of Origin | Made in India |
| Tip | 3" |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
| Insertion Length | 6" |
| MODEL | Dwyer 166-6 |
Dwyer 166-6 Stainless Steel Pitot Tube 6" Insertion Length 1/8" Diameter 3" Tip
- Brand:Dwyer USA
- Model No:166-6
- Our Model No:166-6 DWYER USA
- Condition:NEW
KEY FEATURES :
- Insertion Length: 6"
- Tip: 3"
- No Calibration Needed
- Precisely located, burr-free static pressure holes
- Hemispherical tip design, best for accuracy if imperfectly aligned and nearly impossible to damage
- Long lasting 304 SS construction
- Silver soldered connections for leak-proof operation
- Coefficient of "1"
- 5/16" models rated to 1500°F
- Extended static connection helps guide tip within recommended 15° of air flow direction
- Inch graduations on sides of 160 series to quickly determine exact insertion depth
- Dwyer Air Velocity Calculator, direct reading flow charts and instructions included
- Use 1/8" models in ducts as small as 4", 5/16" models in ducts 10" or larger
- Optional mounting gland of split flange make permanent installation fast and simple (sold separately)
- Meets ASME "Fluid Meters" 6th ed., ANSI/AMCA 210-99, ANSI/ASHRAE 51/1999, and British Standard 1042
DETAILS :
The Dwyer 166-6 Stainless Steel Pitot Tube is constructed from corrosion resistant stainless steel with permanently etched insertion depth graduations for a lifetime of service. The static pressure port is parallel to the sensing tube to allow quick, easy alignment of the tube with air flow. The 1666 has a probe insertion length of 6" and a tip of 3 inches. A universal model fits the user supplied 3/4" schedule 40 pipe in any length.
RELATED PRODUCTS
MODEL DESCRIPTION
- 166-12-CF-Dwyer 166-12-CF SS Pitot Tube, 12" Insertion Length, 1/8" Dia., Compression Fitting, 3" Tip.
- 166-12-Dwyer 166-12 Stainless Steel Pitot Tube, 12" Insertion Length, 1/8" Diameter, 3" Tip.
- 166-6-CF-Dwyer 166-6-CF SS Pitot Tube, 6" Insertion Length, 1/8" Dia., Compression Fitting, 3" Tip.
Yes! I am interested
Dwyer 167-6-CF Pocket Size Pitot Tube
REQUEST CALLBACK
-
-
-
- +3
Get Best Quote
Approx. Rs 35,000 / NumberGet Latest Price
Product BrochureProduct Details:| Model Name/Number | Dwyer 167-6-CF |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Diameter | 1/8" |
| Product Type | Dwyer 167-6-CF Pocket Size Pitot Tube |
| Tube Diameter | 1/8" |
| Brand | DWYER USA |
| Country of Origin | Made in India |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
| Insertion Length | 6" |
| Tip | 1-1/2" |
| NPT Compression Fitting | With 1/8" Male |
Dwyer 167-6-CF Pocket Size Pitot Tube
- Dwyer Instruments 167-6-CF
- Stainless Steel Pitot Tube 1/8" Diameter, 1/8" Male NPT
- Order #: 167-6-CF
- Mfg #: 167-6-CF
Ideal for Use With Our Precision Manometers and Air Velocity gages, Dwyer Pitot Tubes Are constructed From Corrosion Resistant Stainless Steel For a Lifetime Of Service. ASME design meets AMCA and ASHRAE Specifications for Maximum Accuracy over a wide Variety of Flow conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4"diameter or as large as 36 ft. diameter. A universal model fits user supplied 3/4"schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.
Availability: Ships in 5-6 Weeks
Product Highlights
- Pocket Size Pitot Tube
- 1/8" Diameter
- 6"Insertion Length
- 1-1/2"Tip
- With 1/8"Male NPT Compression Fitting
Additional Information:
- Item Code: Dwyer-167-6-CF-Pocket-Size-Pitot-Tube
- Production Capacity: www.envirotechdelhi.net
- Delivery Time: www.envirotechdelhi.co.in
- Packaging Details: www.envirotechindia.info
Yes! I am interested
Dwyer 167-6 Pocket Size Pitot Tube
REQUEST CALLBACK
-
-
-
- +3
Get Best Quote
Approx. Rs 35,000 / NumberGet Latest Price
Product BrochureProduct Details:| Model Name/Number | Dwyer 167-6 |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Diameter | 1/8" |
| Product Type | Dwyer 167-6 Pocket Size Pitot Tube |
| Tube Diameter | 1/8" |
| Brand | Dwyer USA |
| Country of Origin | Made in India |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
| Insertion Length | 6" |
| Tip | 1-1/2" |
Dwyer 167-6 Pocket Size Pitot Tube
- Dwyer Instruments 167-6
- Stainless Steel Pitot Tube 1/8" Dia., 6" Length, 1.5" Tip
- Order #: 167-6
- Mfg #: 167-6
Ideal for use with our precision manometers and air velocity gages, Dwyer Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4"diameter or as large as 36 ft. diameter. A universal model fits user supplied 3/4"schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.
Availability: Ships in 6-7 Weeks
Product Highlights
- Pocket Size Pitot Tube
- 1/8" Diameter
- 6" Insertion Length
- 1-1/2" Tip
Additional Information:
- Item Code: Dwyer-167-6-Pocket-Size-Pitot-Tube
- Production Capacity: www.envirotechindustrialproduct.info
- Delivery Time: www.envirotechindustrialproducts.info
- Packaging Details: www.envirotechdelhi.com
Yes! I am interested
Dwyer 167-12-CF Pocket Size Pitot Tube
REQUEST CALLBACK
-
-
-
- +3
Get Best Quote
Approx. Rs 35,000 / NumberGet Latest Price
Product BrochureProduct Details:| Model Name/Number | Dwyer 167-12-CF |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Diameter | 1/8" |
| Product Type | Dwyer 167-12-CF Pocket Size Pitot Tube |
| Tube Diameter | 1/8" |
| Brand | DWYER USA |
| Country of Origin | Made in India |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
| Insertion Length | 12" |
| Tip | 1-1/2" |
| NPT Compression Fitting | With 1/8" Male |
Dwyer 167-12-CF Pocket Size Pitot Tube
- Dwyer Instruments 167-12-CF
- Stainless Steel Pitot Tube 1/8" Diameter, 1/8" Male NPT
- Order #: 167-12-CF
- Mfg #: 167-12-CF
Ideal for use with our precision manometers and air velocity gages, Dwyer Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction Factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4"diameter or as large as 36 ft. diameter. A universal model fits user supplied 3/4"schedule 40 (standard) pipe in any length. Several Convenient mounting options are available for Permanent Installations.
Availability: Ships in 6-7 Weeks
Product Highlights
- Pocket Size Pitot tube
- 1/8"Diameter
- 12" Insertion Length
- 1-1/2" Tip
- with 1/8" Male NPT Compression Fitting
Additional Information:
- Item Code: Dwyer-167-12-CF-Pocket-Size-Pitot-Tube
- Production Capacity: www.envirotechindustrialproduct.net
- Delivery Time: www.envirotechindustrialproductsindia.in
- Packaging Details: www.envirotechindustrialproductsdelhi.com
Yes! I am interested
Dwyer 167-12 Pocket Size Pitot Tube
REQUEST CALLBACK
-
-
-
- +3
Get Best Quote
Approx. Rs 35,000 / NumberGet Latest Price
Product BrochureProduct Details:| Model Name/Number | Dwyer 167-12 |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Diameter | 1/8" |
| Product Type | Dwyer 167-12 Pocket Size Pitot Tube |
| Tube Diameter | 1/8" |
| Brand | DWYER USA |
| Country of Origin | Made in India |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
| Insertion Length | 12" |
| Tip | 1-1/2" |
Dwyer 167-12 Pocket Size Pitot Tube
- Dwyer Instruments 167-12
- Stainless Steel Pitot Tube 1/8" Dia., 12" Length, 1.5" Tip
- Order #: 167-12
- Mfg #: 167-12
Ideal for Use with our precision manometers and air velocity gages, Dwyer Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4"diameter or as large as 36 ft. diameter. A universal model fits user supplied 3/4"schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.
Availability: Ships in 5-7 Weeks
Product Highlights
- Pocket Size Pitot Tube
- 1/8"Diameter
- 12" Insertion Length
- 1-1/2" Tip
Additional Information:
- Item Code: Dwyer-167-12-Pocket-Size-Pitot-Tube
- Production Capacity: www.envirotechindustrialproduct.com
- Delivery Time: www.envirotechindustrialproducts.com
- Packaging Details: www.envirotechindustrialproducts.net
Yes! I am interested
Dwyer 166-6-CF Pocket Size Pitot Tube
REQUEST CALLBACK
-
-
-
- +2
Get Best Quote
Approx. Rs 35,000 / NumberGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Number |
| Model Name/Number | Dwyer 166-6-CF |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Diameter | 1/8" |
| Product Type | Dwyer 166-6-CF Pocket Size Pitot Tube |
| Tube Diameter | 1/8" |
| Brand | DWYER USA |
| Country of Origin | Made in India |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
| Insertion Length | 6'' |
| Tip | 3'' |
| NPT Compression Fitting | 1/8" Male |
Dwyer 166-6-CF Pocket Size Pitot Tube
- Dwyer Instruments 166-6-CF
- SS Pocket Size Pitot Tube,6" Insertion,3"Tip,w/1/8"NPTM
- Order #: 166-6-CF
- Mfg #: 166-6-CF
Ideal for use with our precision manometers and air velocity gages, Dwyer Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4" dia. or as large as 36 ft. dia. A universal model fits user supplied 3/4" schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.
Availability: Ships in 5-6 Weeks
Product Highlights
- No Calibration Needed
- Precisely located, burr-free static pressure holes
- Hemispherical tip design, best for accuracy if imperfectly aligned and nearly impossible to damage
- Long lasting 304 stainless steel construction
- Silver soldered connections for leak-proof operation
- ASME design meets AMCA and ASHRAE specification
- Coefficient of "1
- 5/16" models rated to 1500 F
- Extended static connection helps guide tip within recommended 15 degrees of air flow direction
- Inch graduations on sides of 160 series to Quickly determine exact insertion depth
- Dwyer Air Velocity Calculator, Direct Reading Flow Charts and Instructions Included
- Use 1/8" models in ducts as small as 4", 5/16" models in ducts 10" or larger
- Optional Mounting Gland or Split Flange Make Permanent Installation Fast and Simple
- Pocket Size Pitot Tube
- 1/8" Diameter
- 6" Insertion Length
- 3" Tip
- 1/8" Male NPT Compression Fitting
Additional Information:
- Item Code: Dwyer-166-6-CF-Pocket-Size-Pitot-Tube
- Production Capacity: www.envirotechindustrialproduct.co.in
- Delivery Time: www.envirotechindustrialproduct.in
- Packaging Details: www.envirotechindustrialproducts.in
Yes! I am interested
Dwyer 166-6 Pocket Size Pitot Tube
REQUEST CALLBACK
-
-
-
- +3
Get Best Quote
Approx. Rs 35,000 / NumberGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Number |
| Model Name/Number | Dwyer 166-6 |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Diameter | 1/8" |
| Product Type | Dwyer 166-6 Pocket Size Pitot Tube |
| Tube Diameter | 1/8" |
| Brand | DWYER USA |
| Country of Origin | Made in India |
| Product Applications | Monitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter |
| Insertion Length | 6" |
| Tip | 3" |
Dwyer 166-6 Pocket Size Pitot Tube
- Dwyer Instruments 166-6
- Pocket-Size Pitot Tube, 1/8"dia 6" Insertion Length
- Order #: 166-6
- Mfg #: 166-6
Ideal for use with our Precision Manometers and air velocity gages, Dwyer Pitot Tubes are Constructed From Corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4" dia. or as large as 36 ft. dia. A universal model fits user supplied 3/4" schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.
Availability: Ships in 5-6 Weeks
Product Highlights
- No Calibration Needed
- Precisely located, burr-free static pressure holes
- Hemispherical tip design, best for accuracy if imperfectly aligned and Nearly impossible to damage
- Long lasting 304 stainless steel construction
- Silver soldered connections for Leak-Proof Operation
- ASME design meets AMCA and ASHRAE Specification
- Coefficient of "1
- 5/16" Models Rated to 1500 F
- Extended static connection helps guide tip within recommended 15 degrees of air flow direction
- Inch graduations on sides of 160 series to quickly determine exact insertion depth
- Dwyer Air Velocity Calculator, direct reading flow charts and instructions included
- Use 1/8" Models in Ducts as Small as 4", 5/16" Models in Ducts 10" or Larger
- Optional mounting gland or split flange make permanent installation fast and simple
- Pocket Size Pitot Tube
- 1/8" Diameter
- 6" Insertion Length
- 3" Tip
Additional Information:
- Item Code: Dwyer-166-6-Pocket-Size-Pitot-Tube
- Production Capacity: http://www.envirotechdelhi.info
- Delivery Time: www.envirotechindia.net
- Packaging Details: www.envirotechindustrialproducts.co.in
Yes! I am interested
Looking for Dwyer Stainless Steel Pitot Tube Wholesalers ?
X
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
Explore More Products
Contact via E-mail
Contact via SMS
R.P Sharma (Proprietor)
Enviro Tech Industrial Products
Enviro Tech Industrial Products
Sales Office, Plot No. X/852, Chand Mohalla, Street No. 11,
Gandhi Nagar Industrial Area, Near Ramgareya Gurdwara
Delhi - 110031, India
Delhi - 110031, India
Call Us: Call Response Rate: 82%
© Enviro Tech Industrial Products. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited