Magnehelic Differential Pressure Gauge India

Approx. Rs 7,500 / PieceGet Latest Price

• No Power Required
• Low Cost

• Used in Isolation/ Hospital Environments and Temporary Units (No Power Required)

• Filter Monitoring
• Air Velocity with Dwyer Pitot Tube
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct,Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service:Air And Non-Combustible, Compatible Gases (Natural Gas Option Available). Note: May Be Used With Hydrogen. Order a Buna-N Diaphragm. Pressures Must Be Less Than 35 PSI.
• Wetted Materials:Consult Factory.
• Housing:Die Cast Aluminum Case And Bezel, With Acrylic Cover, Exterior Finish is Coated Gray To Withstand 168 Hour Salt Spray Corrosion Test.
• Accuracy:±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100PA, -125PA, -10MM and ±4% (-HA ±2%) on -00, -60PA, -6MM Ranges), Throughout Range at 70°F (21.1°C).
• Pressure Limits:-20 in Hg. to 15 PSIG.† (-0.677 bar to 1.034 bar); MP Option: 35 PSIG (2.41 Bar), HP Option: 80 PSIG (5.52 Bar).
• Enclosure Rating:IP67.
• Overpressure:Relief Plug Opens At Approximately 25 PSIG (1.72 Bar), Standard Gages Only. See Overpressure Protection Note On Catalog Page.
• Temperature Limits:20 to 140°F (-6.67 to 60°C). -20°F (-28°C) With Low Temperature Option.
• Size:4" (101.6 MM) Diameter Dial Face.
• Mounting Orientation:Diaphragm In Vertical Position. Consult Factory For Other Position Orientations.
• Process Connections:1/8" Female NPT Duplicate High And Low Pressure Taps - One Pair Side And One Pair Back.
• Weight:1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
• Standard Accessories:Two 1/8" NPT Plugs For Duplicate Pressure Taps, Two 1/8" Pipe Thread To Rubber Tubing Adapters And Three Flush Mounting Adapterswith Screws. (Mounting And Snap Ring Retainer Substituted For Three Adapters In MP & HP Gage Accessories.)
• Agency Approval:Meets The Technical Requirements Of EU Directive 2011/65/EU (RoHS II). 
• Note: -SP Models Not RoHS Approved.Note: For Applications With High Cycle Rate Within Gage Total Pressure Rating, Next Higher Rating Is Recommended. See Options Page.

Additional Information:

• Item Code: Magnehelic-DP-Gauge-From-Verna-Industrial-Area-Goa
• Production Capacity: www.envirotechdelhi.co.in
• Delivery Time: www.envirotechdelhi.info
• Packaging Details: www.envirotechdelhi.net

Approx. Rs 6,500 / PieceGet Latest Price

Approx. Rs 8,500 / PieceGet Latest Price

Approx. Rs 8,500 / PieceGet Latest Price

Approx. Rs 8,500 / PieceGet Latest Price

Approx. Rs 6,500 / PieceGet Latest Price

Approx. Rs 5,800 / PieceGet Latest Price

Approx. Rs 5,800 / PieceGet Latest Price

Dwyer Magnehelic Gauge In Keshwana Industrial Area Rajasthan

Approx. Rs 12,500 / PieceGet Latest Price

Approx. Rs 8,500 / PieceGet Latest Price

Approx. Rs 6,500 / PieceGet Latest Price

Approx. Rs 6,500 / PieceGet Latest Price

Approx. Rs 6,500 / PieceGet Latest Price

Approx. Rs 35,000 / NumberGet Latest Price

The Series 605 Magnehelic® Indicating Transmitter provides for both visual monitoring and electronic control of very low differential pressure. The Series 605 is ideal for control applications in building HVAC systems where local indication is desired during routine maintenance checks or necessary when trouble shooting the system. The easily read dial gage is complimented by the two-wire, 4-20 mA control signal utilizing the time-proven Dwyer® Magnehelic® gage mechanical design and Series 600 transmitter technology. The two-wire design with terminal strip on the rear simplifies connection in any 4-20 mA control loop powered by a 10-35 VDC supply.

Approx. Rs 6,500 / PieceGet Latest Price

Approx. Rs 8,500 / NumberGet Latest Price

The Series 616KD Differential Pressure Transmitters with One-Touch® Digital Push- Button Calibration Technology are designed for simplicity, making them the ideal choice for installers and maintenance professionals. These instruments not only alleviate cumbersome turn pots typically found in most transmitters, but eliminate entirely the need to span the instruments during calibration. With a single digital push button, both ZERO AND SPAN are calibrated properly, nothing else is required. No additional reference pressure sources or separate calibration devices are necessary.

• Air handlers,Duct pressure,Variable air volume,Filter monitoring

• Service:Air and non-combustible,compatible gases.
• Wetted Materials:Consult factory.
• Accuracy:616KD-A:±0.25% FS; 616KD-B: ±1% FS, 616KD: ±2% FS.
• Stability:±1% FS/year.
• Temperature Limits:0 to 140°F (-17.8 to 60°C).
• Compensated Temperature Range:20 to 122°F (-6.67 to 50°C).
• Pressure Limits:2 psig (ranges 5" w.c. or lower); 5 psig (ranges 10 to 40" w.c.).
• Thermal Effect:616KD-A:±0.02% FS/°F; 616KD-B: ±0.04% FS/°F; 616KD:±0.06% FS/°F, includes zero and span.
• Power Requirements:4-20 mA output:10 - 35 VDC (2 wire) or 12-26 VAC (4 wire); 5V output:10 - 35 VDC (3 wire) or 12-26 VAC (4 wire); 10V output:13 - 35 VDC (3 wire) or 12-26 VAC (4 wire) for 616KD A and B. 16 to 36 VDC (2 or 3 wire): 20 to 28 VAC (3 wire) for 616KD.
• Output Signal:4 to 20 mA or option with field selectable 0 to 10, 0 to 5, 2 to 10, 1 to 5 V.
• Zero and Span Adjustments:Push button
• Loop Resistance:4 to 20 mA output (DC): 0 to 1250 Ω max. Rmax =50(VpsDC -10) Ω;4 to 20 mA output (AC): 0 to 1200 Ω max. Rmax =50(1.4 VpsAC -12) Ω; Voltage output: 5K Ω minimum
• Current Consumption:24 mA max for 616KD A and B. 21 mA max for 616KD.
• Electrical Connections:Screw-type terminal block.
• Process Connections:Barbed, dual size to fit 1/8" & 3/16" (3 mm and 5 mm) ID rubber or vinyl tubing.
• Enclosure Rating:NEMA 1 (IP20).
• Mounting Orientation:Vertical with pressure connections pointing down.
• Weight:1.8 oz (51 g).
• Agency Approval:CE, optional plenum rated units meet UL Standard 2043

• Simple calibration push-button sets back zero and span, saving time installing and over the service life
• Cost effective and compact device suitable for OEM applications where space, simplicity, and value are key
• Ranges and accuracy selection cover a wide range of applications minimizing components and determining standardizing on design
• Optional 1/8" NPT process connection allows for use with metal barbed fittings or compression fittings for use with metal tubing
• Optional plenum rated units meeting UL Standard 2043 are available.

• A-618 Protective terminal cap
• A-489 4" 303 SS straight static pressure tip with flange.
• SCD-PS 100 to 240 VAC/VDC to 24 VDC power supply.
• A-360 Aluminum DIN rail
• A-302F-A 303 SS Static pressure tip with mounting flange, for 3/16" I.D. rubber or plastic tubing. 4" insertion depth, includes mounting screws
• A-480 Plastic static pressure tip.

Additional Information:

• Item Code: Differential-Pressure-Transmitter
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: www.envirotechindustrialproducts.co.in
• Delivery Time: www.envirotechindustrialproduct.co.in
• Packaging Details: www.envirotechindustrialproduct.in

Approx. Rs 6,500 / PieceGet Latest Price

Approx. Rs 9,500 / PieceGet Latest Price

Approx. Rs 6,500 / PieceGet Latest Price

Approx. Rs 6,500 / PieceGet Latest Price

Approx. Rs 6,500 / PieceGet Latest Price

Approx. Rs 6,500 / PieceGet Latest Price

Approx. Rs 6,500 / PieceGet Latest Price

Approx. Rs 6,500 / PieceGet Latest Price

Approx. Rs 6,500 / PieceGet Latest Price

Magnehelic Differential Pressure Gauge In Mohali punjab

Approx. Rs 6,500 / PieceGet Latest Price

Approx. Rs 6,500 / PieceGet Latest Price

Approx. Rs 6,500 / PieceGet Latest Price

Approx. Rs 6,500 / PieceGet Latest Price

Approx. Rs 6,500 / PieceGet Latest Price

Approx. Rs 18,500 / NumberGet Latest Price

• Flow Elements
• Heat Exchangers
• Filters
• Pumps
• Coils
• Chiller

Approx. Rs 4,500 / NumberGet Latest Price

• Dial size : 4''
• Range - 0 - 6 MM WC
• Range - 0 - 8 MM WC
• Range - 0 - 25 MM WC
• Range - 0 - 50 MM WC
• Range - 0 - 100 MM WC
• Range - 0 - 60 PAC

Additional Information:

• Item Code: DWYER-Mack-Magnehelic-Gauges-0-To-8-MMWC
• Production Capacity: www.envirotechindustrialproduct.info
• Delivery Time: www.envirotechindustrialproductsdelhi.com
• Packaging Details: www.envirotechindustrialproductsindia.in

Approx. Rs 13,500 / NumberGet Latest Price

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Approx. Rs 9,000 / NumberGet Latest Price

• Air handlers
• Duct pressure
• Variable air volume
• Filter monitoring

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: DELHI
• Production Capacity: www.envirotechdelhi.info
• Delivery Time: www.envirotechindia.info
• Packaging Details: www.envirotechdelhi.co.in

Approx. Rs 8,500 / NumberGet Latest Price

• Easy to operate and maintenance
• Compact design
• Enhanced functional life

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 9650264867
• Delivery Time: 9871034100
• Packaging Details: www.envirotechindustrialproduct.co.in

Approx. Rs 18,500 / NumberGet Latest Price

Approx. Rs 6,000 / PieceGet Latest Price

• Precision litho-printed scale is accurate and easy to read.
• Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.
• Pointer stops of molded rubber prevent pointer over-travel without damage.
• "Wishbone" assembly provides mounting for helix, helix bearings and pointer shaft.
• Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.
• Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.
• Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.
• Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.
• Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.
• Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.
• Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.
• Blowout plug of silicone rubber protects against overpressure on 15 psig rated models. Opens at approximately 25 psig.
• O-ring seal for cover assures pressure integrity of case.

Additional Information:

• Item Code: DWYER-Make-Magnehelic-Gauges-0-To-250-MM-WC
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: www.envirotechindustrialproductsdelhi.com
• Delivery Time: www.envirotechindustrialproduct.info
• Packaging Details: www.envirotechindustrialproducts.info

Approx. Rs 3,500 / PieceGet Latest Price

Additional Information:

• Item Code: Low-Pressure-Differential-Gauge
• Production Capacity: www.envirotechindia.info
• Delivery Time: http://www.envirotechdelhi.info
• Packaging Details: www.envirotechindia.net