Offering you a complete choice of products which include magnehelic gauge in pappanamcode industrial estate thiruvananthapuram, dwyer magnehelic gauge in lakhimpur uttar pradesh, dwyer magnehelic gage in mahabaleshwar maharashtra, dwyer magnehelic gage in tirunelveli tamil nadu, dwyer magnehelic gage in gulbarga karnataka and dwyer magnehelic gage in deoria uttar pradesh.
Magnehelic Gauge In Pappanamcode Industrial Estate Thiruvananthapuram
REQUEST CALLBACK
+8
Get Best Quote
✓Thanks for Contacting Us.
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:
Minimum Order Quantity
12 Piece
Dial Size
4 inch / 100 mm
Brand
DWYER USA
Pressure Range
MM WC/ CM / PAC / KPA / INCH
Use
Pharmaceutical Industries
Display Type
Analog
Pressure Type
Differential Pressure
Connection Type
NPT
Connection Size
1/8 inch
Dial Type
Dry
Mounting
Back
Material of casing
Die Cast Aluminum Case And Bezel (ABS For P2000), With Acrylic Cover
Model Name/Number
SERIES 2000
Weight
700 G
Window Material
Acrylic
Wetted Parts
Die Cast Aluminum Case And Bezel (ABS For P2000), With Acrylic Cover
Country of Origin
Made in India
MAGNEHELIC DIFFERENTIAL PRESSURE GAGES HSN CODE
90262000
For More Items Download Dwyer Catalogue
https://www.dwyer-inst.com/catalog/
Magnehelic Gauge In Pappanamcode Industrial Estate Thiruvananthapuram
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES
Indicate Positive, Negative or Differential, Accurate within 1%
No Power Required
Low Cost
Used in Isolation/ Hospital Environments and Temporary Units (No Power Required)
Select The Series 2000 Magnehelic® Gage For a Versatile Low Differential Pressure Gage With a Wide Choice of 81 Models And 27 Options To Choose From. Using Dwyer’s Simple, Frictionless Magnehelic® Gage Movement, It Quickly Indicates Air Or Noncorrosive Gas Pressures--Either Positive, Negative (Vacuum) or Differential. The Design Resists Shock, Vibration, Over-Pressures And is Weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage Option For An Accuracy Within 1% of Full Scale, Located Below in the Product Configurator. Also Included With The –HA Option At No Extra Cost Are a Mirrored Scale Overlay and a 6 Point Calibration Certificate.
NIST CALIBRATION Available In Product Configurator.
Note: May Be Used With Hydrogen. Order a Buna-N Diaphragm. Pressures Must Be Less Than 35 PSI. Please See Series AT-2000 for ATEX Approved. PRODUCT APPLICATIONS
Filter Monitoring
Air Velocity with Dwyer Pitot Tube
Blower Vacuum Monitoring
Fan Pressure Indication
Duct,Room or Building Pressures
Clean Room Positive Pressure Indication
SPECIFICATIONS
Service:Air And Non-Combustible, Compatible Gases (Natural Gas Option Available). Note: May Be Used With Hydrogen. Order a Buna-N Diaphragm. Pressures Must Be Less Than 35 PSI.
Wetted Materials:Consult Factory.
Housing:Die Cast Aluminum Case And Bezel, With Acrylic Cover, Exterior Finish is Coated Gray To Withstand 168 Hour Salt Spray Corrosion Test.
Accuracy:±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100PA, -125PA, -10MM and ±4% (-HA ±2%) on -00, -60PA, -6MM Ranges), Throughout Range at 70°F (21.1°C).
Pressure Limits:-20 in Hg. to 15 PSIG.† (-0.677 bar to 1.034 bar); MP Option: 35 PSIG (2.41 Bar), HP Option: 80 PSIG (5.52 Bar).
Enclosure Rating:IP67.
Overpressure:Relief Plug Opens At Approximately 25 PSIG (1.72 Bar), Standard Gages Only. See Overpressure Protection Note On Catalog Page.
Temperature Limits:20 to 140°F (-6.67 to 60°C). -20°F (-28°C) With Low Temperature Option.
Size:4" (101.6 MM) Diameter Dial Face.
Mounting Orientation:Diaphragm In Vertical Position. Consult Factory For Other Position Orientations.
Process Connections:1/8" Female NPT Duplicate High And Low Pressure Taps - One Pair Side And One Pair Back.
Weight:1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
Standard Accessories:Two 1/8" NPT Plugs For Duplicate Pressure Taps, Two 1/8" Pipe Thread To Rubber Tubing Adapters And Three Flush Mounting Adapterswith Screws. (Mounting And Snap Ring Retainer Substituted For Three Adapters In MP & HP Gage Accessories.)
Agency Approval:Meets The Technical Requirements Of EU Directive 2011/65/EU (RoHS II).
Note: -SP Models Not RoHS Approved.Note: For Applications With High Cycle Rate Within Gage Total Pressure Rating, Next Higher Rating Is Recommended. See Options Page.