Send Email
0804605761180% Response Rate
Search
Home » Products & Services » DWYER Around The Globe Contact Information - Enviro Tech Industrial Products
DWYER Around The Globe Contact Information - Enviro Tech Industrial Products
Leading Manufacturer of magnehelic gauge dwyer model 2000-30pa range 0-30 pa, magnehelic gauge dwyer usa model 2002 range 0-2 inch, dwyer 2301 magnehelic differential pressure gauge 0.5-0-0.5 inch w.c, dwyer 2000-80cm series 2000 magnehelic pressure gage, dwyer magnehelic gauge range 5"-0-5" and dwyer magnehelic gauge range 5 inch-to-5 inch from New Delhi.MAGNEHELIC GAUGE DWYER Model 2000-30PA Range 0-30 Pa
REQUEST CALLBACK
-
-
-
- +9
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 24 Piece |
| Dial Size | 4 inch / 100 mm |
| Brand | DWYER USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Country of Origin | Made in India |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| MAGNEHELIC GAUGE DWYER USA HSN CODE | 90262000 |
| Connection Size | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
MAGNEHELIC GAUGE DWYER USA Model 2000-30PA Range 0-30 Pa
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES
Indicate Positive, Negative or Differential, Accurate within 1%
- No Power Required
- Low Cost
- Used in Isolation/ Hospital Environments and Temporary Units (No Power Required)
Select The Series 2000 Magnehelic® Gage For a Versatile Low Differential Pressure Gage With a Wide Choice of 81 Models And 27 Options To Choose From. Using Dwyer’s Simple, Frictionless Magnehelic® Gage Movement, It Quickly Indicates Air Or Noncorrosive Gas Pressures--Either Positive, Negative (Vacuum) or Differential. The Design Resists Shock, Vibration, Over-Pressures And is Weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage Option For An Accuracy Within 1% of Full Scale, Located Below in the Product Configurator. Also Included With The –HA Option At No Extra Cost Are a Mirrored Scale Overlay and a 6 Point Calibration Certificate.
NIST CALIBRATION Available In Product Configurator.
Note: May Be Used With Hydrogen. Order a Buna-N Diaphragm. Pressures Must Be Less Than 35 PSI.
Please See Series AT-2000 for ATEX Approved.
PRODUCT APPLICATIONS
- Filter Monitoring
- Air Velocity with Dwyer Pitot Tube
- Blower Vacuum Monitoring
- Fan Pressure Indication
- Duct,Room or Building Pressures
- Clean Room Positive Pressure Indication
SPECIFICATIONS
- Service:Air And Non-Combustible, Compatible Gases (Natural Gas Option Available). Note: May Be Used With Hydrogen. Order a Buna-N Diaphragm. Pressures Must Be Less Than 35 PSI.
- Wetted Materials:Consult Factory.
- Housing:Die Cast Aluminum Case And Bezel, With Acrylic Cover, Exterior Finish is Coated Gray To Withstand 168 Hour Salt Spray Corrosion Test.
- Accuracy:±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100PA, -125PA, -10MM and ±4% (-HA ±2%) on -00, -60PA, -6MM Ranges), Throughout Range at 70°F (21.1°C).
- Pressure Limits:-20 in Hg. to 15 PSIG.† (-0.677 bar to 1.034 bar); MP Option: 35 PSIG (2.41 Bar), HP Option: 80 PSIG (5.52 Bar).
- Enclosure Rating:IP67.
- Overpressure:Relief Plug Opens At Approximately 25 PSIG (1.72 Bar), Standard Gages Only. See Overpressure Protection Note On Catalog Page.
- Temperature Limits:20 to 140°F (-6.67 to 60°C). -20°F (-28°C) With Low Temperature Option.
- Size:4" (101.6 MM) Diameter Dial Face.
- Mounting Orientation:Diaphragm In Vertical Position. Consult Factory For Other Position Orientations.
- Process Connections:1/8" Female NPT Duplicate High And Low Pressure Taps - One Pair Side And One Pair Back.
- Weight:1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
- Standard Accessories:Two 1/8" NPT Plugs For Duplicate Pressure Taps, Two 1/8" Pipe Thread To Rubber Tubing Adapters And Three Flush Mounting Adapterswith Screws. (Mounting And Snap Ring Retainer Substituted For Three Adapters In MP & HP Gage Accessories.)
- Agency Approval:Meets The Technical Requirements Of EU Directive 2011/65/EU (RoHS II).
- Note: -SP Models Not RoHS Approved.Note: For Applications With High Cycle Rate Within Gage Total Pressure Rating, Next Higher Rating Is Recommended. See Options Page.
Additional Information:
- Item Code: MAGNEHELIC-GAUGE-DWYER-Model-2000-30PA-Range-0-30-Pa
- Production Capacity: www.envirotechdelhi.co.in
- Delivery Time: www.envirotechindia.net
- Packaging Details: www.envirotechdelhi.info
Yes! I am interested
Magnehelic Gauge Dwyer Usa Model 2002 Range 0-2 Inch
REQUEST CALLBACK
-
-
-
- +9
Get Best Quote
Approx. Rs 12,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30 Piece |
| Dial Size | 4 inch / 100 mm |
| Brand | DWYER USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Country of Origin | Made in India |
| Pressure Range | MM WC/ CM / PAC / KPA / INCH |
| Material | Die Cast Aluminum Case And Bezel,With Acrylic Cover,Exterior Finish Is Coated Gray To Withstand 16 |
| MAGNEHELIC GAUGE DWYER USA HSN CODE | 90262000 |
| Connection Size | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
MAGNEHELIC GAUGE DWYER USA Model 2002 Range 0-2 Inch
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES
Indicate Positive, Negative or Differential, Accurate within 1%
- No Power Required
- Low Cost
- Used in Isolation/ Hospital Environments and Temporary Units (No Power Required)
Select The Series 2000 Magnehelic® Gage For a Versatile Low Differential Pressure Gage With a Wide Choice of 81 Models And 27 Options To Choose From. Using Dwyer’s Simple, Frictionless Magnehelic® Gage Movement, It Quickly Indicates Air Or Noncorrosive Gas Pressures--Either Positive, Negative (Vacuum) or Differential. The Design Resists Shock, Vibration, Over-Pressures And is Weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage Option For An Accuracy Within 1% of Full Scale, Located Below in the Product Configurator. Also Included With The –HA Option At No Extra Cost Are a Mirrored Scale Overlay and a 6 Point Calibration Certificate.
NIST CALIBRATION Available In Product Configurator.
Note: May Be Used With Hydrogen. Order a Buna-N Diaphragm. Pressures Must Be Less Than 35 PSI.
Please See Series AT-2000 for ATEX Approved.
PRODUCT APPLICATIONS
- Filter Monitoring
- Air Velocity with Dwyer Pitot Tube
- Blower Vacuum Monitoring
- Fan Pressure Indication
- Duct,Room or Building Pressures
- Clean Room Positive Pressure Indication
SPECIFICATIONS
- Service:Air And Non-Combustible, Compatible Gases (Natural Gas Option Available). Note: May Be Used With Hydrogen. Order a Buna-N Diaphragm. Pressures Must Be Less Than 35 PSI.
- Wetted Materials:Consult Factory.
- Housing:Die Cast Aluminum Case And Bezel, With Acrylic Cover, Exterior Finish is Coated Gray To Withstand 168 Hour Salt Spray Corrosion Test.
- Accuracy:±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100PA, -125PA, -10MM and ±4% (-HA ±2%) on -00, -60PA, -6MM Ranges), Throughout Range at 70°F (21.1°C).
- Pressure Limits:-20 in Hg. to 15 PSIG.† (-0.677 bar to 1.034 bar); MP Option: 35 PSIG (2.41 Bar), HP Option: 80 PSIG (5.52 Bar).
- Enclosure Rating:IP67.
- Overpressure:Relief Plug Opens At Approximately 25 PSIG (1.72 Bar), Standard Gages Only. See Overpressure Protection Note On Catalog Page.
- Temperature Limits:20 to 140°F (-6.67 to 60°C). -20°F (-28°C) With Low Temperature Option.
- Size:4" (101.6 MM) Diameter Dial Face.
- Mounting Orientation:Diaphragm In Vertical Position. Consult Factory For Other Position Orientations.
- Process Connections:1/8" Female NPT Duplicate High And Low Pressure Taps - One Pair Side And One Pair Back.
- Weight:1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
- Standard Accessories:Two 1/8" NPT Plugs For Duplicate Pressure Taps, Two 1/8" Pipe Thread To Rubber Tubing Adapters And Three Flush Mounting Adapterswith Screws. (Mounting And Snap Ring Retainer Substituted For Three Adapters In MP & HP Gage Accessories.)
- Agency Approval:Meets The Technical Requirements Of EU Directive 2011/65/EU (RoHS II).
- Note: -SP Models Not RoHS Approved.Note: For Applications With High Cycle Rate Within Gage Total Pressure Rating, Next Higher Rating Is Recommended. See Options Page.
Additional Information:
- Item Code: MAGNEHELIC-GAUGE-DWYER-USA-Model-2002-Range-0-2-Inch
- Production Capacity: www.envirotechdelhi.net
- Delivery Time: www.envirotechdelhi.in
- Packaging Details: www.envirotechindia.co.in
Yes! I am interested
Dwyer 2301 Magnehelic Differential Pressure Gauge 0.5-0-0.5 Inch W.C
REQUEST CALLBACK
-
-
-
- +5
Get Best Quote
Approx. Rs 12,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 12 Piece |
| Dial Size | 4 inch / 100 mm |
| Pressure Range | MM WC, PAC,INCH,CM,KPA,PSI |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | DWYER USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Mounting | Back |
| Model Name/Number | 2301 |
| Pointer Material | Die cast aluminum case and bezel, with acrylic cover Exterior finish is coated gray to withstand 168 |
| Weight | 750 G |
Dwyer 2301 Magnehelic Differential Pressure Gauge 0.5-0-0.5 Inch W.C
Dwyer 2301 MAGNEHELIC, PRESSURE GAUGE, 0.5/0/0.5
- Precision litho-printed scale is accurate and easy to read.
- Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.
- Pointer stops of molded rubber prevent pointer over-travel without damage.
- "Wishbone" assembly provides mounting for helix, helix bearings and pointer shaft.
- Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.
- Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.
- Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.
- Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.
- Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.
- Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.
- Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.
- Blowout plug of silicone rubber protects against overpressure on 15 psig rated models. Opens at approximately 25 psig.
- O-ring seal for cover assures pressure integrity of case.
| Service | Air and non-combustible, compatible gases May be used with hydrogen Pressures must be less than 35 psi |
| Housing | Die cast aluminum case and bezel, with acrylic cover Exterior finish is coated gray to withstand 168 hour salt spray corrosion test |
| Accuracy | ±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100 PA, -125 PA, -10 MM ±4% (-HA ±2%) on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C) |
| Pressure Limits | -20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar) MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar) |
| Enclosure Rating | IP67 |
| Overpressure | Relief plug opens at approximately 25 psig (1.72 bar), standard gages only |
| Temperature Limits | 20 to 140°F (-6.67 to 60°C) -20°F (-28°C) with low temperature option |
| Mounting Orientation | Diaphragm in vertical position |
| Process Connections | ⅛" emale NPT duplicate high and low pressure taps - one pair side and one pair back |
| Dimensions | 4" (101.6 mm) diameter dial face |
Additional Information:
- Item Code: Dwyer-2301-Magnehelic-DPG-0.5-0-0.5-Inch-W.C
- Production Capacity: www.envirotechindustrialproducts.co.in
- Delivery Time: www.envirotechindustrialproduct.co.in
- Packaging Details: www.envirotechindustrialproduct.in
Yes! I am interested
Dwyer 2000-80CM Series 2000 Magnehelic Pressure Gage
REQUEST CALLBACK
-
-
-
- +1
Get Best Quote
Approx. Rs 12,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 12 Piece |
| Dial Size | 4 inch / 100 mm |
| Pressure Range | MM WC, PAC,INCH,CM,KPA,PSI |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | DWYER USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Mounting | Back |
| Model Name/Number | Dwyer 2000-80CM Series 2000 |
| Pointer Material | Die Cast Aluminum Case And Bezel, With Acrylic Cover, Exterior Finish Is Coated Gray To Withstand 16 |
| Weight | 750 G |
| Window Material | Acrylic |
| Wetted Parts | Die Cast Aluminum Case And Bezel, With Acrylic Cover, Exterior Finish Is Coated Gray To Withstand 16 |
| Country of Origin | Made in India |
Dwyer 2000-80CM Series 2000 Magnehelic Pressure Gage
000-80CM Magnehelic Differential Pressure Gauge 0-80 CM
Select the Dwyer® Magnehelic® gage for high accuracy — guaranteed within 2% of full scale — and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic® gage movement, it quickly indicates low air or non-corrosive gas pressures — either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.
The Magnehelic® gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.
Note: May be used with Hydrogen. When ordering a Buna-N diaphragm pressures must be less than 35 psi.
| Housing Material | Die cast aluminum case and bezel, with acrylic cover. Exterior finish is coated gray to withstand 168 hour salt spray corrosion test. |
|---|---|
| Accuracy | ±2% of full scale (±3% on - 0, -100 Pa, -125 Pa, 10MM and ±4% on - 00, -60 Pa, -6MM ranges), throughout range at 70°F (21.1°C). |
| Pressure Limits | -20Ë Hg. to 15 psig.†(-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar). |
| Temperature Limits | 20 to 140°F.* (-6.67 to 60°C). |
| Size | 4Ë (101.6 mm) Diameter dial face. |
Additional Information:
- Item Code: Dwyer-2000-80CM-Series-2000-Magnehelic-Pressure-Gage
- Production Capacity: www.envirotechindustrialproducts.in
- Delivery Time: www.envirotechindustrialproduct.com
- Packaging Details: www.envirotechindustrialproducts.com
Yes! I am interested
Dwyer Magnehelic Gauge Range 5"-0-5"
REQUEST CALLBACK
-
-
-
- +9
Get Best Quote
Approx. Rs 12,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 10 Piece |
| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Model Name/Number | Model: 2310 |
| Pointer Material | Aluminium Black |
| Window Material | Acrylic |
| Country of Origin | Made in India |
| DWYER MAGNEHELIC GAUGE HSN CODE | 90262000 |
DWYER MAGNEHELIC GAUGE RANGE 5"-0-5"
Dwyer 2310 Magnehelic Differential Pressure Gauge (5-0-5"w.c.)
Model: 2310
Bezel provides flange for flush mounting in panel. Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.
Dwyer 2310 MAGNEHELIC, DIFFERENTIAL PRESSURE GAUGE, 5-0-5
- Precision litho-printed scale is accurate and easy to read.
- Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.
- Pointer stops of molded rubber prevent pointer over-travel without damage.
- "Wishbone" assembly provides mounting for helix, helix bearings and pointer shaft.
- Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.
- Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.
- Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.
- Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.
- Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.
- Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.
- Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.
- Blowout plug of silicone rubber protects against overpressure on 15 psig rated models. Opens at approximately 25 psig.
- O-ring seal for cover assures pressure integrity of case.
Dwyer 2310 Specifications
| Service | Air and non-combustible, compatible gases May be used with hydrogen Pressures must be less than 35 psi |
| Housing | Die cast aluminum case and bezel, with acrylic cover Exterior finish is coated gray to withstand 168 hour salt spray corrosion test |
| Accuracy | ±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100 PA, -125 PA, -10 MM ±4% (-HA ±2%) on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C) |
| Pressure Limits | -20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar) MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar) |
| Enclosure Rating | IP67 |
| Overpressure | Relief plug opens at approximately 25 psig (1.72 bar), standard gages only |
| Temperature Limits | 20 to 140°F (-6.67 to 60°C) -20°F (-28°C) with low temperature option |
| Mounting Orientation | Diaphragm in vertical position |
| Process Connections | ⅛" emale NPT duplicate high and low pressure taps - one pair side and one pair back |
| Dimensions | 4" (101.6 mm) diameter dial face |
What's included with the Dwyer 2310
- Dwyer 2310 Magnehelic Differential Pressure Gauge (5-0-5"w.c.)
Additional Information:
- Item Code: DWYER-MAGNEHELIC-GAUGE-RANGE-5-0-5-INCH
- Production Capacity: www.envirotechdelhi.net
- Delivery Time: www.envirotechindia.info
- Packaging Details: www.envirotechdelhi.info
Yes! I am interested
Dwyer Magnehelic Gauge Range 5 Inch-To-5 Inch
REQUEST CALLBACK
-
-
-
- +9
Get Best Quote
Approx. Rs 12,500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 10 Piece |
| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Mounting | Back |
| Model Name/Number | Model: 2310 |
| Pointer Material | Aluminium Black |
| Window Material | Acrylic |
| Country of Origin | Made in India |
| DWYER MAGNEHELIC GAUGE HSN CODE | 90262000 |
DWYER MAGNEHELIC GAUGE RANGE 5 Inch-To-5 Inch
Dwyer 2310 Magnehelic Differential Pressure Gauge (5-0-5"w.c.)
Model: 2310
Bezel provides flange for flush mounting in panel. Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.
Dwyer 2310 MAGNEHELIC, DIFFERENTIAL PRESSURE GAUGE, 5-0-5
- Precision litho-printed scale is accurate and easy to read.
- Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.
- Pointer stops of molded rubber prevent pointer over-travel without damage.
- "Wishbone" assembly provides mounting for helix, helix bearings and pointer shaft.
- Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.
- Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.
- Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.
- Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.
- Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.
- Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.
- Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.
- Blowout plug of silicone rubber protects against overpressure on 15 psig rated models. Opens at approximately 25 psig.
- O-ring seal for cover assures pressure integrity of case.
Dwyer 2310 Specifications
| Service | Air and non-combustible, compatible gases May be used with hydrogen Pressures must be less than 35 psi |
| Housing | Die cast aluminum case and bezel, with acrylic cover Exterior finish is coated gray to withstand 168 hour salt spray corrosion test |
| Accuracy | ±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100 PA, -125 PA, -10 MM ±4% (-HA ±2%) on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C) |
| Pressure Limits | -20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar) MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar) |
| Enclosure Rating | IP67 |
| Overpressure | Relief plug opens at approximately 25 psig (1.72 bar), standard gages only |
| Temperature Limits | 20 to 140°F (-6.67 to 60°C) -20°F (-28°C) with low temperature option |
| Mounting Orientation | Diaphragm in vertical position |
| Process Connections | ⅛" emale NPT duplicate high and low pressure taps - one pair side and one pair back |
| Dimensions | 4" (101.6 mm) diameter dial face |
What's included with the Dwyer 2310
- Dwyer 2310 Magnehelic Differential Pressure Gauge (5-0-5"w.c.)
Additional Information:
- Item Code: DWYER-MAGNEHELIC-GAUGE-RANGE-5Inch-To-5Inch
- Production Capacity: www.envirotechdelhi.com
- Delivery Time: www.envirotechindia.co.in
- Packaging Details: www.envirotechdelhi.in
Yes! I am interested
DWYER USA MAGNEHELIC GAUGE RANGE 0-20 KPA
REQUEST CALLBACK
-
-
-
- +8
Get Best Quote
Approx. Rs 12,500 / PieceGet Latest Price
Product BrochureProduct Details:| Dial Size | 4 inch / 100 mm |
| Display Type | Analog |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | Dwyer USA |
| Use | Pharmaceutical Industries |
Yes! I am interested
DWYER MAGNEHELIC GAUGE Wholesaler From Nagngli Sakrawati Industrial Area Delhi
REQUEST CALLBACK
-
-
-
- +8
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product BrochureProduct Details:| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
Yes! I am interested
Wholesaler India DWYER DIFFERENTIAL PRESSURE GAUGE From Barmati Maharashtra
REQUEST CALLBACK
-
-
-
- +8
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product Details:| Dial Size | 4 inch / 100 mm |
| Brand | Dwyer Usa |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
Yes! I am interested
Dwyer MAGNEHELIC Differential Pressure Gauge From Krishna Reddy Industrial Area Bengaluru Karnataka
REQUEST CALLBACK
-
-
-
- +8
Get Best Quote
Approx. Rs 8,500 / PieceGet Latest Price
Product Details:| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | Dwyer USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
Yes! I am interested
DWYER MAGNEHELIC GAUGE Wholesaler From Tughlakabad Institution Area Delhi
REQUEST CALLBACK
-
-
-
- +8
Get Best Quote
Approx. Rs 12,500 / PieceGet Latest Price
Product Details:| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
Yes! I am interested
DWYER MAGNEHELIC GAUGE RANGE 0-250 CM
REQUEST CALLBACK
Get Best Quote
Approx. Rs 9,500 / PieceGet Latest Price
Product Details:| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | Dwyer USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
Yes! I am interested
DWYER MAGNEHELIC GAUGE Model 2002 Range 0-2 Inch
REQUEST CALLBACK
Get Best Quote
Approx. Rs 12,500 / PieceGet Latest Price
Product BrochureProduct Details:| Dial Size | 4 inch / 100 mm |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Brand | Dwyer USA |
| Use | Pharmaceutical Industries |
| Display Type | Analog |
Yes! I am interested
Looking for DWYER Around The Globe Contact Information - Enviro Tech Industrial Products ?
X
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- Series 2000 DWYER MAGNEHELIC Differential Pressure Gauges Wholesalers Gurgaon Ballabgarh Bahadurgarh
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
- »
Explore More Products
Contact via E-mail
Contact via SMS
RP SHARMA (Proprietor)
Enviro Tech Industrial Products
Enviro Tech Industrial Products
X-852, Gali No.11,Gandhi, Nagar
New Delhi - 110031, Delhi, India
New Delhi - 110031, Delhi, India
Call Us: Call Response Rate: 80%
© Enviro Tech Industrial Products. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited