Air Washer And AHU Pre Filter Manufacturers Delhi India

Approx. Rs 4,800 / PieceGet Latest Price

• We Do Only 5 Micron/ 10 Micron / 20 Micron Filters

Additional Information:

• Item Code: 5-Micron-HDPE-Air-Filters
• Production Capacity: www.envirotechdelhi.co.in
• Delivery Time: www.envirotechindia.net
• Packaging Details: www.envirotechdelhi.info

Approx. Rs 1,850 / PieceGet Latest Price

Construction: Are Made From High Quality Synthetic Non-Woven Media, Supported By a Fine HDPE Media On Both Sides. Media Is Then Housed Inside An Extruded Aluminium Frame.

Specifications :

• Efficiency : Standard HDPE Pleated Type Pre Filters Have an Efficiency of 90% for 10 Micron Size Particles. Pre Filters With An Efficiency Rating of 80 to 90% to Capture 10 Micron to 20 Micron Size Particles Are Also Available On Order.
• Filtration Class : Filter Grades G3, G4, F5 of EN779, ASHRAE 52.2 Equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 Are Available
• Frame Type : Available in Flange Or Box Type
• Frame Material : Standard Model is Constructed in Galvanized Steel. Other Models With Aluminium Anodized/Stainless Steel Frame With or Without Powder Coating Are Also Available On Order.
• Filter Media : HDPE And Non-Woven Synthetic.
• Gasket : No Gasket is Installed in Standard Filter Model. Non-Woven Syntheti/Rubber Gasket Can Be Ordered On Request
• Separators : None
• Sealant : PU Based Epoxy
• Face Guard : No Face Guard With Standard Model is Supplied. On Order/Request Filter Can Be Protected With Expanded Mesh On Both Sides
• Nominal Depth : Depth Size is Available From 1.0 Inches to 6 Inches (Pre HDPE Pleated And Rod Type)
• Sizes : Standard Size Of The Filter is 610 x 610 x 50 MM in Box or Flange Type. Other Sizes Are Build On Order.
• Pressure Drop : Initial Pressure Drop ~2.5 MM WG and Recommended Final Pressure Drop is 5-10 MM WG
• Operating Conditions : Filter Can Withstand Temperature Up to 80ºC And Relative Humidity of 100% at 0 Condensation. Filter is Washable or Can Be Cleaned By Applying Air Pressure And Reused.

• Air Handling Units (AHUs), Air-Conditioning Systems.
• Power Plants, Chemical and Fertilizer Complexes.
• Green Houses, Automatic Drain Holes, Paint Shops.
• Textile Mills.
• Cement Factories.
• Laminar Air Flow Units.
• Biosafety Hoods.
• Fan Filter Units (FFU).
• Gas Turbine Industry.
• Compressor, Diesel Engines.
• Nuclear Power Station.
• CD-Rom Production Industry.
• Picture Tube Production Industry.
• Semi-conductor Industry.
• Aeronautical Industry And Miscellaneous Industrial Ventilation.

Additional Information:

• Item Code: GI-Fram-Rod-Type-Pre-Filter-From-Bengaluru-Hoodi
• Production Capacity: www.envirotechindustrialproducts.in
• Delivery Time: www.envirotechindustrialproduct.com
• Packaging Details: www.envirotechindustrialproducts.com

Approx. Rs 1,850 / PieceGet Latest Price

GI Farm ROD TYPE Pre Filter Manufacturer From Varkala Kerala India

Construction: Are Made From High Quality Synthetic Non-Woven Media, Supported By a Fine HDPE Media On Both Sides. Media Is Then Housed Inside An Extruded Aluminium Frame.

Specifications :

• Efficiency : Standard HDPE Pleated Type Pre Filters Have an Efficiency of 90% for 10 Micron Size Particles. Pre Filters With An Efficiency Rating of 80 to 90% to Capture 10 Micron to 20 Micron Size Particles Are Also Available On Order.
• Filtration Class : Filter Grades G3, G4, F5 of EN779, ASHRAE 52.2 Equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 Are Available
• Frame Type : Available in Flange Or Box Type
• Frame Material : Standard Model is Constructed in Galvanized Steel. Other Models With Aluminium Anodized/Stainless Steel Frame With or Without Powder Coating Are Also Available On Order.
• Filter Media : HDPE And Non-Woven Synthetic.
• Gasket : No Gasket is Installed in Standard Filter Model. Non-Woven Syntheti/Rubber Gasket Can Be Ordered On Request
• Separators : None
• Sealant : PU Based Epoxy
• Face Guard : No Face Guard With Standard Model is Supplied. On Order/Request Filter Can Be Protected With Expanded Mesh On Both Sides
• Nominal Depth : Depth Size is Available From 1.0 Inches to 6 Inches (Pre HDPE Pleated And Rod Type)
• Sizes : Standard Size Of The Filter is 610 x 610 x 50 MM in Box or Flange Type. Other Sizes Are Build On Order.
• Pressure Drop : Initial Pressure Drop ~2.5 MM WG and Recommended Final Pressure Drop is 5-10 MM WG
• Operating Conditions : Filter Can Withstand Temperature Up to 80ºC And Relative Humidity of 100% at 0 Condensation. Filter is Washable or Can Be Cleaned By Applying Air Pressure And Reused.

• Air Handling Units (AHUs), Air-Conditioning Systems.
• Power Plants, Chemical and Fertilizer Complexes.
• Green Houses, Automatic Drain Holes, Paint Shops.
• Textile Mills.
• Cement Factories.
• Laminar Air Flow Units.
• Biosafety Hoods.
• Fan Filter Units (FFU).
• Gas Turbine Industry.
• Compressor, Diesel Engines.
• Nuclear Power Station.
• CD-Rom Production Industry.
• Picture Tube Production Industry.
• Semi-conductor Industry.
• Aeronautical Industry And Miscellaneous Industrial Ventilation.

Additional Information:

• Item Code: GI-Farm-ROD-TYPE-Pre-Filter-Manufacturer-From-Varkala-Kerala
• Production Capacity: www.envirotechindustrialproducts.co.in
• Delivery Time: www.envirotechindustrialproduct.co.in
• Packaging Details: www.envirotechindustrialproduct.in

Approx. Rs 1,500 / PieceGet Latest Price

Construction: Are Made From High Quality Synthetic Non-Woven Media, Supported By a Fine HDPE Media On Both Sides. Media Is Then Housed Inside An Extruded Aluminium Frame.

Specifications :

• Efficiency : Standard HDPE Pleated Type Pre Filters Have an Efficiency of 90% for 10 Micron Size Particles. Pre Filters With An Efficiency Rating of 80 to 90% to Capture 10 Micron to 20 Micron Size Particles Are Also Available On Order.
• Filtration Class : Filter Grades G3, G4, F5 of EN779, ASHRAE 52.2 Equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 Are Available
• Frame Type : Available in Flange Or Box Type
• Frame Material : Standard Model is Constructed in Galvanized Steel. Other Models With Aluminium Anodized/Stainless Steel Frame With or Without Powder Coating Are Also Available On Order.
• Filter Media : HDPE And Non-Woven Synthetic.
• Gasket : No Gasket is Installed in Standard Filter Model. Non-Woven Syntheti/Rubber Gasket Can Be Ordered On Request
• Separators : None
• Sealant : PU Based Epoxy
• Face Guard : No Face Guard With Standard Model is Supplied. On Order/Request Filter Can Be Protected With Expanded Mesh On Both Sides
• Nominal Depth : Depth Size is Available From 1.0 Inches to 6 Inches (Pre HDPE Pleated And Rod Type)
• Sizes : Standard Size Of The Filter is 610 x 610 x 50 MM in Box or Flange Type. Other Sizes Are Build On Order.
• Pressure Drop : Initial Pressure Drop ~2.5 MM WG and Recommended Final Pressure Drop is 5-10 MM WG
• Operating Conditions : Filter Can Withstand Temperature Up to 80ºC And Relative Humidity of 100% at 0 Condensation. Filter is Washable or Can Be Cleaned By Applying Air Pressure And Reused.

• Air Handling Units (AHUs), Air-Conditioning Systems.
• Power Plants, Chemical and Fertilizer Complexes.
• Green Houses, Automatic Drain Holes, Paint Shops.
• Textile Mills.
• Cement Factories.
• Laminar Air Flow Units.
• Biosafety Hoods.
• Fan Filter Units (FFU).
• Gas Turbine Industry.
• Compressor, Diesel Engines.
• Nuclear Power Station.
• CD-Rom Production Industry.
• Picture Tube Production Industry.
• Semi-conductor Industry.
• Aeronautical Industry And Miscellaneous Industrial Ventilation.

Additional Information:

• Item Code: Pleated-Air-Pre-Filter-24INCH-24INCH-2Inch
• Production Capacity: www.envirotechindustrialproduct.net
• Delivery Time: www.envirotechindustrialproductsindia.in
• Packaging Details: www.envirotechindustrialproductsdelhi.com

Approx. Rs 1,500 / PieceGet Latest Price

ENVIRO TECH INDUSTRIAL PRODUCTS Filters Has Achieved The Status of a Major Indian Air Filters And Clean Room Equipments Manufacturer and Regular Clients Include Most Of The Leading Pharmaceutical And Electronic Product Manufacturers,as Well as Nuclear Power, Atomic Energy And Space Research Establishments. Leading Consultants, User Industries And HVAC Turn-Key Engineering Companies Have Approved Our Products And Test Facilities. ENVIRO TECH INDUSTRIAL PRODUCTS FILTER Fine Filters Are Used For High Level Pre Filtration In Air Conditioning Of Paint Booths, Air Handling Units etc.
 
Fine Filters Are Available in The Range of 1 to 5 Micron:
 

• Low Initial Pressure Drop.
• Light In Weight And Easy To Handle.
• High Cost / Performance Ratio.
• High Dust Holding Capacity.
• Cleanable / Washable.

 
Applications:
 

• General Filtration For Air-Conditioning And Air Handling Units.
• General Air Filtration And Pre-Filtration.
• Spray Booths And Pre-Filtration.

 
Specifications:
 

• Type: Flange or Box
• Frame: Galvanized Steel, Aluminum Anodized,SS304
• Separators: Aluminum
• Filter Media: HDPE Media / Non Woven Synthetic Media

Additional Information:

• Item Code: AHU-Pre-Filter-In-Barhi-Industrial-Area-Hazaribagh
• Production Capacity: www.envirotechdelhi.com
• Delivery Time: www.envirotechindia.co.in
• Packaging Details: www.envirotechdelhi.in

Approx. Rs 1,500 / PieceGet Latest Price

Fine Filters Are Available in The Range of 1 to 5 Micron:

• Low Initial Pressure Drop.
• Light In Weight And Easy To Handle.
• High Cost / Performance Ratio.
• High Dust Holding Capacity.
• Cleanable / Washable.

Applications:

• General Filtration For Air-Conditioning And Air Handling Units.
• General Air Filtration And Pre-Filtration.
• Spray Booths And Pre-Filtration.

Specifications:

• Type: Flange or Box
• Frame: Galvanized Steel, Aluminum Anodized,SS304
• Separators: Aluminum
• Filter Media: HDPE Media / Non Woven Synthetic Media

Additional Information:

• Item Code: AHU-Pre-Filter-In-Kottayam-Kerala
• Production Capacity: www.envirotechindustrialproducts.net
• Delivery Time: www.envirotechindustrialproduct.net
• Packaging Details: www.envirotechindustrialproductsindia.in

Approx. Rs 1,500 / PieceGet Latest Price

Fine Filters Are Available in The Range of 1 to 5 Micron:

• Low Initial Pressure Drop.
• Light In Weight And Easy To Handle.
• High Cost / Performance Ratio.
• High Dust Holding Capacity.
• Cleanable / Washable.

Applications:

• General Filtration For Air-Conditioning And Air Handling Units.
• General Air Filtration And Pre-Filtration.
• Spray Booths And Pre-Filtration.

Specifications:

• Type: Flange or Box
• Frame: Galvanized Steel, Aluminum Anodized,SS304
• Separators: Aluminum
• Filter Media: HDPE Media / Non Woven Synthetic Media

Additional Information:

• Item Code: AHU-Pre-Filter-In-RANIWARA-Industrial-Area-RAJASTHAN
• Production Capacity: www.envirotechindustrialproducts.in
• Delivery Time: www.envirotechindustrialproduct.com
• Packaging Details: www.envirotechindustrialproducts.com

Approx. Rs 1,500 / PieceGet Latest Price

ENVIRO TECH INDUSTRIAL PRODUCTS Filters Has Achieved The Status of a Major Indian Air Filters And Clean Room Equipments Manufacturer and Regular Clients Include Most Of The Leading Pharmaceutical And Electronic Product Manufacturers,as Well as Nuclear Power, Atomic Energy And Space Research Establishments. Leading Consultants, User Industries And HVAC Turn-Key Engineering Companies Have Approved Our Products And Test Facilities. ENVIRO TECH INDUSTRIAL PRODUCTS FILTER Fine Filters Are Used For High Level Pre Filtration In Air Conditioning Of Paint Booths, Air Handling Units etc.
 
Fine Filters Are Available in The Range of 1 to 5 Micron:
 

• Low Initial Pressure Drop.
• Light In Weight And Easy To Handle.
• High Cost / Performance Ratio.
• High Dust Holding Capacity.
• Cleanable / Washable.

 
Applications:
 

• General Filtration For Air-Conditioning And Air Handling Units.
• General Air Filtration And Pre-Filtration.
• Spray Booths And Pre-Filtration.

 
Specifications:
 

• Type: Flange or Box
• Frame: Galvanized Steel, Aluminum Anodized,SS304
• Separators: Aluminum
• Filter Media: HDPE Media / Non Woven Synthetic Media

Additional Information:

• Item Code: AHU-Pre-Filter-In-Tupudana-Industrial-Area-Ranchi-Jharkhand
• Production Capacity: www.envirotechindustrialproductsdelhi.com
• Delivery Time: www.envirotechindustrialproduct.info
• Packaging Details: www.envirotechindustrialproducts.info

Approx. Rs 1,500 / PieceGet Latest Price

Fine Filters Are Available in The Range of 1 to 5 Micron:

• Low Initial Pressure Drop.
• Light In Weight And Easy To Handle.
• High Cost / Performance Ratio.
• High Dust Holding Capacity.
• Cleanable / Washable.

Applications:

• General Filtration For Air-Conditioning And Air Handling Units.
• General Air Filtration And Pre-Filtration.
• Spray Booths And Pre-Filtration.

Specifications:

• Type: Flange or Box
• Frame: Galvanized Steel, Aluminum Anodized,SS304
• Separators: Aluminum
• Filter Media: HDPE Media / Non Woven Synthetic Media

Additional Information:

• Item Code: AHU-Pre-Filter-In-Gwalior-Madhya-Pradesh
• Production Capacity: www.envirotechindustrialproducts.co.in
• Delivery Time: www.envirotechindustrialproduct.co.in
• Packaging Details: www.envirotechindustrialproduct.in

Approx. Rs 1,500 / PieceGet Latest Price

ENVIRO TECH INDUSTRIAL PRODUCTS Filters Has Achieved The Status of a Major Indian Air Filters And Clean Room Equipments Manufacturer and Regular Clients Include Most Of The Leading Pharmaceutical And Electronic Product Manufacturers,as Well as Nuclear Power, Atomic Energy And Space Research Establishments. Leading Consultants, User Industries And HVAC Turn-Key Engineering Companies Have Approved Our Products And Test Facilities. ENVIRO TECH INDUSTRIAL PRODUCTS FILTER Fine Filters Are Used For High Level Pre Filtration In Air Conditioning Of Paint Booths, Air Handling Units etc.
 
Fine Filters Are Available in The Range of 1 to 5 Micron:
 

• Low Initial Pressure Drop.
• Light In Weight And Easy To Handle.
• High Cost / Performance Ratio.
• High Dust Holding Capacity.
• Cleanable / Washable.

 
Applications:
 

• General Filtration For Air-Conditioning And Air Handling Units.
• General Air Filtration And Pre-Filtration.
• Spray Booths And Pre-Filtration.

 
Specifications:
 

• Type: Flange or Box
• Frame: Galvanized Steel, Aluminum Anodized,SS304
• Separators: Aluminum
• Filter Media: HDPE Media / Non Woven Synthetic Media

Additional Information:

• Item Code: AHU-Pre-Filter-In-Dhanbad-Jharkhand-India
• Production Capacity: www.envirotechindustrialproduct.com
• Delivery Time: www.envirotechindustrialproducts.in
• Packaging Details: www.envirotechindustrialproduct.in

Approx. Rs 1,500 / PieceGet Latest Price

Construction: Are Made From High Quality Synthetic Non-Woven Media, Supported By a Fine HDPE Media On Both Sides. Media Is Then Housed Inside An Extruded Aluminium Frame.

Specifications :

• Efficiency : Standard HDPE Pleated Type Pre Filters Have an Efficiency of 90% for 10 Micron Size Particles. Pre Filters With An Efficiency Rating of 80 to 90% to Capture 10 Micron to 20 Micron Size Particles Are Also Available On Order.
• Filtration Class : Filter Grades G3, G4, F5 of EN779, ASHRAE 52.2 Equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 Are Available
• Frame Type : Available in Flange Or Box Type
• Frame Material : Standard Model is Constructed in Galvanized Steel. Other Models With Aluminium Anodized/Stainless Steel Frame With or Without Powder Coating Are Also Available On Order.
• Filter Media : HDPE And Non-Woven Synthetic.
• Gasket : No Gasket is Installed in Standard Filter Model. Non-Woven Syntheti/Rubber Gasket Can Be Ordered On Request
• Separators : None
• Sealant : PU Based Epoxy
• Face Guard : No Face Guard With Standard Model is Supplied. On Order/Request Filter Can Be Protected With Expanded Mesh On Both Sides
• Nominal Depth : Depth Size is Available From 1.0 Inches to 6 Inches (Pre HDPE Pleated And Rod Type)
• Sizes : Standard Size Of The Filter is 610 x 610 x 50 MM in Box or Flange Type. Other Sizes Are Build On Order.
• Pressure Drop : Initial Pressure Drop ~2.5 MM WG and Recommended Final Pressure Drop is 5-10 MM WG
• Operating Conditions : Filter Can Withstand Temperature Up to 80ºC And Relative Humidity of 100% at 0 Condensation. Filter is Washable or Can Be Cleaned By Applying Air Pressure And Reused.

• Air Handling Units (AHUs), Air-Conditioning Systems.
• Power Plants, Chemical and Fertilizer Complexes.
• Green Houses, Automatic Drain Holes, Paint Shops.
• Textile Mills.
• Cement Factories.
• Laminar Air Flow Units.
• Biosafety Hoods.
• Fan Filter Units (FFU).
• Gas Turbine Industry.
• Compressor, Diesel Engines.
• Nuclear Power Station.
• CD-Rom Production Industry.
• Picture Tube Production Industry.
• Semi-conductor Industry.
• Aeronautical Industry And Miscellaneous Industrial Ventilation.

Additional Information:

• Item Code: Pleated-Dust-Pre-Filter-24Inch-24Inch-2Inch
• Production Capacity: www.envirotechindustrialproducts.co.in
• Delivery Time: www.envirotechindustrialproduct.co.in
• Packaging Details: www.envirotechindustrialproduct.in

Approx. Rs 1,500 / PieceGet Latest Price

Construction: Are Made From High Quality Synthetic Non-Woven Media, Supported By a Fine HDPE Media On Both Sides. Media Is Then Housed Inside An Extruded Aluminium Frame.

Specifications :

• Efficiency : Standard HDPE Pleated Type Pre Filters Have an Efficiency of 90% for 10 Micron Size Particles. Pre Filters With An Efficiency Rating of 80 to 90% to Capture 10 Micron to 20 Micron Size Particles Are Also Available On Order.
• Filtration Class : Filter Grades G3, G4, F5 of EN779, ASHRAE 52.2 Equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 Are Available
• Frame Type : Available in Flange Or Box Type
• Frame Material : Standard Model is Constructed in Galvanized Steel. Other Models With Aluminium Anodized/Stainless Steel Frame With or Without Powder Coating Are Also Available On Order.
• Filter Media : HDPE And Non-Woven Synthetic.
• Gasket : No Gasket is Installed in Standard Filter Model. Non-Woven Syntheti/Rubber Gasket Can Be Ordered On Request
• Separators : None
• Sealant : PU Based Epoxy
• Face Guard : No Face Guard With Standard Model is Supplied. On Order/Request Filter Can Be Protected With Expanded Mesh On Both Sides
• Nominal Depth : Depth Size is Available From 1.0 Inches to 6 Inches (Pre HDPE Pleated And Rod Type)
• Sizes : Standard Size Of The Filter is 610 x 610 x 50 MM in Box or Flange Type. Other Sizes Are Build On Order.
• Pressure Drop : Initial Pressure Drop ~2.5 MM WG and Recommended Final Pressure Drop is 5-10 MM WG
• Operating Conditions : Filter Can Withstand Temperature Up to 80ºC And Relative Humidity of 100% at 0 Condensation. Filter is Washable or Can Be Cleaned By Applying Air Pressure And Reused.

• Air Handling Units (AHUs), Air-Conditioning Systems.
• Power Plants, Chemical and Fertilizer Complexes.
• Green Houses, Automatic Drain Holes, Paint Shops.
• Textile Mills.
• Cement Factories.
• Laminar Air Flow Units.
• Biosafety Hoods.
• Fan Filter Units (FFU).
• Gas Turbine Industry.
• Compressor, Diesel Engines.
• Nuclear Power Station.
• CD-Rom Production Industry.
• Picture Tube Production Industry.
• Semi-conductor Industry.
• Aeronautical Industry And Miscellaneous Industrial Ventilation.

Additional Information:

• Item Code: 24INCH-24INCH-2Inch-Washable-Metal-Air-Filter
• Production Capacity: www.envirotechindustrialproducts.in
• Delivery Time: www.envirotechindustrialproduct.com
• Packaging Details: www.envirotechindustrialproducts.com

Approx. Rs 1,500 / PieceGet Latest Price

Construction: Are Made From High Quality Synthetic Non-Woven Media, Supported By a Fine HDPE Media On Both Sides. Media Is Then Housed Inside An Extruded Aluminium Frame.

Specifications :

• Efficiency : Standard HDPE Pleated Type Pre Filters Have an Efficiency of 90% for 10 Micron Size Particles. Pre Filters With An Efficiency Rating of 80 to 90% to Capture 10 Micron to 20 Micron Size Particles Are Also Available On Order.
• Filtration Class : Filter Grades G3, G4, F5 of EN779, ASHRAE 52.2 Equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 Are Available
• Frame Type : Available in Flange Or Box Type
• Frame Material : Standard Model is Constructed in Galvanized Steel. Other Models With Aluminium Anodized/Stainless Steel Frame With or Without Powder Coating Are Also Available On Order.
• Filter Media : HDPE And Non-Woven Synthetic.
• Gasket : No Gasket is Installed in Standard Filter Model. Non-Woven Syntheti/Rubber Gasket Can Be Ordered On Request
• Separators : None
• Sealant : PU Based Epoxy
• Face Guard : No Face Guard With Standard Model is Supplied. On Order/Request Filter Can Be Protected With Expanded Mesh On Both Sides
• Nominal Depth : Depth Size is Available From 1.0 Inches to 6 Inches (Pre HDPE Pleated And Rod Type)
• Sizes : Standard Size Of The Filter is 610 x 610 x 50 MM in Box or Flange Type. Other Sizes Are Build On Order.
• Pressure Drop : Initial Pressure Drop ~2.5 MM WG and Recommended Final Pressure Drop is 5-10 MM WG
• Operating Conditions : Filter Can Withstand Temperature Up to 80ºC And Relative Humidity of 100% at 0 Condensation. Filter is Washable or Can Be Cleaned By Applying Air Pressure And Reused.

• Air Handling Units (AHUs), Air-Conditioning Systems.
• Power Plants, Chemical and Fertilizer Complexes.
• Green Houses, Automatic Drain Holes, Paint Shops.
• Textile Mills.
• Cement Factories.
• Laminar Air Flow Units.
• Biosafety Hoods.
• Fan Filter Units (FFU).
• Gas Turbine Industry.
• Compressor, Diesel Engines.
• Nuclear Power Station.
• CD-Rom Production Industry.
• Picture Tube Production Industry.
• Semi-conductor Industry.
• Aeronautical Industry And Miscellaneous Industrial Ventilation.

Additional Information:

• Item Code: Washable-Metal-Air-Filter-24INCH-24INCH-2Inch
• Production Capacity: www.envirotechindustrialproductsdelhi.com
• Delivery Time: www.envirotechindustrialproduct.info
• Packaging Details: www.envirotechindustrialproducts.info

Approx. Rs 1,500 / PieceGet Latest Price

Construction: Are Made From High Quality Synthetic Non-Woven Media, Supported By a Fine HDPE Media On Both Sides. Media Is Then Housed Inside An Extruded Aluminium Frame.

Specifications :

• Efficiency : Standard HDPE Pleated Type Pre Filters Have an Efficiency of 90% for 10 Micron Size Particles. Pre Filters With An Efficiency Rating of 80 to 90% to Capture 10 Micron to 20 Micron Size Particles Are Also Available On Order.
• Filtration Class : Filter Grades G3, G4, F5 of EN779, ASHRAE 52.2 Equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 Are Available
• Frame Type : Available in Flange Or Box Type
• Frame Material : Standard Model is Constructed in Galvanized Steel. Other Models With Aluminium Anodized/Stainless Steel Frame With or Without Powder Coating Are Also Available On Order.
• Filter Media : HDPE And Non-Woven Synthetic.
• Gasket : No Gasket is Installed in Standard Filter Model. Non-Woven Syntheti/Rubber Gasket Can Be Ordered On Request
• Separators : None
• Sealant : PU Based Epoxy
• Face Guard : No Face Guard With Standard Model is Supplied. On Order/Request Filter Can Be Protected With Expanded Mesh On Both Sides
• Nominal Depth : Depth Size is Available From 1.0 Inches to 6 Inches (Pre HDPE Pleated And Rod Type)
• Sizes : Standard Size Of The Filter is 610 x 610 x 50 MM in Box or Flange Type. Other Sizes Are Build On Order.
• Pressure Drop : Initial Pressure Drop ~2.5 MM WG and Recommended Final Pressure Drop is 5-10 MM WG
• Operating Conditions : Filter Can Withstand Temperature Up to 80ºC And Relative Humidity of 100% at 0 Condensation. Filter is Washable or Can Be Cleaned By Applying Air Pressure And Reused.

• Air Handling Units (AHUs), Air-Conditioning Systems.
• Power Plants, Chemical and Fertilizer Complexes.
• Green Houses, Automatic Drain Holes, Paint Shops.
• Textile Mills.
• Cement Factories.
• Laminar Air Flow Units.
• Biosafety Hoods.
• Fan Filter Units (FFU).
• Gas Turbine Industry.
• Compressor, Diesel Engines.
• Nuclear Power Station.
• CD-Rom Production Industry.
• Picture Tube Production Industry.
• Semi-conductor Industry.
• Aeronautical Industry And Miscellaneous Industrial Ventilation.

Additional Information:

• Item Code: Washable-ALUMINUM-Mesh-Filter-24INCH-24INCH-2Inch
• Production Capacity: www.envirotechindustrialproducts.co.in
• Delivery Time: www.envirotechindustrialproduct.co.in
• Packaging Details: www.envirotechindustrialproduct.in

Approx. Rs 1,500 / PieceGet Latest Price

Construction: Are Made From High Quality Synthetic Non-Woven Media, Supported By a Fine HDPE Media On Both Sides. Media Is Then Housed Inside An Extruded Aluminium Frame.

Specifications :

• Efficiency : Standard HDPE Pleated Type Pre Filters Have an Efficiency of 90% for 10 Micron Size Particles. Pre Filters With An Efficiency Rating of 80 to 90% to Capture 10 Micron to 20 Micron Size Particles Are Also Available On Order.
• Filtration Class : Filter Grades G3, G4, F5 of EN779, ASHRAE 52.2 Equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 Are Available
• Frame Type : Available in Flange Or Box Type
• Frame Material : Standard Model is Constructed in Galvanized Steel. Other Models With Aluminium Anodized/Stainless Steel Frame With or Without Powder Coating Are Also Available On Order.
• Filter Media : HDPE And Non-Woven Synthetic.
• Gasket : No Gasket is Installed in Standard Filter Model. Non-Woven Syntheti/Rubber Gasket Can Be Ordered On Request
• Separators : None
• Sealant : PU Based Epoxy
• Face Guard : No Face Guard With Standard Model is Supplied. On Order/Request Filter Can Be Protected With Expanded Mesh On Both Sides
• Nominal Depth : Depth Size is Available From 1.0 Inches to 6 Inches (Pre HDPE Pleated And Rod Type)
• Sizes : Standard Size Of The Filter is 610 x 610 x 50 MM in Box or Flange Type. Other Sizes Are Build On Order.
• Pressure Drop : Initial Pressure Drop ~2.5 MM WG and Recommended Final Pressure Drop is 5-10 MM WG
• Operating Conditions : Filter Can Withstand Temperature Up to 80ºC And Relative Humidity of 100% at 0 Condensation. Filter is Washable or Can Be Cleaned By Applying Air Pressure And Reused.

• Air Handling Units (AHUs), Air-Conditioning Systems.
• Power Plants, Chemical and Fertilizer Complexes.
• Green Houses, Automatic Drain Holes, Paint Shops.
• Textile Mills.
• Cement Factories.
• Laminar Air Flow Units.
• Biosafety Hoods.
• Fan Filter Units (FFU).
• Gas Turbine Industry.
• Compressor, Diesel Engines.
• Nuclear Power Station.
• CD-Rom Production Industry.
• Picture Tube Production Industry.
• Semi-conductor Industry.
• Aeronautical Industry And Miscellaneous Industrial Ventilation.

Additional Information:

• Item Code: 24Inch-24Inch-2Inch-Standard-Pleated-Air-Filter
• Production Capacity: www.envirotechindustrialproducts.in
• Delivery Time: www.envirotechindustrialproduct.com
• Packaging Details: www.envirotechindustrialproducts.com

Approx. Rs 1,800 / pieceGet Latest Price

• We Do Only 5 Micron/ 10 Micron / 20 Micron Filters

Additional Information:

• Item Code: 20-Micron-HDPE-Air-Filter
• Production Capacity: www.envirotechindia.co.in
• Delivery Time: www.envirotechdelhi.com
• Packaging Details: www.envirotechindustrialproducts.info

Approx. Rs 1,500 / pieceGet Latest Price

• We Do Only 5 Micron/ 10 Micron / 20 Micron Filters

Additional Information:

• Item Code: 10-Micron-HDPE-Air-Filter
• Production Capacity: www.envirotechindustrialproduct.info
• Delivery Time: www.envirotechindustrialproductsdelhi.com
• Packaging Details: www.envirotechindustrialproductsindia.in

Approx. Rs 1,500 / PieceGet Latest Price

Metal Mesh Air Filter 24 INCH X 24 INCH X 2 Inch

Construction: Are Made From High Quality Synthetic Non-Woven Media, Supported By a Fine HDPE Media On Both Sides. Media Is Then Housed Inside An Extruded Aluminium Frame.

Specifications :

• Efficiency : Standard HDPE Pleated Type Pre Filters Have an Efficiency of 90% for 10 Micron Size Particles. Pre Filters With An Efficiency Rating of 80 to 90% to Capture 10 Micron to 20 Micron Size Particles Are Also Available On Order.
• Filtration Class : Filter Grades G3, G4, F5 of EN779, ASHRAE 52.2 Equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 Are Available
• Frame Type : Available in Flange Or Box Type
• Frame Material : Standard Model is Constructed in Galvanized Steel. Other Models With Aluminium Anodized/Stainless Steel Frame With or Without Powder Coating Are Also Available On Order.
• Filter Media : HDPE And Non-Woven Synthetic.
• Gasket : No Gasket is Installed in Standard Filter Model. Non-Woven Syntheti/Rubber Gasket Can Be Ordered On Request
• Separators : None
• Sealant : PU Based Epoxy
• Face Guard : No Face Guard With Standard Model is Supplied. On Order/Request Filter Can Be Protected With Expanded Mesh On Both Sides
• Nominal Depth : Depth Size is Available From 1.0 Inches to 6 Inches (Pre HDPE Pleated And Rod Type)
• Sizes : Standard Size Of The Filter is 610 x 610 x 50 MM in Box or Flange Type. Other Sizes Are Build On Order.
• Pressure Drop : Initial Pressure Drop ~2.5 MM WG and Recommended Final Pressure Drop is 5-10 MM WG
• Operating Conditions : Filter Can Withstand Temperature Up to 80ºC And Relative Humidity of 100% at 0 Condensation. Filter is Washable or Can Be Cleaned By Applying Air Pressure And Reused.

• Air Handling Units (AHUs), Air-Conditioning Systems.
• Power Plants, Chemical and Fertilizer Complexes.
• Green Houses, Automatic Drain Holes, Paint Shops.
• Textile Mills.
• Cement Factories.
• Laminar Air Flow Units.
• Biosafety Hoods.
• Fan Filter Units (FFU).
• Gas Turbine Industry.
• Compressor, Diesel Engines.
• Nuclear Power Station.
• CD-Rom Production Industry.
• Picture Tube Production Industry.
• Semi-conductor Industry.
• Aeronautical Industry And Miscellaneous Industrial Ventilation.

Product Price :Get Latest Price

Fine Filters Are Available in The Range of 1 to 5 Micron:

• Low Initial Pressure Drop.
• Light In Weight And Easy To Handle.
• High Cost / Performance Ratio.
• High Dust Holding Capacity.
• Cleanable / Washable.

Applications:

• General Filtration For Air-Conditioning And Air Handling Units.
• General Air Filtration And Pre-Filtration.
• Spray Booths And Pre-Filtration.

Specifications:

• Type: Flange or Box
• Frame: Galvanized Steel, Aluminum Anodized,SS304
• Separators: Aluminum
• Filter Media: HDPE Media / Non Woven Synthetic Media

Additional Information:

• Item Code: AIR-BRAND-INDUSTRIAL-AHU-FILTER

Approx. Rs 1,500 / PieceGet Latest Price

Fine Filters Are Available in The Range of 1 to 5 Micron:

• Low Initial Pressure Drop.
• Light In Weight And Easy To Handle.
• High Cost / Performance Ratio.
• High Dust Holding Capacity.
• Cleanable / Washable.

Applications:

• General Filtration For Air-Conditioning And Air Handling Units.
• General Air Filtration And Pre-Filtration.
• Spray Booths And Pre-Filtration.

Specifications:

• Type: Flange or Box
• Frame: Galvanized Steel, Aluminum Anodized,SS304
• Separators: Aluminum
• Filter Media: HDPE Media / Non Woven Synthetic Media

Additional Information:

• Item Code: AHU-Pre-Filter-In-Ongole-Andhra-Pradesh
• Production Capacity: www.envirotechdelhi.net
• Delivery Time: www.envirotechindia.info
• Packaging Details: www.envirotechdelhi.info