POCKET FILTER MANUFACTURER DELHI

Approx. Rs 750 / NumberGet Latest Price

• Pre Filter for Air Conditioning Filtration System.
• Inlet and Outlet Air Filters Used in the General Air Filtration Sites.

• Filter Medium is the Coarse Filter Cotton with High Permeability and Low Pressure Loss.
• Filter is Flat Plate Type, Cardboard or Metal Frame and easy to be replaced.
• Consistent with the Fire classification standard DIN53438 in Europe.
• Excellent humidity resistance. 100% Relative Humidity is possible to reach.
• Temperature can be up to 80 °C.
• Dimension can be customized according to specification and requirement.

Approx. Rs 750 / NumberGet Latest Price

• Multiple Layers of Mono Filament Synthetic Woven Fabric of Suitable Mesh Size and Mono Filament Thickness stitched with an Aluminium Expanded Metal Reinforcement is used as the Filtration Media.
• In cases where necessary, Aluminium Pipes rigidly fixed to the casing with PPCP studs at each Pleat act as pleat supports.
• Pleated media for enhanced Surface area, higher dust holding, higher air handling capacity & lesser pressure drop.
• Epoxy or PU Sealants to Bond Casing to the Filtration Media.
• Water Washable (Refer "Handling and Servicing" instructions).

Approx. Rs 850 / PieceGet Latest Price

• Washable Metal Mesh Filters Are Used in Residential, Commercial, Industrial and Oem Applications.
• Metal Mesh Filters are made using an Aluminum Mesh Pad comprised of Multiple Layers of expanded Aluminum Foil that is expanded in different widths and bonded together to make a pad. The layers, being expanded at different widths, create a baffling effect as the air passes through the Filter providing Better Filtration of Airborne Particulates.
• Good Filter Company Also Adds either 1 or 2 Layers of Heavy Duty Expanded Aluminum (for Standard Duty Filters) or Galvanized Steel (For Heavy Duty Filters) to one or both sides of the filter, as well as a heavier duty aluminum frame (for Standard Duty filters) or galvanized steel frame (for Heavy Duty Filters) for added strength and durability. Galvanized steel frames and expanded Galvanized Steel (Heavy Duty Filters) should be used in unusually heavy loading or harsh conditions
• Residential Applications Include Range Hood and Under Microwave Grease Filters, Heating and Air Conditioning Primary Filters and Pre Filters For Portable and Duct Mounted Electronic Air Cleaners.
• Commercial Applications Include Make-up Air Filters in Heating and Air Conditioning Equipment, Pre-Filters for Air Cleaning Equipment, Vent Filters and Filters That will be exposed to outside weather conditions as well as other Applications where a Durable, cleanable, Reusable Filter is needed.
• Industrial Uses include the above Applications and include Air Compressor Filters, Vacuum Equipment Filters, Welding particulate control equipment, oil or water mist filters and other areas and equipment where a more Durable Filter is Required.
• OEM Applications include all the above applications. Metal Mesh Filters also make excellent electromagnetic interrupt (emi) Filters in Electronic Enclosure cabinets and other Applications Where EMI Filters are Appropriate

Approx. Rs 750 / NumberGet Latest Price

• Acts as a first stage filter offering G4 grade filtration
• Rigid, Moisture Resistant Card Frame
• Food Safe Air Filter
• Extended Surface
• Large Dust Holding Capacity
• Energy Efficient
• Available in Metal Facia Capscrap or Cardboard Lattice
• Metal Framed Pleated Panel Filter Available For High Humidity Applications.

• The Pleated Panel Air Filter is a medium efficiency disposable Air Filter, Suitable For Ventilation and Air Conditioning Systems which require a higher efficiency and greater dust holding capacity than can be achieved with glass or Synthetic Panels.
• The G4 Pleated Panel Air Filter can be used where glass panels are undesirable, such as in the Food Industry and Hospitals.
• Typically G4 Pleated Panel Air Filters are used as pre-filters on supply air systems to High Performance Bag Filters, or to protect heating or cooling coils from dust build up which leads to system inefficiency. Another common place to see a G4 Pleated Panel Air Filter is to protect fans in extract systems for office blocks or kitchen extract systems.

• Pleated Panel Filters consist of a dry non-woven fabric media which is pleated to give an extended surface area, producing a low initial resistance for the same air volume, making this an energy efficient filter.  The pleat is supported by an expanded galvanised steel mesh.

• Enviro Tech Moisture Resistant Panel Filters are for use in high humidity or moist environments. These premium filters still have a cardboard frame, but have a higher moisture resistance than our standard range, which help the filter maintain rigidity and functionality without structural failure.
• Enviro Tech Moisture Resistant Panels are Available in G2/3 Glass Fibre, G3 Synthetic and G4 Pleated Panel Filters. “Panel Filters” are Manufactured in the Same way as our standard panel filters but utilise “Carrier / Beverage Board” which has an increased Wet-Strength.

Approx. Rs 750 / NumberGet Latest Price

• Multiple Layers of Mono Filament Synthetic Woven Fabric of Suitable Mesh Size and Mono Filament Thickness stitched with an Aluminium Expanded Metal Reinforcement is used as the Filtration Media.
• In cases where necessary, Aluminium Pipes rigidly fixed to the casing with PPCP studs at each Pleat act as pleat supports.
• Pleated media for enhanced Surface area, higher dust holding, higher air handling capacity & lesser pressure drop.
• Epoxy or PU Sealants to Bond Casing to the Filtration Media.
• Water Washable (Refer "Handling and Servicing" instructions).

Approx. Rs 3,500 / NumberGet Latest Price

Features:                     

• Firm Metal Frame Structure
• High Dust Loading Capacity, Low Pressure Drop
• High Quality Multilayer Non-Woven Synthetic Fiber Filter Media
• Ultrasonic Sealed Pocket Structure
• Efficiency : G3,G4                           

Product Description:

The Extended Shape of The Filter is Specially Designed for Better and Steady Air Filtration Efficiency. The Dimensions of The Filter can be Altered based on clients’ requirements. Pocket filter is applicable to clean room system of food industry, Pharmaceutical Industry, Electronics Industry And Ventilation System of Industrial Plant as Well as Commercial Building.

Structure Description:

• Firm Metal Frame Structure . The outer frame of M???Pack is made of double layer U-shape aluminum alloy sheet. The pockets are sealed tightly by special knots in the rib supports within the frame to prevent drop off. All the metal sides are rolled inwards to prevent scratching during installation or replacement.
• High Quality Multilayer Non-Woven Synthetic Fiber Filter Media . The Media consists of 4 layers of tightly sealed non-woven synthetic fiber which have low pressure drop and high dust loading capacity. The needle-shape layer and micro-fiber layer of the media would ensure high filter efficiency.
• Ultrasonic sealed pocket structure. The three sides of pockets are ultrasonic sealed while the corner of the back empty sides are tightly sealed with glue to ensure its rigidness under harsh working environment. The pockets are supported by strengthen grids and uniformly divided into several air passages to ensure maximum expansion and uniform air flow. The pocket-shape increases the media surface area for higher dust loading capacity and lower pressure drop.

Applications :

• As a Pre-Filter in The AHU and AC Ventilation System to Prevent The Accumulation of Dust Within The System.
• As a Pre-Filter in a Huge Size Air Compressor.
• As a Pre-Filter in the AHU and AC ventilation system of a clean room to prolong the Service life of Secondary or Tertiary Filters.
• As a Main Filter in the Ventilation System of an Industrial Plant.
• As a Main filter for Big Particles Removal in the AHU or AC Ventilation System of a Building.

Available Dimensions:

• 592 MM X 592 MM X 600 MM  NO OF Pockets - 6 ( EN779 - G4 )
• 287 MM X 592 MM X 600 MM  NO OF Pockets - 3 ( EN779 - G4 )

Approx. Rs 3,500 / NumberGet Latest Price

• The ETIP F5 Medium Effciency Pocket Filter is Constructed to Withstand Extreme Humidity, High Velocities, And High Turbulence. This Makes The Filter Excellent For All Types Of Air Handling Systems.
• Self-Supported Filter Pockets Stay Rigid in The Air Stream.
• The Filter Element Contains No Metal Parts, So There Is No Risk Of Corrosion Or Punctures.
• The Polyurethane Header Gives This Filter a Leak-Proof Bonding Of Pockets To Header.
• The ETIP F5 Medium Effciency Pocket Filter is Lightweight And Easy To Handle.
• Progressively Structured Design Provides Exceptionally Low Pressure Drop At High Efficiency Levels.
• Spacers Channel The Air Entering The Pocket, Resulting in Lower Pressure Drop and Reduced Energy Costs.
• Synthetic Media Rated at ASHRAE 45-50% .
• Non-Shedding Fibers Are Specifically Designed To Prevent Moisture And Chemicals.
• Prevents Bacterial Growth.

Available Dimensions:

• 592 MM X 592 MM X 600 MM  NO OF Pockets - 6 ( EN779 - 35% )
• 290 MM X 592 MM X 600 MM  NO OF Pockets - 3 ( EN779 - 35% )
• 592 MM X 592 MM X 600 MM  NO OF Pockets - 8 ( EN779 - 35% )
• 290 MM X 592 MM X 600 MM  NO OF Pockets - 4 
• ( EN779 - 35% )

Approx. Rs 3,500 / NumberGet Latest Price

F6 Medium Effciency Pocket Filter

• Large Dust Holding Capacity 
• High Efficiency 
• Long Working Life 
• F5-F8 Efficiency 

Features:  

• Collect 1 to 5Micron particles.Between each pocket has a metal stick to make 
•  Frame more firm,and the separation material of each pocket can avoid the filter 
• over expanded under the pressure. 
•  Ultrasonic sealing make the filter more strong and not easy to broke 
• Adopt fine synthetic fiber instead of some fiberglass material 
•  Material has antistatic fiber, large dust holding capacity and long working life.
•  Pocket mesh efficiency has five different type for choice: 45%, 65%, 85%, 95%, 98%.
• Firm structure, large dust holding capacity, large air flow.
• There are F8 (yellow,90-95%), F7 (Pink,80-85%), F6 (green, 60-65%), F5 (White,45-55%) available, with aluminum alloy, stainless steel or galvanized steel frame for selection.
• Applicable in electronics, precision machinery, instruments, machinery, food and other industries and medium filtering for general air-conditioning ventilation systems.

   
Using:

• l Middle Filtration For The Air-Condition, Second-Level Filtration For The Precise Dust-Free Room,
• l Pre-Filtration For The High Efficiency Filter

Approx. Rs 3,500 / NumberGet Latest Price

F7 Medium Effciency Pocket Filter The Bag Type Filter can be used in the central Air Conditioning Ventilation System for industrial and commercial facilities, hospitals,schools,buildings and other kind of Factory's HVAC Devices. It can be used and installed at the location which is just in front of HEPA Filter so as to try to lengthen the useful life time both of HEPA Filter and the equipment as well. In addition, Bag Type Filter can be used in clean room or the other areas which need more critical cleanliness level. And it virtually works as an intermediate filter.

Features:

• F8 Medium Efficiency Pocket Air Filter is Available in Efficiencies of 90-95% on 1-5 micron particles
• Large Air Flow,Low Resistance,High Dust Holding Capacity.

Advantage:

• It is the intermediate filter which uses the least frame materials currently. And its filtration efficiency is excellent as it has a bigger filtration area.
• The frame is made of the hot dipping galvanized steel panel. And it is not to be easy to distort by the way of the special intensity processing.
• There are variable filtration efficiencies available, such as 60-65%,80-85%,90-95% etc. so as to meet a wide variety of requirements.

Premeters:

Approx. Rs 3,500 / NumberGet Latest Price

Medium Synthetic Pocket Filter The Bag Type Filter can be used in the Central Air Conditioning ventilation system for industrial and commercial Facilities, Hospitals, Schools, buildings and other kind of factory’s HVAC Devices. It can be used and installed at the location which is just in front of HEPA Filter so as to try to lengthen the useful life time both of HEPA Filter and the equipment as well. In addition, bag type filter can be used in clean room or the other areas which need more critical cleanliness level. And it virtually works as an intermediate Filter.

Approx. Rs 3,500 / NumberGet Latest Price

F8 Medium Efficiency Pocket Filter

Features:

• Large Dust Holding Capacity 
• High Efficiency
• Good Air Permeability
• Long Working Life 

Application:

• The Air Pre-Filtration System For Non-Dust Room, Hospital, Pharmaceutical Factory, Electronics Factory, Spray Booth And Other Filtration Systems Which Are In High Need Of Clean Air. 
• Between Each Pocket There is a Metal Stick to Make Frame Firm, and the separation material of each pocket can avoid the filter over expanded under the pressure.
• Ultrasonic sealing make the filter more strong and not easy to break.
• Adopted fine synthetic fiber instead of some fiberglass material.
• Material is Made of Antistatic Fiber, Large Dust Holding Capacity and Long Working ife.

Normal Size:

• 592 MM X 592 MM X 600 MM  NO OF Pockets - 6 ( EN779 - 85% )
• 290 MM X 592 MM X 600 MM  NO OF Pockets - 3 ( EN779 - 85% )
• 592 MM X 592 MM X 600 MM  NO OF Pockets - 8 ( EN779 - 85% )
• 290 MM X 592 MM X 600 MM  NO OF Pockets - 4 
• ( EN779 - 85% 

Approx. Rs 3,500 / NumberGet Latest Price

F9 Medium Effciency Pocket Filter

• The ETIP F9 Medium Effciency Pocket Filter is Constructed to Withstand Extreme Humidity, High Velocities, And High Turbulence. This Makes The Filter Excellent For All Types Of Air Handling Systems.
• Self-Supported Filter Pockets Stay Rigid in The Air Stream.
• The Filter Element Contains No Metal Parts, So There Is No Risk Of Corrosion Or Punctures.
• The Polyurethane Header Gives This Filter a Leak-Proof Bonding Of Pockets To Header.
• The ETIP F9 Medium Effciency Pocket Filter is Lightweight And Easy To Handle.
• Progressively Structured Design Provides Exceptionally Low Pressure Drop At High Efficiency Levels.
• Spacers Channel The Air Entering The Pocket, Resulting in Lower Pressure Drop and Reduced Energy Costs.
• Synthetic Media Rated at ASHRAE 95% Non-Shedding Fibers Are Specifically Designed To Prevent Moisture And Chemicals.
• Prevents Bacterial Growth.

Dimensions:

• 592 MM X 592 MM X 600 MM  NO OF Pockets - 6 ( EN779 - 95% )
• 290 MM X 592 MM X 600 MM  NO OF Pockets - 3 ( EN779 - 95% )
• 592 MM X 592 MM X 600 MM  NO OF Pockets - 8 ( EN779 - 95% )
• 290 MM X 592 MM X 600 MM  NO OF Pockets - 4 ( EN779 - 95% )

Additional Information:

• Item Code: F9-Medium-Effciency-Pocket-Filter
• Production Capacity: www.envirotechindustrialproducts.co.in
• Delivery Time: www.envirotechindustrialproduct.co.in
• Packaging Details: www.envirotechindustrialproduct.in