SENSOCON SERIES G2000 DIFFERENTIAL PRESSURE GAUGE MM OF WATER

Approx. Rs 4,500 / PieceGet Latest Price

Product BrochureProduct Details:

Bezel provides flange for flush mounting in panel. Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.

Sensocon 2000-80mm Differential Pressure Gauge0-80 Mm

• Precision litho-printed scale is accurate and easy to read.
• Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.
• Pointer stops of molded rubber prevent pointer over-travel without damage.
• "Wishbone" assembly provides mounting for helix, helix bearings and pointer shaft.
• Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.
• Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.
• Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.
• Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.
• Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.
• Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.
• Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.
• Blowout plug of silicone rubber protects against overpressure on 15 psig rated models. Opens at approximately 25 psig.
• O-ring seal for cover assures pressure integrity of case.

 

Approx. Rs 4,500 / PieceGet Latest Price

Product BrochureProduct Details:

Sensocon USA Differential Pressure Gauge 0 To 150 Mm Wc 

Includes:

• Two 1/8" NPT plugs, two 1/8" rubber tubing adapters, and three mounting adapters with screws

More About This Item:

• The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge's motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
• The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.

Approx. Rs 4,500 / PieceGet Latest Price

Product BrochureProduct Details:

The Series S2000 and P2000 differential pressure gauges are low-cost, diaphragm
operated, mechanical pressure gauges. The S2000 and P2000 gage can be used
in applications for measuring positive, negative, or differential pressure with an
accuracy of 2%. Standard applications include monitoring filter status, duct static
pressure, room pressure, fan or blower pressure, paint booths, dust collectors, and
cabinet purging along with many others.

Approx. Rs 4,500 / PieceGet Latest Price

Product BrochureProduct Details:

Sensocon Usa Differential Pressure Gauge 0 To 200 Mm Wc

Includes:

• Two 1/8" NPT plugs, two 1/8" rubber tubing adapters, and three mounting adapters with screws

More About This Item

• The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge's motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
• The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.