Send Email
0794935689184% Response Rate
Search
SENSOCON Differential Pressure Gauge Wholesaler Delhi India
SENSOCON Differential Pressure Gauge Wholesaler Delhi India.- Sensocon S2000-1kpa Magnehelic Differential Pressure Gauge.
- Sensocon S2000-750 Pac Magnehelic Gauge.
- Sensocon Instruments S2000-1KPA.
- Sensocon S2000-750 Pac Magnehelic Differential Pressure Gauge.
- SENSOCON Instruments S2000-750 PAC.
- Sensocon S2000-750 Pac Differential Pressure Gauge.
- SENSOCON S2000-1KPA Magnehelic Gauge.
- SENSOCON S2000-1KPA Differential Pressure Gauge.
Sensocon S2000-750 Pac Magnehelic Gauge
REQUEST CALLBACK
-
-
-
- +1
Get Best Quote
Approx. Rs 4,800 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 10 Piece |
| Dial Size | 4 inch / 100 mm |
| Pressure Range | MM WC,PAC,KPA,INCH,CM,PSI |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | Sensocon USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Mounting | Back |
| Model Name/Number | Sensocon S2000-750 Pac Magnehelic Gauge |
| Weight | 650 G |
| Country of Origin | Made in India |
Sensocon S2000-750 Pac Magnehelic Gauge
- Magnehelic Press.Gage,0-750pa
- Order: S2000-750PA
- Mfg: S2000-750PA
Select The Magnehelic Gage For High Accuracy Guaranteed Within 2% of Full Scale And For The Wide Choice of 81 Models Available to suit your needs precisely.Using SENSOCON Simple,Frictionless Magnehelic Gage movement,It quickly indicates low Air or Non-corrosive gas pressures-Either positive,Negative Vacuum or Differential.The design resists shock,Vibration and over-pressures. No manometer Fluid to evaporate,Freeze or cause toxic or leveling problems.It's inexpensive,Too.The Magnehelic gage is the industry standard to measure fan and blower pressures,Filter resistance,Air velocity,furnace draft, pressure drop across orifice plates,Liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems.It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment
Product Highlights
- Bezel provides Flange for Flush mounting in panel.
- Clear plastic face is highly resistant to breakage.Provides Undistorted viewing of pointer and scale.
- Precision litho-printed scale is accurate and easy to read.
- Red tipped pointer of heat treated aluminum tubing is easy to see.It is rigidly mounted on the helix shaft.
- Pointer stops of molded rubber prevent pointer over-travel without damage.
- "Wishbone" assembly provides mounting for helix,Helix bearings and pointer shaft.
- Jeweled bearings are shock-resistant mounted;Provide virtually friction-free motion for helix.Motion damped with high viscosity silicone fluid.
- Zero adjustment screw is conveniently located in the plastic cover,And is accessible without removing the cover.O-ring seal provides pressure tightness.
- Helix is precision made from an alloy of high magnetic permeability.Mounted in jeweled bearings,It turns freely, following the magnetic field to move the Pointer Across The Scale
- Calibrated range spring is flat spring steel.Small amplitude of motion assures consistency and long life.It reacts to pressure on diaphragm.Live length adjustable for Calibration
- Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates.It is locked and sealed in position with a sealing plate and retaining ring.Diaphragm motion is restricted to prevent damage due to overpressures.
- Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion Test
- Exterior finished in baked dark gray hammerloid.One case size is used for all standard pressure options, and for both surface and Flush mounting
Overpressure Protection
Blowout plug is comprised of a Rubber plug on The Rear which functions as a relief valve by unseating and venting the Gage interior when over pressure reaches approximately 25 PSIG 1.7 bar.To provide a free path for pressure relief,There are four spacer pads which maintain 0.023" Clearance when gage is surface mounted. Do not obstruct the gap created by these pads.The blowout plug is not used on models above 180" of water pressure,Medium or high pressure models,or on gages which require an elastomer other than silicone for the diaphragm.The Blowout Plug should not be used as a system overpressure control.High supply pressures may still cause the gage to fail due to over pressurization,Resulting in property damage or serious injury.Good engineering practices should be utilized to prevent your system from exceeding the ratings or any component
O-Ring Seal for cover assures pressure integrity of case.Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages
- Range 0-750 Pa
- Minor Divisions 25.0
Additional Information:
- Item Code: Sensocon-S2000-750-Pac-Magnehelic-Gauge
- Production Capacity: www.envirotechindustrialproduct.com
- Delivery Time: www.envirotechindustrialproducts.com
- Packaging Details: www.envirotechindustrialproducts.net
Yes! I am interested
Sensocon S2000-1kpa Magnehelic Differential Pressure Gauge
REQUEST CALLBACK
Get Best Quote
Approx. Rs 4,800 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 24 Piece |
| Dial Size | 4 inch / 100 mm |
| Pressure Range | MM WC,PAC,KPA,INCH,CM,PSI |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | Sensocon USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Mounting | Back |
| Model Name/Number | Sensocon S2000-1kpa |
| Weight | 650 G |
| Country of Origin | Made in India |
Sensocon S2000-1kpa Magnehelic Differential Pressure Gauge
- Magnehelic Press.Gage,0-1Kpa
- Order: S2000-1KPA
- Mfg: S2000-1KPA
Select The Magnehelic Gage For High Accuracy Guaranteed Within 2% of Full Scale And For The Wide Choice of 81 Models Available to suit your needs precisely.Using SENSOCON Simple,Frictionless Magnehelic Gage movement,It quickly indicates low Air or Non-corrosive gas pressures-Either positive,Negative Vacuum or Differential.The design resists shock,Vibration and over-pressures.No manometer Fluid to evaporate,Freeze or cause toxic or leveling problems.It's inexpensive,Too.The Magnehelic gage is the industry standard to measure fan and blower pressures,Filter resistance,Air velocity,furnace draft, pressure drop across orifice plates,Liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems.It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment
Product Highlights
- Bezel provides Flange for Flush mounting in panel
- Clear plastic face is highly resistant to breakage.Provides Undistorted viewing of pointer and scale
- Precision litho-printed scale is accurate and easy to read
- Red tipped pointer of heat treated aluminum tubing is easy to see.It is rigidly mounted on the helix shaft
- Pointer stops of molded rubber prevent pointer over-travel without damage.
- "Wishbone" assembly provides mounting for helix,Helix bearings and pointer shaft.
- Jeweled bearings are shock-resistant mounted;Provide virtually friction-free motion for helix.Motion damped with high viscosity silicone fluid.
- Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover.O-ring seal provides pressure tightness.
- Helix is precision made from an alloy of high magnetic permeability.Mounted in jeweled bearings,It turns freely, following the magnetic field to move the Pointer Across The Scale
- Calibrated range spring is flat spring steel.Small amplitude of motion assures consistency and long life.It reacts to pressure on diaphragm.Live length adjustable for Calibration
- Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates.It is locked and sealed in position with a sealing plate and retaining ring.Diaphragm motion is restricted to prevent damage due to overpressures.
- Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion Test
- Exterior finished in baked dark gray hammerloid.One case size is used for all standard pressure options, and for both surface and Flush mounting
Overpressure Protection
Blowout plug is comprised of a Rubber plug on The Rear which functions as a relief valve by unseating and venting the Gage interior when over pressure reaches approximately 25 PSIG 1.7 bar.To provide a free path for pressure relief,There are four spacer pads which maintain 0.023" Clearance when gage is surface mounted. Do not obstruct the gap created by these pads.The blowout plug is not used on models above 180" of water pressure,Medium or high pressure models,or on gages which require an elastomer other than silicone for the diaphragm.The Blowout Plug should not be used as a system overpressure control.High supply pressures may still cause the gage to fail due to over pressurization,Resulting in property damage or serious injury.Good engineering practices should be utilized to prevent your system from exceeding the ratings or any component
O-Ring Seal for cover assures pressure integrity of case.Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages
- Range 0-1 KPA
- Minor Divisions .02
Additional Information:
- Item Code: Sensocon-S2000-1kpa
- Production Capacity: www.envirotechindustrialproducts.co.in
- Delivery Time: www.envirotechindustrialproduct.co.in
- Packaging Details: www.envirotechindustrialproduct.in
Yes! I am interested
Sensocon S2000-750 Pac Magnehelic Differential Pressure Gauge
REQUEST CALLBACK
-
-
-
- +1
Get Best Quote
Approx. Rs 4,800 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 12 Piece |
| Brand | Sensocon USA |
| Pressure Range | MM WC,PAC,KPA,INCH,CM,PSI |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Dial Size | 4 inch / 100 mm |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Pressure Type | Differential Pressure |
| Model Name/Number | Sensocon S2000-750 Pac |
| Weight | 650 G |
| Country of Origin | Made in India |
Sensocon S2000-750 Pac Magnehelic Differential Pressure Gauge
- Sensocon Instruments S2000-750PA
- Magnehelic Press.Gage,0-750pa
- Order #: S2000-750PA
- Mfg #: S2000-750PA
Select the Magnehelic Gage for High Accuracy--Guaranteed Within 2% of Full Scale--and for the wide choice of 81 Models Available to suit your needs precisely. Using Sensocon simple, frictionless Magnehelic Gage Movement, it quickly indicates low air or non-corrosive Gas pressures--either Positive, negative (vacuum) or Differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too. The Magnehelic Gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in Medical care Equipment.
Product Highlights
Bezel provides flange for flush mounting in panel.Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.Precision litho-printed scale is accurate and easy to read.Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.Pointer stops of molded rubber prevent pointer over-travel without damage."Wishbone" assembly provides mounting for helix, helix bearings and pointer shaft.Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test.Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.
Overpressure Protection
Blowout plug is comprised of a Rubber plug on the Rear which functions as a relief valve by unseating and venting the gage interior when over pressure reaches approximately 25 PSIg (1.7 bar). To provide a free path for pressure relief, there are four spacer pads which maintain 0.023" clearance when gage is surface mounted. Do not obstruct the gap created by these pads. The blowout plug is not used on models above 180" of water pressure, medium or high pressure models, or on gages which require an elastomer other than silicone for the diaphragm. The blowout plug should not be used as a system overpressure control. High supply pressures may still cause the gage to fail due to over pressurization, resulting in property damage or serious injury. Good engineering practices should be utilized to prevent your system from exceeding the ratings or any component.
O-Ring Seal for cover assures pressure integrity of case. Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.
- Range 0-750 Pa
- Minor Divisions 25.0
Additional Information:
- Item Code: Sensocon-USA-S2000-750-Pac
- Production Capacity: www.envirotechindia.net
- Delivery Time: www.envirotechdelhi.co.in
- Packaging Details: www.envirotechindustrialproducts.co.in
Yes! I am interested
Sensocon Instruments S2000-1KPA
REQUEST CALLBACK
-
-
-
- +9
Get Best Quote
Approx. Rs 5,200 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 24 Piece |
| Country of Origin | Made in India |
| Dial Size | 4 inch / 100 mm |
| Brand | Sensocon USA |
| Pressure Range | MM WC,PAC,KPA,INCH,CM,PSI |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Mounting | Back |
| Model Name/Number | Sensocon S2000-1kpa |
| Weight | 650 G |
Sensocon Instruments S2000-1KPA
- Magnehelic Press.Gage,0-1Kpa
- Order: S2000-1KPA
- Mfg: S2000-1KPA
Select The Magnehelic Gage For High Accuracy Guaranteed Within 2% of Full Scale And For The Wide Choice of 81 Models Available to suit your needs precisely.Using SENSOCON Simple,Frictionless Magnehelic Gage movement,It quickly indicates low Air or Non-corrosive gas pressures-Either positive,Negative Vacuum or Differential.The design resists shock,Vibration and over-pressures.No manometer Fluid to evaporate,Freeze or cause toxic or leveling problems.It's inexpensive,Too.The Magnehelic gage is the industry standard to measure fan and blower pressures,Filter resistance,Air velocity,furnace draft, pressure drop across orifice plates,Liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems.It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment
Product Highlights
- Bezel provides Flange for Flush mounting in panel
- Clear plastic face is highly resistant to breakage.Provides Undistorted viewing of pointer and scale
- Precision litho-printed scale is accurate and easy to read
- Red tipped pointer of heat treated aluminum tubing is easy to see.It is rigidly mounted on the helix shaft
- Pointer stops of molded rubber prevent pointer over-travel without damage.
- "Wishbone" assembly provides mounting for helix,Helix bearings and pointer shaft.
- Jeweled bearings are shock-resistant mounted;Provide virtually friction-free motion for helix.Motion damped with high viscosity silicone fluid.
- Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover.O-ring seal provides pressure tightness.
- Helix is precision made from an alloy of high magnetic permeability.Mounted in jeweled bearings,It turns freely, following the magnetic field to move the Pointer Across The Scale
- Calibrated range spring is flat spring steel.Small amplitude of motion assures consistency and long life.It reacts to pressure on diaphragm.Live length adjustable for Calibration
- Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates.It is locked and sealed in position with a sealing plate and retaining ring.Diaphragm motion is restricted to prevent damage due to overpressures.
- Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion Test
- Exterior finished in baked dark gray hammerloid.One case size is used for all standard pressure options, and for both surface and Flush mounting
Overpressure Protection
Blowout plug is comprised of a Rubber plug on The Rear which functions as a relief valve by unseating and venting the Gage interior when over pressure reaches approximately 25 PSIG 1.7 bar.To provide a free path for pressure relief,There are four spacer pads which maintain 0.023" Clearance when gage is surface mounted. Do not obstruct the gap created by these pads.The blowout plug is not used on models above 180" of water pressure,Medium or high pressure models,or on gages which require an elastomer other than silicone for the diaphragm.The Blowout Plug should not be used as a system overpressure control.High supply pressures may still cause the gage to fail due to over pressurization,Resulting in property damage or serious injury.Good engineering practices should be utilized to prevent your system from exceeding the ratings or any component
O-Ring Seal for cover assures pressure integrity of case.Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages
- Range 0-1 KPA
- Minor Divisions .02
Additional Information:
- Item Code: Sensocon-Instruments-S2000-1KPA
- Production Capacity: www.envirotechindustrialproducts.in
- Delivery Time: www.envirotechindustrialproduct.com
- Packaging Details: www.envirotechindustrialproducts.com
Yes! I am interested
SENSOCON Instruments S2000-750 PAC
REQUEST CALLBACK
-
-
-
- +1
Get Best Quote
Approx. Rs 4,800 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 10 Piece |
| Brand | SENSOCON USA |
| Pressure Range | MM WC,PAC,KPA,INCH,CM,PSI |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Dial Size | 4 inch / 100 mm |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Mounting | Back |
| Model Name/Number | SENSOCON Instruments S2000-750 PAC |
| Pointer Material | Aluminium Black |
| Weight | 650 G |
| Window Material | Acrylic |
| Country of Origin | Made in India |
SENSOCON Instruments S2000-750 PAC
- Magnehelic Press.Gage,0-750pa
- Order: S2000-750PA
- Mfg: S2000-750PA
Select The Magnehelic Gage For High Accuracy Guaranteed Within 2% of Full Scale And For The Wide Choice of 81 Models Available to suit your needs precisely.Using SENSOCON Simple,Frictionless Magnehelic Gage movement,It quickly indicates low Air or Non-corrosive gas pressures-Either positive,Negative Vacuum or Differential.The design resists shock,Vibration and over-pressures. No manometer Fluid to evaporate,Freeze or cause toxic or leveling problems.It's inexpensive,Too.The Magnehelic gage is the industry standard to measure fan and blower pressures,Filter resistance,Air velocity,furnace draft, pressure drop across orifice plates,Liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems.It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment
Product Highlights
- Bezel provides Flange for Flush mounting in panel.
- Clear plastic face is highly resistant to breakage.Provides Undistorted viewing of pointer and scale.
- Precision litho-printed scale is accurate and easy to read.
- Red tipped pointer of heat treated aluminum tubing is easy to see.It is rigidly mounted on the helix shaft.
- Pointer stops of molded rubber prevent pointer over-travel without damage.
- "Wishbone" assembly provides mounting for helix,Helix bearings and pointer shaft.
- Jeweled bearings are shock-resistant mounted;Provide virtually friction-free motion for helix.Motion damped with high viscosity silicone fluid.
- Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover.O-ring seal provides pressure tightness.
- Helix is precision made from an alloy of high magnetic permeability.Mounted in jeweled bearings,It turns freely, following the magnetic field to move the Pointer Across The Scale
- Calibrated range spring is flat spring steel.Small amplitude of motion assures consistency and long life.It reacts to pressure on diaphragm.Live length adjustable for Calibration
- Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates.It is locked and sealed in position with a sealing plate and retaining ring.Diaphragm motion is restricted to prevent damage due to overpressures.
- Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion Test
- Exterior finished in baked dark gray hammerloid.One case size is used for all standard pressure options, and for both surface and Flush mounting
Overpressure Protection
Blowout plug is comprised of a Rubber plug on The Rear which functions as a relief valve by unseating and venting the Gage interior when over pressure reaches approximately 25 PSIG 1.7 bar.To provide a free path for pressure relief,There are four spacer pads which maintain 0.023" Clearance when gage is surface mounted. Do not obstruct the gap created by these pads.The blowout plug is not used on models above 180" of water pressure,Medium or high pressure models,or on gages which require an elastomer other than silicone for the diaphragm.The Blowout Plug should not be used as a system overpressure control.High supply pressures may still cause the gage to fail due to over pressurization,Resulting in property damage or serious injury.Good engineering practices should be utilized to prevent your system from exceeding the ratings or any component
O-Ring Seal for cover assures pressure integrity of case.Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages
- Range 0-750 Pa
- Minor Divisions 25.0
Additional Information:
- Item Code: SENSOCON-Instruments-S2000-750-PAC
- Production Capacity: www.envirotechindustrialproduct.co.in
- Delivery Time: www.envirotechindustrialproduct.in
- Packaging Details: www.envirotechindustrialproducts.in
Yes! I am interested
Sensocon S2000-750 Pac Differential Pressure Gauge
REQUEST CALLBACK
-
-
-
- +1
Get Best Quote
Approx. Rs 4,800 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 12 Piece |
| Brand | SENSOCON USA |
| Pressure Range | MM WC,PAC,KPA,INCH,CM,PSI |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Dial Size | 4 inch / 100 mm |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Pressure Type | Differential Pressure |
| Mounting | Back |
| Model Name/Number | Sensocon S2000-750 Pac Differential Pressure Gauge |
| Weight | 650 G |
| Window Material | Acrylic |
| Country of Origin | Made in India |
Sensocon S2000-750 Pac Differential Pressure Gauge
- Magnehelic Press.Gage,0-750pa
- Order:S2000-750PA
- Mfg:S2000-750PA
Select The Magnehelic Gage For High Accuracy Guaranteed Within 2% of Full Scale And For The Wide Choice of 81 Models Available to suit your needs precisely.Using SENSOCON Simple,Frictionless Magnehelic Gage movement,It quickly indicates low Air or Non-corrosive gas pressures-Either positive,Negative Vacuum or Differential.The design resists shock,Vibration and over-pressures.No manometer Fluid to evaporate,Freeze or cause toxic or leveling problems.It's inexpensive,Too.The Magnehelic gage is the industry standard to measure fan and blower pressures,Filter resistance,Air velocity,furnace draft, pressure drop across orifice plates,Liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems.It also checks gas-air ratio controls and automatic valves,And monitors blood and respiratory pressures in medical care equipment
Product Highlights
- Bezel provides Flange for Flush mounting in panel.
- Clear plastic face is highly resistant to breakage.Provides Undistorted viewing of pointer and scale
- Precision litho-printed scale is accurate and easy to read
- Red tipped pointer of heat treated aluminum tubing is easy to see.It is rigidly mounted on the helix shaft
- Pointer stops of molded rubber prevent pointer over-travel without damage
- "Wishbone" assembly provides mounting for helix,Helix bearings and pointer shaft
- Jeweled bearings are shock-resistant mounted;Provide virtually friction-free motion for helix.Motion damped with high viscosity silicone fluid.
- Zero adjustment screw is conveniently located in the plastic cover,and is accessible without removing the cover.O-ring seal provides pressure tightness.
- Helix is precision made from an alloy of high magnetic permeability.Mounted in jeweled bearings,It turns freely, following the magnetic field to move the Pointer Across The Scale
- Calibrated range spring is flat spring steel.Small amplitude of motion assures consistency and long life.It reacts to pressure on diaphragm.Live length adjustable for Calibration
- Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates.It is locked and sealed in position with a sealing plate and retaining ring.Diaphragm motion is restricted to prevent damage due to overpressures.
- Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion Test
- Exterior finished in baked dark gray hammerloid.One case size is used for all standard pressure options, and for both surface and Flush mounting
Overpressure Protection
Blowout plug is comprised of a Rubber plug on The Rear which functions as a relief valve by unseating and venting the Gage interior when over pressure reaches approximately 25 PSIG 1.7 bar.To provide a free path for pressure relief,There are four spacer pads which maintain 0.023" Clearance when gage is surface mounted. Do not obstruct the gap created by these pads.The blowout plug is not used on models above 180" of water pressure,Medium or high pressure models,or on gages which require an elastomer other than silicone for the diaphragm.The Blowout Plug should not be used as a system overpressure control.High supply pressures may still cause the gage to fail due to over pressurization,Resulting in property damage or serious injury.Good engineering practices should be utilized to prevent your system from exceeding the ratings or any component
O-Ring Seal for cover assures pressure integrity of case.Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages
- Range 0-750 Pa
- Minor Divisions 25.0
Additional Information:
- Item Code: Sensocon-S2000-750-Pac-Differential-Pressure-Gauge
- Production Capacity: www.envirotechindustrialproduct.net
- Delivery Time: www.envirotechindustrialproductsindia.in
- Packaging Details: www.envirotechindustrialproductsdelhi.com
Yes! I am interested
SENSOCON S2000-1KPA Magnehelic Gauge
REQUEST CALLBACK
Get Best Quote
Approx. Rs 4,800 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 24 Piece |
| Brand | SENSOCON USA |
| Pressure Range | MM WC,PAC,KPA,INCH,CM,PSI |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Dial Size | 4 inch / 100 mm |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Pressure Type | Differential Pressure |
| Mounting | Back |
| Model Name/Number | SENSOCON S2000-1KPA Magnehelic Gauge |
| Weight | 650 G |
| Window Material | Acrylic |
| Country of Origin | Made in India |
SENSOCON S2000-1KPA Magnehelic Gauge
- Magnehelic Press.Gage,0-1Kpa
- Order: S2000-1KPA
- Mfg: S2000-1KPA
Select The Magnehelic Gage For High Accuracy Guaranteed Within 2% of Full Scale And For The Wide Choice of 81 Models Available to suit your needs precisely.Using SENSOCON Simple,Frictionless Magnehelic Gage movement,It quickly indicates low Air or Non-corrosive gas pressures-Either positive,Negative Vacuum or Differential.The design resists shock,Vibration and over-pressures.No manometer Fluid to evaporate,Freeze or cause toxic or leveling problems.It's inexpensive,Too.The Magnehelic gage is the industry standard to measure fan and blower pressures,Filter resistance,Air velocity,furnace draft, pressure drop across orifice plates,Liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems.It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment
Product Highlights
- Bezel provides Flange for Flush mounting in panel
- Clear plastic face is highly resistant to breakage.Provides Undistorted viewing of pointer and scale
- Precision litho-printed scale is accurate and easy to read
- Red tipped pointer of heat treated aluminum tubing is easy to see.It is rigidly mounted on the helix shaft
- Pointer stops of molded rubber prevent pointer over-travel without damage.
- "Wishbone" assembly provides mounting for helix,Helix bearings and pointer shaft.
- Jeweled bearings are shock-resistant mounted;Provide virtually friction-free motion for helix.Motion damped with high viscosity silicone fluid.
- Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover.O-ring seal provides pressure tightness.
- Helix is precision made from an alloy of high magnetic permeability.Mounted in jeweled bearings,It turns freely, following the magnetic field to move the Pointer Across The Scale
- Calibrated range spring is flat spring steel.Small amplitude of motion assures consistency and long life.It reacts to pressure on diaphragm.Live length adjustable for Calibration
- Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates.It is locked and sealed in position with a sealing plate and retaining ring.Diaphragm motion is restricted to prevent damage due to overpressures.
- Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion Test
- Exterior finished in baked dark gray hammerloid.One case size is used for all standard pressure options, and for both surface and Flush mounting
Overpressure Protection
Blowout plug is comprised of a Rubber plug on The Rear which functions as a relief valve by unseating and venting the Gage interior when over pressure reaches approximately 25 PSIG 1.7 bar.To provide a free path for pressure relief,There are four spacer pads which maintain 0.023" Clearance when gage is surface mounted. Do not obstruct the gap created by these pads.The blowout plug is not used on models above 180" of water pressure,Medium or high pressure models,or on gages which require an elastomer other than silicone for the diaphragm.The Blowout Plug should not be used as a system overpressure control.High supply pressures may still cause the gage to fail due to over pressurization,Resulting in property damage or serious injury.Good engineering practices should be utilized to prevent your system from exceeding the ratings or any component
O-Ring Seal for cover assures pressure integrity of case.Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages
- Range 0-1 KPA
- Minor Divisions .02
Additional Information:
- Item Code: SENSOCON-S2000-1KPA-Magnehelic-Gauge
- Production Capacity: www.envirotechindustrialproducts.net
- Delivery Time: www.envirotechindustrialproduct.net
- Packaging Details: www.envirotechindustrialproductsindia.in
Yes! I am interested
SENSOCON S2000-1KPA Differential Pressure Gauge
REQUEST CALLBACK
Get Best Quote
Approx. Rs 4,800 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 24 Piece |
| Brand | SENSOCON USA |
| Pressure Range | MM WC,PAC,KPA,INCH,CM,PSI |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Dial Size | 4 inch / 100 mm |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Pressure Type | Differential Pressure |
| Mounting | Back |
| Model Name/Number | SENSOCON S2000-1KPA Differential Pressure Gauge |
| Weight | 650 G |
| Window Material | Acrylic |
| Country of Origin | Made in India |
SENSOCON S2000-1KPA Differential Pressure Gauge
- Magnehelic Press.Gage,0-1Kpa
- Order: S2000-1KPA
- Mfg: S2000-1KPA
Select The Magnehelic Gage For High Accuracy Guaranteed Within 2% of Full Scale And For The Wide Choice of 81 Models Available to suit your needs precisely.Using SENSOCON Simple,Frictionless Magnehelic Gage movement,It quickly indicates low Air or Non-corrosive gas pressures-Either positive,Negative Vacuum or Differential.The design resists shock,Vibration and over-pressures.No manometer Fluid to evaporate,Freeze or cause toxic or leveling problems.It's inexpensive,Too.The Magnehelic Gage is the industry standard to measure fan and blower pressures,Filter resistance,Air velocity,furnace draft, pressure drop across orifice plates,Liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems.It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment
Product Highlights
- Bezel provides Flange for Flush mounting in panel
- Clear plastic face is highly resistant to breakage.Provides Undistorted viewing of pointer and scale
- Precision litho-printed scale is accurate and easy to read
- Red tipped pointer of heat treated aluminum tubing is easy to see.It is rigidly mounted on the helix shaft
- Pointer stops of molded rubber prevent pointer over-travel without damage.
- "Wishbone" assembly provides mounting for helix,Helix bearings and pointer shaft.
- Jeweled bearings are shock-resistant mounted;Provide virtually friction-free motion for helix.Motion damped with high viscosity silicone fluid.
- Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover.O-ring seal provides pressure tightness.
- Helix is precision made from an alloy of high magnetic permeability.Mounted in jeweled bearings,It turns freely, following the magnetic field to move the Pointer Across The Scale
- Calibrated range spring is flat spring steel.Small amplitude of motion assures consistency and long life.It reacts to pressure on diaphragm.Live length adjustable for Calibration
- Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates.It is locked and sealed in position with a sealing plate and retaining ring.Diaphragm motion is restricted to prevent damage due to overpressures.
- Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion Test
- Exterior finished in baked dark gray hammerloid.One case size is used for all standard pressure options, and for both surface and Flush mounting
Overpressure Protection
Blowout plug is comprised of a Rubber plug on The Rear which functions as a relief valve by unseating and venting the Gage interior when over pressure reaches approximately 25 PSIG 1.7 bar.To provide a free path for pressure relief,There are four spacer pads which maintain 0.023" Clearance when gage is surface mounted. Do not obstruct the gap created by these pads.The blowout plug is not used on models above 180" of water pressure,Medium or high pressure models,or on gages which require an elastomer other than silicone for the diaphragm.The Blowout Plug should not be used as a system overpressure control.High supply pressures may still cause the gage to fail due to over pressurization,Resulting in property damage or serious injury.Good engineering practices should be utilized to prevent your system from exceeding the ratings or any component
O-Ring Seal for cover assures pressure integrity of case.Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages
- Range 0-1 KPA
- Minor Divisions .02
Additional Information:
- Item Code: SENSOCON-S2000-1KPA-Differential-Pressure-Gauge
- Production Capacity: www.envirotechindustrialproductsdelhi.com
- Delivery Time: www.envirotechindustrialproduct.info
- Packaging Details: www.envirotechindustrialproducts.info
Yes! I am interested
SENSOCON Differential Pressure Gauge In Sangli Maharashtra
REQUEST CALLBACK
-
-
-
- +7
Get Best Quote
Approx. Rs 4,500 / PieceGet Latest Price
Product Details:| Brand | SENSOCON |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Dial Size | 4 inch / 100 mm |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Pressure Type | Differential Pressure |
Yes! I am interested
Sensocon Differential Pressure Gauge
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Sensocon Differential Pressure Gauge From Lakhanpur Industrial Area West Bengal
SPECIFICATION
- Ambient Temperature - -21 ~140 -6 ~60
- Rated Pressure -20 inHg~30 inHg (-68~103KPa)
- Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
- Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
- Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
- Accuracy - ±2% of full span at 70 (21 (±3% on -0, and ±4% on -00)
- Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.
FEATURES
- OEM/ODM
- There Is No Need To Fill Liquid To Gauge.
- The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
- It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
- To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
- Exact And Stable Fixed Position Of Needle.
- The Gauge Has Great Antiknock Characteristics.
- There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa
PRODUCT APPLICATIONS
- Filter Monitoring
- Air Velocity With Pitot Tube
- Blower Vacuum Monitoring
- Fan Pressure Indication
- Duct,Room or Building Pressures
- Clean Room Positive Pressure Indication
MODELS & ORDERING
Sensocon By Model Number Popularity
- FILTER BY
- Range - MM Of Water
| Model | Description |
|---|---|
| S2000-100MM | DPG,Range 0-100 MM W.C., Minor Divisions 2.0. |
| S2000-10MM | DPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position. |
| S2000-150MM | DPG,Range 0-150 MM W.C. |
| S2000-15MM | DPG,Range 0-15 MM W.C. |
| S2000-200MM | DPG,Range 0-200 MM W.C. |
| S2000-250MM | DPG,Range 0-250 MM W.C. |
| S2000-25MM | DPG,Range 0-25 MM W.C. Minor Divisions .50. |
| S2000-300MM | DPG,Range 0-300 MM W.C. |
| S2000-50MM | DPG,Range 0-50 MM W.C., Minor Divisions 1.0. |
| S2000-6MM | DPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position. |
| S2000-80MM | DPG,Range 0-80 MM W.C., Minor Divisions 2.0. |
Additional Information:
- Item Code: Sensocon-DPG-From-Lakhanpur-Industrial-Area-West-Bengal
Yes! I am interested
Looking for SENSOCON Differential Pressure Gauge Wholesaler Delhi India ?
X
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- Series 2000 DWYER MAGNEHELIC Differential Pressure Gauges Wholesalers Gurgaon Ballabgarh Bahadurgarh
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
Explore More Products
Contact via E-mail
Contact via SMS
RP SHARMA (Proprietor)
Enviro Tech Industrial Products
Enviro Tech Industrial Products
X-852, Gali No.11,Gandhi, Nagar
New Delhi - 110031, Delhi, India
New Delhi - 110031, Delhi, India
Call Us: Call Response Rate: 84%
© Enviro Tech Industrial Products. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited